lkml.org 
[lkml]   [2007]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: 2.6.20 regression: suspend to disk no more works
Date
Hi,

On Monday, 1 January 2007 20:44, Andrey Borzenkov wrote:
> In *the same* configuration STD now fails with "Cannot find swap device". The
> reason is changes in kernel/power/swap.c. In 2.6.19 it did not require valid
> swsusp_resume_device at all - it took first available swap device and saved
> image. Later during resume swsusp_resume_device was set either by command
> line or sysfs and everything worked nicely.
>
> Now swsusp_swap_check() unfortunately checks for swsusp_resume_device at
> *suspend* time:
>
> res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
> if (res < 0)
> return res;
>
> root_swap = res;
> resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE);
> if (IS_ERR(resume_bdev))
> return PTR_ERR(resume_bdev);
>
> but in case of modular driver for swap device this is likely to be undefined.
> This is as of 2.6.20-rc3.

Actually, if you look at the 2.6.19 code, the call to swap_type_of() is there
in swsusp_swap_check() too.

The problem is with open_by_devnum(), I think, which obviously cannot succeed
if swsusp_resume_device is not set. I think we should return resume_bdev from
swsusp_swap_check() like in the appended patch (untested). Pavel?

> I already have seen these reports.

Yes, me too.

> While 'echo a:b > /sys/power/resume' before
> suspend is a workaround, this still breaks perfectly valid setup that worked
> before. Also 'echo a:b > /sys/power/resume' is actually wrong - we are not
> going to resume at this point; but there is no way to just tell kernel "use
> this device for next STD" ... also the error message is misleading, it should
> complaint "no resume device found". Swap is there all right.

Thanks for the report.

Greetings,
Rafael


---
include/linux/swap.h | 2 +-
kernel/power/swap.c | 9 +++++----
kernel/power/user.c | 7 ++++---
mm/swapfile.c | 8 +++++++-
4 files changed, 17 insertions(+), 9 deletions(-)

Index: linux-2.6.20-rc3/include/linux/swap.h
===================================================================
--- linux-2.6.20-rc3.orig/include/linux/swap.h
+++ linux-2.6.20-rc3/include/linux/swap.h
@@ -245,7 +245,7 @@ extern int swap_duplicate(swp_entry_t);
extern int valid_swaphandles(swp_entry_t, unsigned long *);
extern void swap_free(swp_entry_t);
extern void free_swap_and_cache(swp_entry_t);
-extern int swap_type_of(dev_t, sector_t);
+extern int swap_type_of(dev_t, sector_t, struct block_device **);
extern unsigned int count_swap_pages(int, int);
extern sector_t map_swap_page(struct swap_info_struct *, pgoff_t);
extern sector_t swapdev_block(int, pgoff_t);
Index: linux-2.6.20-rc3/kernel/power/swap.c
===================================================================
--- linux-2.6.20-rc3.orig/kernel/power/swap.c
+++ linux-2.6.20-rc3/kernel/power/swap.c
@@ -165,14 +165,15 @@ static int swsusp_swap_check(void) /* Th
{
int res;

- res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
+ res = swap_type_of(swsusp_resume_device, swsusp_resume_block,
+ &resume_bdev);
if (res < 0)
return res;

root_swap = res;
- resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE);
- if (IS_ERR(resume_bdev))
- return PTR_ERR(resume_bdev);
+ res = blkdev_get(resume_bdev, FMODE_WRITE, O_RDWR);
+ if (res)
+ return res;

res = set_blocksize(resume_bdev, PAGE_SIZE);
if (res < 0)
Index: linux-2.6.20-rc3/mm/swapfile.c
===================================================================
--- linux-2.6.20-rc3.orig/mm/swapfile.c
+++ linux-2.6.20-rc3/mm/swapfile.c
@@ -434,7 +434,7 @@ void free_swap_and_cache(swp_entry_t ent
*
* This is needed for the suspend to disk (aka swsusp).
*/
-int swap_type_of(dev_t device, sector_t offset)
+int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
{
struct block_device *bdev = NULL;
int i;
@@ -450,6 +450,9 @@ int swap_type_of(dev_t device, sector_t
continue;

if (!bdev) {
+ if (bdev_p)
+ *bdev_p = sis->bdev;
+
spin_unlock(&swap_lock);
return i;
}
@@ -459,6 +462,9 @@ int swap_type_of(dev_t device, sector_t
se = list_entry(sis->extent_list.next,
struct swap_extent, list);
if (se->start_block == offset) {
+ if (bdev_p)
+ *bdev_p = sis->bdev;
+
spin_unlock(&swap_lock);
bdput(bdev);
return i;
Index: linux-2.6.20-rc3/kernel/power/user.c
===================================================================
--- linux-2.6.20-rc3.orig/kernel/power/user.c
+++ linux-2.6.20-rc3/kernel/power/user.c
@@ -58,7 +58,7 @@ static int snapshot_open(struct inode *i
memset(&data->handle, 0, sizeof(struct snapshot_handle));
if ((filp->f_flags & O_ACCMODE) == O_RDONLY) {
data->swap = swsusp_resume_device ?
- swap_type_of(swsusp_resume_device, 0) : -1;
+ swap_type_of(swsusp_resume_device, 0, NULL) : -1;
data->mode = O_RDONLY;
} else {
data->swap = -1;
@@ -327,7 +327,8 @@ static int snapshot_ioctl(struct inode *
* so we need to recode them
*/
if (old_decode_dev(arg)) {
- data->swap = swap_type_of(old_decode_dev(arg), 0);
+ data->swap = swap_type_of(old_decode_dev(arg),
+ 0, NULL);
if (data->swap < 0)
error = -ENODEV;
} else {
@@ -427,7 +428,7 @@ static int snapshot_ioctl(struct inode *
swdev = old_decode_dev(swap_area.dev);
if (swdev) {
offset = swap_area.offset;
- data->swap = swap_type_of(swdev, offset);
+ data->swap = swap_type_of(swdev, offset, NULL);
if (data->swap < 0)
error = -ENODEV;
} else {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-01-02 00:29    [W:0.222 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site