lkml.org 
[lkml]   [2006]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Linux-usb-users] PROBLEM: Kernel 2.6.x freeze
On Fri, 29 Sep 2006, Paolo Ornati wrote:

> On Thu, 28 Sep 2006 07:33:30 +0000
> Arkadiusz Jalowiec <ajalowiec@interia.pl> wrote:
>
> > OOps:
> >
> > ivalid opcode: 0000 [#1]

> > CPU: 0
> > EIP: 0060: [<d0d184dc>] Not tainted VLI
> > EFLAGS: 00010003 (2.6.18#1)
> > EIP is at uhci_giveback_urb+0x59/0x126 [uhci_hcd]
> > eax: cefeeed1 ebx: cf3935a0 ecx: ce2a9bc0 edx: cf3935a0
> > esi: ce2a9bc0 edi: 00000000 epb: ce4933bc esp: c6b79f00
> > ds: 007b es: 007b ss:0068

> > Code: 5c 89 57 2c 8b 40 44 c7 47 40 00 00 00 00 89
> > 47 3c 8b 45 00 8b 55 04 89 02 89 50 04 89
> > 6d 00 8d 47 18 89 6d 04 39 47 18 75
> > 4b 0f <b6> 47 50 a8 02 88 44 24 08 74 3f 0f b6
> > 46 20 8b 4e 20 ba fe ff

> Can you send the ".config" for this 2.6.18?

Equally important, which version of gcc was used to compile the kernel?

Why are the angle brackets above around <b6>, when the preceding 0f byte
is the actual start of the instruction? Is that merely an artifact of the
way invalid opcode exceptions are reported, or is it an indication of what
went wrong?

> I'm not an expert but...
>
> This is how the code should look like (I've compiled 2.6.18 with gcc
> 3.3.6 + gentoo patches):
>
> c02dd6a2: 74 5c je c02dd700 <uhci_giveback_urb+0xa0>
> c02dd6a4: 0f b6 46 20 movzbl 0x20(%esi),%eax
> c02dd6a8: 8b 4e 20 mov 0x20(%esi),%ecx
> c02dd6ab: c7 04 24 fe ff ff ff movl $0xfffffffe,(%esp)
>
>
> But we have:
>
> 500894: 74 3f je 5008d5 <_end+0x2d>
> 500896: 0f b6 46 20 movzbl 0x20(%rsi),%eax
> 50089a: 8b 4e 20 mov 0x20(%rsi),%ecx
> 50089d: ba .byte 0xba
> 50089e: fe (bad)
> 50089f: ff .byte 0xff
>
>
> So "c7 04 24" turned into
> "ba fe ff"

What do you mean by "we have"? Where did your two disassembly listings
come from? The values in the oops message above don't match either of
your listings, at least not exactly.

> The funny thing is that "fe ff" comes just after "24" in the original
> code...

Arkadiusz, could you please run "objdump -d drivers/usb/host/uhci-hcd.o"
in your kernel source directory, and post the portion of the output for
the uhci_giveback_urb routine?

Alan Stern

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-29 23:31    [W:0.259 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site