lkml.org 
[lkml]   [2006]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [-mm PATCH] RCU: debug sleep check
On Mon, Sep 25, 2006 at 12:05:09AM +0530, Dipankar Sarma wrote:
> This adds an overhead of a function call and local_irq_save/restore
> in the rcu reader path when CONFIG_DEBUG_SPINLOCK_SLEEP is set.
> Hopefully that is not much of a concern. Comments are welcome.
> Applies on top of my earlier patches. The full patchset is
> at http://www.hill9.org/linux/kernel/patches/2.6.18-mm1/.
>
> Add a debug check for rcu read-side critical section code calling
> a function that might sleep which is illegal. The check is enabled only
> if CONFIG_DEBUG_SPINLOCK_SLEEP is set.

Useful for non-CONFIG_PREEMPT kernels!

Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
> Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
> ---
>
>
> include/linux/rcupdate.h | 34 ++++++++++++++++++++++++++++++----
> kernel/rcupdate.c | 33 +++++++++++++++++++++++++++++++++
> kernel/sched.c | 2 +-
> 3 files changed, 64 insertions(+), 5 deletions(-)
>
> diff -puN include/linux/rcupdate.h~rcu-reader-sleep-check include/linux/rcupdate.h
> --- linux-2.6.18-mm1-rcu/include/linux/rcupdate.h~rcu-reader-sleep-check 2006-09-24 23:18:35.000000000 +0530
> +++ linux-2.6.18-mm1-rcu-dipankar/include/linux/rcupdate.h 2006-09-24 23:18:35.000000000 +0530
> @@ -64,6 +64,16 @@ struct rcu_head {
> (ptr)->next = NULL; (ptr)->func = NULL; \
> } while (0)
>
> +#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
> +extern int rcu_read_in_atomic(void);
> +extern void rcu_add_read_count(void);
> +extern void rcu_sub_read_count(void);
> +#else
> +static inline int rcu_read_in_atomic(void) { return 0;}
> +static inline void rcu_add_read_count(void) {}
> +static inline void rcu_sub_read_count(void) {}
> +#endif
> +
> /**
> * rcu_read_lock - mark the beginning of an RCU read-side critical section.
> *
> @@ -93,14 +103,22 @@ struct rcu_head {
> *
> * It is illegal to block while in an RCU read-side critical section.
> */
> -#define rcu_read_lock() __rcu_read_lock()
> +#define rcu_read_lock() \
> + do { \
> + rcu_add_read_count(); \
> + __rcu_read_lock(); \
> + } while (0)
>
> /**
> * rcu_read_unlock - marks the end of an RCU read-side critical section.
> *
> * See rcu_read_lock() for more information.
> */
> -#define rcu_read_unlock() __rcu_read_unlock()
> +#define rcu_read_unlock() \
> + do { \
> + __rcu_read_unlock(); \
> + rcu_sub_read_count(); \
> + } while (0)
>
> /*
> * So where is rcu_write_lock()? It does not exist, as there is no
> @@ -123,14 +141,22 @@ struct rcu_head {
> * can use just rcu_read_lock().
> *
> */
> -#define rcu_read_lock_bh() __rcu_read_lock_bh()
> +#define rcu_read_lock_bh() \
> + do { \
> + rcu_add_read_count(); \
> + __rcu_read_lock_bh(); \
> + } while (0)
>
> /**
> * rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
> *
> * See rcu_read_lock_bh() for more information.
> */
> -#define rcu_read_unlock_bh() __rcu_read_unlock_bh()
> +#define rcu_read_unlock_bh() \
> + do { \
> + __rcu_read_unlock_bh(); \
> + rcu_sub_read_count(); \
> + } while (0)
>
> /**
> * rcu_dereference - fetch an RCU-protected pointer in an
> diff -puN kernel/rcupdate.c~rcu-reader-sleep-check kernel/rcupdate.c
> --- linux-2.6.18-mm1-rcu/kernel/rcupdate.c~rcu-reader-sleep-check 2006-09-24 23:18:35.000000000 +0530
> +++ linux-2.6.18-mm1-rcu-dipankar/kernel/rcupdate.c 2006-09-24 23:18:35.000000000 +0530
> @@ -127,5 +127,38 @@ void __init rcu_init(void)
> __rcu_init();
> }
>
> +#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
> +DEFINE_PER_CPU(int, rcu_read_count);
> +int rcu_read_in_atomic(void)
> +{
> + int val;
> + int cpu = get_cpu();
> + val = per_cpu(rcu_read_count, cpu);
> + put_cpu();
> + return val;
> +}
> +
> +void rcu_add_read_count(void)
> +{
> + int cpu, flags;
> + local_irq_save(flags);
> + cpu = smp_processor_id();
> + per_cpu(rcu_read_count, cpu)++;
> + local_irq_restore(flags);
> +}
> +
> +void rcu_sub_read_count(void)
> +{
> + int cpu, flags;
> + local_irq_save(flags);
> + cpu = smp_processor_id();
> + per_cpu(rcu_read_count, cpu)--;
> + local_irq_restore(flags);
> +}
> +EXPORT_SYMBOL_GPL(rcu_read_in_atomic);
> +EXPORT_SYMBOL_GPL(rcu_add_read_count);
> +EXPORT_SYMBOL_GPL(rcu_sub_read_count);
> +#endif
> +
> EXPORT_SYMBOL_GPL(rcu_barrier);
> EXPORT_SYMBOL_GPL(synchronize_rcu);
> diff -puN kernel/sched.c~rcu-reader-sleep-check kernel/sched.c
> --- linux-2.6.18-mm1-rcu/kernel/sched.c~rcu-reader-sleep-check 2006-09-24 23:18:35.000000000 +0530
> +++ linux-2.6.18-mm1-rcu-dipankar/kernel/sched.c 2006-09-24 23:18:35.000000000 +0530
> @@ -6974,7 +6974,7 @@ void __might_sleep(char *file, int line)
> #ifdef in_atomic
> static unsigned long prev_jiffy; /* ratelimiting */
>
> - if ((in_atomic() || irqs_disabled()) &&
> + if ((in_atomic() || irqs_disabled() || rcu_read_in_atomic()) &&
> system_state == SYSTEM_RUNNING && !oops_in_progress) {
> if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
> return;
>
> _
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-25 20:11    [W:0.103 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site