lkml.org 
[lkml]   [2006]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Sysenter crash with Nested Task Bit set


On Mon, 18 Sep 2006, Andi Kleen wrote:
>
> > If we fix it in the task-switch code, we shouldn't need any other changes
> > (ie Chuck's change is unnecessary too), because then the process that sets
> > NT will happily die (with NT set), but switch away to something else and
> > nobody else will be affected.
>
> Won't it die in the kernel with an oops on the next interrupt?

No. As mentioned, "sysenter" is really special. It should really be the
_only_ entry into the kernel that doesn't change eflags. Everything else
clears NT (and most of them do other things too).

So if a process already runs in kernel mode (or used mode, for that
matter) with NT set, and an interrupt happens, the act of taking the
interrupt will clear NT, and nothing bad happens at all. In fact, we very
much depend on this, exactly because otherwise user mode could just set NT
and just wait for an interrupt, and bad things would happen. They
obviously don't.

So it's literally _only_ the path of

set NT
sysenter
...
iret

that causes problems, because all other paths will clear NT on entry into
the kernel.

> > So if I'm right, then this patch _should_ fix it. UNTESTED (and the
> > "ref_from_fork" special case doesn't clear NT, so it's strictly incompete,
> > but maybe somebody can test this?)
>
> Are you sure this handles interrupts or nested syscalls
> before the context switch correctly?

Yeah, see above. And I have now even tested it slightly (ie I ran one of
my x86 machines with that patch).

> I think it really needs to be handled in the sysenter path.

It really would be much more expensive there (well, the expense would be
the same, but any load that have any amount of either would tend to have
many more system calls than context switches).

The only way to have more context switches than system calls is to run
entirely in user space all the time, and then we don't care - the context
switches will also be so rare that the extra cycles simply don't matter.

> > Andi? I don't know if x86-64 honors NT in 64-bit mode, but if it does, it
> > needs something similar (assuming this works).
>
> It doesn't task switch, but you would get a #GP in IRET at least.
> Leaking that to another process is definitely not good.

Right. Then you need that exact same thing on x86-64 too.

One final note: as I already mentioned, this isn't actually entirely
sufficient. There's the magic special case of "switch to a newly created
thread", which jumps to "ret_from_fork" rather than staying within that
small area. We'll need to add "clear NT" there.

So this (UNTESTED - I tested the previous version, and it works, but this
extends on it) second patch should be more complete. It handles the case
where the NT-dirty task context switches to a newly created task, by just
forcing "eflags" to a known value in the newly created task, rather than
whatever value it had at the time of the context switch.

The addition is fairly obvious, but maybe I screwed something up, so buyer
beware...

Linus

---
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index 37a7d2e..87f9f60 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -209,6 +209,10 @@ ENTRY(ret_from_fork)
GET_THREAD_INFO(%ebp)
popl %eax
CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
CFI_ENDPROC

diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
index 49928eb..defbf12 100644
--- a/include/asm-i386/system.h
+++ b/include/asm-i386/system.h
@@ -13,7 +13,8 @@ extern struct task_struct * FASTCALL(__s

#define switch_to(prev,next,last) do { \
unsigned long esi,edi; \
- asm volatile("pushl %%ebp\n\t" \
+ asm volatile("pushfl\n\t" /* Save flags */ \
+ "pushl %%ebp\n\t" \
"movl %%esp,%0\n\t" /* save ESP */ \
"movl %5,%%esp\n\t" /* restore ESP */ \
"movl $1f,%1\n\t" /* save EIP */ \
@@ -21,6 +22,7 @@ #define switch_to(prev,next,last) do {
"jmp __switch_to\n" \
"1:\t" \
"popl %%ebp\n\t" \
+ "popfl" \
:"=m" (prev->thread.esp),"=m" (prev->thread.eip), \
"=a" (last),"=S" (esi),"=D" (edi) \
:"m" (next->thread.esp),"m" (next->thread.eip), \
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2009-11-18 23:46    [W:0.052 / U:1.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site