lkml.org 
[lkml]   [2006]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH] libsas: move ATA bits into a separate module
Hi all,

Per James Bottomley's request, I've moved all the libsas SATA support
code into a separate module, named sas_ata. To satisfy his further
requirement that libsas not require libata (and vice versa), ata_sas
maintains fixed function pointer tables to various required functions
within libsas and libata. Unfortunately, this means that libsas and
libata both require sas_ata, but sas_ata is smaller than libata.
Unloads of libata/libsas at inopportune moments are prevented by
increasing the refcounts on both modules whenever libsas detects a SATA
device (and decreasing it when the device goes away, of course). If the
module is removed from the .config, then all of hooks into libsas/libata
should go away.

This is a rough-cut at separating out the ATA code; please let me know
what I can improve. At the moment, I can load and talk to SATA disks
with the module enabled, as well as watch nothing happen if the module
is not config'd in.

The patch is a bit large, so here's where it lives:
http://sweaglesw.net/~djwong/docs/sas-ata_2.patch

Thanks for any feedback that you can provide!

--D

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-09-14 02:25    [W:0.760 / U:1.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site