lkml.org 
[lkml]   [2006]   [Sep]   [1]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateFri, 01 Sep 2006 13:48:51 +0300
FromJohnny Strom <>
SubjectRe: Patch to make VIA sata board bootable again.
Andrew Morton wrote:
> On Fri, 01 Sep 2006 11:15:17 +0300
> Johnny Strom <johnny.strom@osp.fi> wrote:
> 
> 
>>
>>Hello
>>
>>The quirks.c update that went into 2.6.16.17 made an VIA machine here 
>>non bootable from an sata drive (via_sata), the error is:
>>
>>"ATA1 qc timout"
>>"Failed to set xfermode".
> 
> 
> argh.
> 
> Does 2.6.18-rc5 work?
> 

No it is the same problem with 2.6.18-rc5.

> 
>>And later kernel panic becouse no sata disk was found.
>>I tracked it down to the quirk update in 2.6.16.17. Below is a patch 
>>against 2.6.17.11 that reverses the uppdate and makse the system 
>>bootable again.
>>
>>Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard 
>>in question but I could not get that info. Dose someone have an idea how 
>>to find that info? then I can provide an patch that adds the right 
>>PCI_DEVICE_ID_VIA for my motherboard.
>
> 
> That's wordwrapped.
> 

Attached an new diff.


    Johnny
diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c linux-2.6.17.11/drivers/pci/quirks.c
--- linux-2.6.17.11-org/drivers/pci/quirks.c	2006-09-01 10:38:31.135747500 +0300
+++ linux-2.6.17.11/drivers/pci/quirks.c	2006-09-01 10:42:28.870605000 +0300
@@ -652,13 +652,7 @@
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
 
 /*
  * VIA VT82C598 has its device ID settable and many BIOSes
\
 
 \ /
  Last update: 2006-09-01 12:51    [from the cache]
©2003-2008