![]() | |||||||||||||
Messages in this thread |
On Fri, 01 Sep 2006 11:15:17 +0300 Johnny Strom <johnny.strom@osp.fi> wrote: > > > Hello > > The quirks.c update that went into 2.6.16.17 made an VIA machine here > non bootable from an sata drive (via_sata), the error is: > > "ATA1 qc timout" > "Failed to set xfermode". argh. Does 2.6.18-rc5 work? > And later kernel panic becouse no sata disk was found. > I tracked it down to the quirk update in 2.6.16.17. Below is a patch > against 2.6.17.11 that reverses the uppdate and makse the system > bootable again. > > Another option is to find out the PCI_DEVICE_ID_VIA for the motherboard > in question but I could not get that info. Dose someone have an idea how > to find that info? then I can provide an patch that adds the right > PCI_DEVICE_ID_VIA for my motherboard. > > > > diff -ur linux-2.6.17.11-org/drivers/pci/quirks.c > linux-2.6.17.11/drivers/pci/quirks.c > --- linux-2.6.17.11-org/drivers/pci/quirks.c 2006-09-01 > 10:38:31.135747500 +0300 > +++ linux-2.6.17.11/drivers/pci/quirks.c 2006-09-01 10:42:28.870605000 +0300 > @@ -652,13 +652,7 @@ > pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); > } > } > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, > quirk_via_irq); > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, > quirk_via_irq); > +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq); > That's wordwrapped. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2006-09-01 10:51 [from the cache] ©2003-2008 | |||||||||||||