lkml.org 
[lkml]   [2006]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 09/10] -mm clocksource: initialize list value
This is an optional change to the clocksource structures. If the list
field is initialized it allows clocksource_register to complete faster
since it doesn't have the scan the list of clocks doing strcmp on each.

Signed-Off-By: Daniel Walker <dwalker@mvista.com>

---
arch/i386/kernel/hpet.c | 1 +
arch/i386/kernel/i8253.c | 1 +
arch/i386/kernel/tsc.c | 1 +
drivers/clocksource/acpi_pm.c | 1 +
drivers/clocksource/cyclone.c | 1 +
drivers/clocksource/scx200_hrt.c | 1 +
include/linux/clocksource.h | 3 +++
7 files changed, 9 insertions(+)

Index: linux-2.6.17/arch/i386/kernel/hpet.c
===================================================================
--- linux-2.6.17.orig/arch/i386/kernel/hpet.c
+++ linux-2.6.17/arch/i386/kernel/hpet.c
@@ -27,6 +27,7 @@ static struct clocksource clocksource_hp
.mult = 0, /* set below */
.shift = HPET_SHIFT,
.is_continuous = 1,
+ .list = CLOCKSOURCE_LIST_INIT(clocksource_hpet.list),
};

static int __init init_hpet_clocksource(void)
Index: linux-2.6.17/arch/i386/kernel/i8253.c
===================================================================
--- linux-2.6.17.orig/arch/i386/kernel/i8253.c
+++ linux-2.6.17/arch/i386/kernel/i8253.c
@@ -105,6 +105,7 @@ static struct clocksource clocksource_pi
.mask = CLOCKSOURCE_MASK(32),
.mult = 0,
.shift = 20,
+ .list = CLOCKSOURCE_LIST_INIT(clocksource_pit.list),
};

static int __init init_pit_clocksource(void)
Index: linux-2.6.17/arch/i386/kernel/tsc.c
===================================================================
--- linux-2.6.17.orig/arch/i386/kernel/tsc.c
+++ linux-2.6.17/arch/i386/kernel/tsc.c
@@ -282,6 +282,7 @@ static struct clocksource clocksource_ts
.mult = 0, /* to be set */
.shift = 22,
.is_continuous = 1,
+ .list = CLOCKSOURCE_LIST_INIT(clocksource_tsc.list),
};

static int tsc_update_callback(void)
Index: linux-2.6.17/drivers/clocksource/acpi_pm.c
===================================================================
--- linux-2.6.17.orig/drivers/clocksource/acpi_pm.c
+++ linux-2.6.17/drivers/clocksource/acpi_pm.c
@@ -73,6 +73,7 @@ static struct clocksource clocksource_ac
.mult = 0, /*to be caluclated*/
.shift = 22,
.is_continuous = 1,
+ .list = CLOCKSOURCE_LIST_INIT(clocksource_acpi_pm.list),
};


Index: linux-2.6.17/drivers/clocksource/cyclone.c
===================================================================
--- linux-2.6.17.orig/drivers/clocksource/cyclone.c
+++ linux-2.6.17/drivers/clocksource/cyclone.c
@@ -32,6 +32,7 @@ static struct clocksource clocksource_cy
.mult = 10,
.shift = 0,
.is_continuous = 1,
+ .list = CLOCKSOURCE_LIST_INIT(clocksource_cyclone.list),
};

static int __init init_cyclone_clocksource(void)
Index: linux-2.6.17/drivers/clocksource/scx200_hrt.c
===================================================================
--- linux-2.6.17.orig/drivers/clocksource/scx200_hrt.c
+++ linux-2.6.17/drivers/clocksource/scx200_hrt.c
@@ -58,6 +58,7 @@ static struct clocksource cs_hrt = {
.read = read_hrt,
.mask = CLOCKSOURCE_MASK(32),
.is_continuous = 1,
+ .list = CLOCKSOURCE_LIST_INIT(cs_hrt.list),
/* mult, shift are set based on mhz27 flag */
};

Index: linux-2.6.17/include/linux/clocksource.h
===================================================================
--- linux-2.6.17.orig/include/linux/clocksource.h
+++ linux-2.6.17/include/linux/clocksource.h
@@ -82,6 +82,9 @@ struct clocksource {
/* simplify initialization of mask field */
#define CLOCKSOURCE_MASK(bits) (cycle_t)(bits<64 ? ((1ULL<<bits)-1) : -1)

+/* Abstracted list initialization */
+#define CLOCKSOURCE_LIST_INIT(x) PLIST_NODE_INIT(x, 0)
+
/**
* clocksource_khz2mult - calculates mult from khz and shift
* @khz: Clocksource frequency in KHz
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-08-04 05:29    [W:0.078 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site