![]() | |||||||||||||
Messages in this thread |
Soeren Sonnenburg wrote:
> Dear all,
>
> I just upgraded to using 2 sata disks (both seagate drives
> ST3400832AS and ST3750640AS) on this asus a7v8x on-board promise fastrak
> 376 (PDC20376) controller. However, as soon as I do a lot of io (cp some
> G of files) I get swamped in
>
> ata1: translated ATA stat/err 0x51/0c to SCSI SK/ASC/ASCQ 0xb/00/00
> ata1: status=0x51 { DriveReady SeekComplete Error }
> ata1: error=0x0c { DriveStatusError }
> ata2: translated ATA stat/err 0x51/0c to SCSI SK/ASC/ASCQ 0xb/00/00
> ata2: status=0x51 { DriveReady SeekComplete Error }
> ata2: error=0x0c { DriveStatusError }
> ...
Is the system usable after these messages?
> messages. For that it is enough to do it on a single drive or copy from
> drive to drive. This is on kernel 2.6.17.4, but I remember (when I was
> still using a single drive) this very same output to happen on 2.6.15.
>
> Can anyone translate these dubious error messages to me ?
>
> Here are more details about the system:
>
> - the sata_promise driver version 1.04 is used
Can you give a shot at 2.6.18-rc4?
--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
| ||||||||||||
| Last update: 2006-08-27 09:41 [from the cache] ©2003-2008 | |||||||||||||