Messages in this thread | | | Date | Wed, 5 Jul 2006 23:43:47 +0200 | From | "J.A. Magallón" <> | Subject | Re: 2.6.17-mm6 |
| |
On Mon, 3 Jul 2006 03:03:55 -0700, Andrew Morton <akpm@osdl.org> wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17/2.6.17-mm6/ > > > - A major update to the e1000 driver. >
Doesn't find my root drive :(.
Its a SATA drive, on PIIX. Last -mm I tried ('cause of the raid problems) was -mm1, so I don't know when did this broke. Under -mm1, the disk is this:
libata version 1.30 loaded. ata_piix 0000:00:1f.2: version 1.10tj1ac3 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 16 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 16 scsi0 : ata_piix ata1: ENTER, pcs=0x13 base=0 ata1: LEAVE, pcs=0x13 present_mask=0x1 ata1.00: cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1.00: ATA-6, max UDMA/133, 390721968 sectors: LBA48 ata1.00: configured for UDMA/133 scsi1 : ata_piix ata2: ENTER, pcs=0x13 base=2 ata2: LEAVE, pcs=0x11 present_mask=0x0 ata2: SATA port has no device. Vendor: ATA Model: ST3200822AS Rev: 3.01 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda
With -mm6, the kernel doesn't find it. I get this on boot:
kinit: try_name sda,1 = dev(8,1) kinit: name_to_dev_t(/dev/sda1) = dev(8.1) kinit: root_dev = dev(8,1) kinit: failed to identify filesystem /dev/root, trying all kinit: trying to mount /dev/root on /root with type ext3 kinit: Cannot open root device dev(8,1)
I have tried to get this message from -mm1, but could not get it in any log. But... I remember to see that the boot message is like:
kinit: try_name sda,1 = sda1(8,1) ^^^^ I have verified I built -mm6 with ext3,sata-piix and so on, all builtin.
Any ideas ?
TIA
-- J.A. Magallon <jamagallon()ono!com> \ Software is like sex: \ It's better when it's free Mandriva Linux release 2007.0 (Cooker) for i586 Linux 2.6.17-jam01 (gcc 4.1.1 20060518 (prerelease)) #2 SMP PREEMPT Wed - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |