lkml.org 
[lkml]   [2006]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.17-mm6


    On 4/07/2006 12:10 a.m., Andrew Morton wrote:
    > On Mon, 03 Jul 2006 23:41:42 +1200
    > Reuben Farrelly <reuben-lkml@reub.net> wrote:
    >
    >> On 3/07/2006 11:39 p.m., Andrew Morton wrote:
    >>> On Mon, 03 Jul 2006 23:00:34 +1200
    >>> Reuben Farrelly <reuben-lkml@reub.net> wrote:
    >>>
    >>>> Allocate Port Service[0000:00:1c.0:pcie0]
    >>>> Allocate Port Service[0000:00:1c.0:pcie0]
    >>> Could we have the full dmesg please?
    >> Sure:
    >
    > Still stumped. Could we have the dmesg for 2.6.17?

    Here's the 2.6.17-git19 dmesg and an lspci -v. I'm not sure if you need me to
    rollback further or not..

    [root@tornado ~]# dmesg
    Bootdata ok (command line is ro root=/dev/md0 panic=60 console=ttyS0,57600)
    Linux version 2.6.17-git19 (root@tornado.reub.net) (gcc version 4.1.1 20060629
    (Red Hat 4.1.1-6)) #1 SMP Mon Jul 3 23:58:06 NZST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
    BIOS-e820: 000000003f670000 - 000000003f6e9000 (ACPI NVS)
    BIOS-e820: 000000003f6e9000 - 000000003f6ec000 (usable)
    BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data)
    BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
    DMI 2.3 present.
    ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
    ACPI: RSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fde48
    ACPI: FADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcf10
    ACPI: MADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fce10
    ACPI: WDDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f90
    ACPI: MCFG (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f10
    ACPI: ASF! (v032 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcd10
    ACPI: HPET (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6e90
    ACPI: SSDT (v001 INTEL CpuPm 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fdc10
    ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fda10
    ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd810
    ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd610
    ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd410
    ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x000000003f670010
    ACPI: DSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x0000000000000000
    On node 0 totalpages: 254558
    DMA zone: 2450 pages, LIFO batch:0
    DMA32 zone: 252108 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:4 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
    Built 1 zonelists. Total pages: 254558
    Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
    time.c: Detected 3000.118 MHz processor.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Checking aperture...
    Memory: 1015088k/1039360k available (2552k kernel code, 22744k reserved, 1640k
    data, 204k init)
    Calibrating delay using timer specific routine.. 6006.39 BogoMIPS (lpj=12012785)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 256
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM1)
    Freeing SMP alternatives: 28k freed
    ACPI: Core revision 20060623
    Using local APIC timer interrupts.
    result 12500432
    Detected 12.500 MHz APIC timer.
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6000.13 BogoMIPS (lpj=12000263)
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU1: Thermal monitoring enabled (TM1)
    Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
    Brought up 2 CPUs
    testing NMI watchdog ... OK.
    migration_cost=10
    checking if image is initramfs... it is
    Freeing initrd memory: 877k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    Boot video device is 0000:00:02.0
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    Intel 82802 RNG detected
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    PCI-GART: No AMD northbridge found.
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
    IO window: 2000-2fff
    MEM window: 48000000-480fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.3
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.4
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.5
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: 1000-1fff
    MEM window: disabled.
    PREFETCH window: disabled.
    Device `[PEX0]' is not power manageable<6>GSI 16 sharing vector 0xA9 and IRQ 16
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    Device `[PEX2]' is not power manageable<6>GSI 17 sharing vector 0xB1 and IRQ 17
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    Device `[PEX3]' is not power manageable<6>GSI 18 sharing vector 0xB9 and IRQ 18
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    Device `[PEX4]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.4[A] ->
    GSI 17 (level, low) -> IRQ 169
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    Device `[PEX5]' is not power manageable<6>GSI 19 sharing vector 0xC1 and IRQ 19
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    audit(1151933576.024:1): initialized
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered (default)
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.5:pcie00]
    Allocate Port Service[0000:00:1c.5:pcie02]
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Getting cpuindex for acpiid 0x3
    ACPI: Getting cpuindex for acpiid 0x4
    Real Time Clock Driver v1.12ac
    hpet_resources: 0xfed00000 is busy
    Linux agpgart interface v0.101 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 185
    0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 185) is a 16550A
    0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 185) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize
    Intel(R) PRO/1000 Network Driver - version 7.0.38-k4-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:60:b4:23
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH7: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
    ICH7: chipset revision 1
    ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
    Probing IDE interface ide0...
    hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    libata version 2.00 loaded.
    ahci 0000:00:1f.2: version 2.0
    Device `[IDES]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1f.2[B] ->
    GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
    ata1: SATA max UDMA/133 cmd 0xFFFFC20000016100 ctl 0x0 bmdma 0x0 irq 58
    ata2: SATA max UDMA/133 cmd 0xFFFFC20000016180 ctl 0x0 bmdma 0x0 irq 58
    ata3: SATA max UDMA/133 cmd 0xFFFFC20000016200 ctl 0x0 bmdma 0x0 irq 58
    ata4: SATA max UDMA/133 cmd 0xFFFFC20000016280 ctl 0x0 bmdma 0x0 irq 58
    scsi0 : ahci
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: configured for UDMA/133
    scsi1 : ahci
    ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2.00: configured for UDMA/133
    scsi2 : ahci
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata3.00: configured for UDMA/133
    scsi3 : ahci
    ata4: SATA link down (SStatus 0 SControl 300)
    Losing some ticks... checking if CPU frequency changed.
    Vendor: ATA Model: ST380817AS Rev: 3.42
    Type: Direct-Access ANSI SCSI revision: 05
    Vendor: ATA Model: ST3300622AS Rev: 3.AA
    Type: Direct-Access ANSI SCSI revision: 05
    Vendor: ATA Model: ST380817AS Rev: 3.42
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
    sd 0:0:0:0: Attached scsi disk sda
    SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 00 3a 00 00
    SCSI device sdb: drive cache: write back
    sdb: sdb1 sdb2 sdb3
    sd 1:0:0:0: Attached scsi disk sdb
    SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
    sdc: Write Protect is off
    sdc: Mode Sense: 00 3a 00 00
    SCSI device sdc: drive cache: write back
    sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
    sd 2:0:0:0: Attached scsi disk sdc
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    Device `[EHCI]' is not power manageable<6>GSI 20 sharing vector 0x42 and IRQ 20
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 66, io mem 0x481a0400
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 66, io base 0x00003080
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 185, io base 0x00003060
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 177, io base 0x00003040
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 193, io base 0x00003020
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    hub 2-1:1.0: USB hub found
    hub 2-1:1.0: 4 ports detected
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    usb 3-2: configuration #1 chosen from 1 choice
    usb 2-1.1: new low speed USB device using uhci_hcd and address 3
    usb 2-1.1: configuration #1 chosen from 1 choice
    usbcore: registered new driver libusual
    usbcore: registered new driver hiddev
    input: Belkin Components Belkin OmniView KVM Switch as /class/input/input0
    input: USB HID v1.00 Keyboard [Belkin Components Belkin OmniView KVM Switch] on
    usb-0000:00:1d.0-1.1
    input: Belkin Components Belkin OmniView KVM Switch as /class/input/input1
    input: USB HID v1.00 Mouse [Belkin Components Belkin OmniView KVM Switch] on
    usb-0000:00:1d.0-1.1
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    md: raid1 personality registered for level 1
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    EDAC MC: Ver: 2.0.0 Jul 3 2006
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
    Freeing unused kernel memory: 204k freed
    md: Autodetecting RAID arrays.
    md: invalid raid superblock magic on sda10
    md: sda10 has invalid sb, not importing!
    md: invalid raid superblock magic on sdc10
    md: sdc10 has invalid sb, not importing!
    md: autorun ...
    md: considering sdc11 ...
    md: adding sdc11 ...
    md: sdc7 has different UUID to sdc11
    md: sdc6 has different UUID to sdc11
    md: sdc5 has different UUID to sdc11
    md: sdc3 has different UUID to sdc11
    md: sdc2 has different UUID to sdc11
    md: adding sda11 ...
    md: sda7 has different UUID to sdc11
    md: sda6 has different UUID to sdc11
    md: sda5 has different UUID to sdc11
    md: sda3 has different UUID to sdc11
    md: sda2 has different UUID to sdc11
    md: created md5
    md: bind<sda11>
    md: bind<sdc11>
    md: running: <sdc11><sda11>
    raid1: raid set md5 active with 2 out of 2 mirrors
    md5: bitmap initialized from disk: read 10/10 pages, set 9 bits, status: 0
    created bitmap (153 pages) for device md5
    md: considering sdc7 ...
    md: adding sdc7 ...
    md: sdc6 has different UUID to sdc7
    md: sdc5 has different UUID to sdc7
    md: sdc3 has different UUID to sdc7
    md: sdc2 has different UUID to sdc7
    md: adding sda7 ...
    md: sda6 has different UUID to sdc7
    md: sda5 has different UUID to sdc7
    md: sda3 has different UUID to sdc7
    md: sda2 has different UUID to sdc7
    md: created md4
    md: bind<sda7>
    md: bind<sdc7>
    md: running: <sdc7><sda7>
    raid1: raid set md4 active with 2 out of 2 mirrors
    md4: bitmap initialized from disk: read 4/4 pages, set 6 bits, status: 0
    created bitmap (61 pages) for device md4
    md: considering sdc6 ...
    md: adding sdc6 ...
    md: sdc5 has different UUID to sdc6
    md: sdc3 has different UUID to sdc6
    md: sdc2 has different UUID to sdc6
    md: adding sda6 ...
    md: sda5 has different UUID to sdc6
    md: sda3 has different UUID to sdc6
    md: sda2 has different UUID to sdc6
    md: created md3
    md: bind<sda6>
    md: bind<sdc6>
    md: running: <sdc6><sda6>
    raid1: raid set md3 active with 2 out of 2 mirrors
    md3: bitmap initialized from disk: read 1/1 pages, set 2 bits, status: 0
    created bitmap (13 pages) for device md3
    md: considering sdc5 ...
    md: adding sdc5 ...
    md: sdc3 has different UUID to sdc5
    md: sdc2 has different UUID to sdc5
    md: adding sda5 ...
    md: sda3 has different UUID to sdc5
    md: sda2 has different UUID to sdc5
    md: created md2
    md: bind<sda5>
    md: bind<sdc5>
    md: running: <sdc5><sda5>
    raid1: raid set md2 active with 2 out of 2 mirrors
    md2: bitmap initialized from disk: read 10/10 pages, set 49 bits, status: 0
    created bitmap (150 pages) for device md2
    md: considering sdc3 ...
    md: adding sdc3 ...
    md: sdc2 has different UUID to sdc3
    md: adding sda3 ...
    md: sda2 has different UUID to sdc3
    md: created md1
    md: bind<sda3>
    md: bind<sdc3>
    md: running: <sdc3><sda3>
    raid1: raid set md1 active with 2 out of 2 mirrors
    md1: bitmap initialized from disk: read 10/10 pages, set 54 bits, status: 0
    created bitmap (150 pages) for device md1
    md: considering sdc2 ...
    md: adding sdc2 ...
    md: adding sda2 ...
    md: created md0
    md: bind<sda2>
    md: bind<sdc2>
    md: running: <sdc2><sda2>
    raid1: raid set md0 active with 2 out of 2 mirrors
    md0: bitmap initialized from disk: read 12/12 pages, set 44 bits, status: 0
    created bitmap (187 pages) for device md0
    md: ... autorun DONE.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: Disabled at runtime.
    SELinux: Unregistering netfilter hooks
    audit(1151933587.676:2): selinux=0 auid=4294967295
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185
    hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
    Uniform CD-ROM driver Revision: 3.20
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    EXT3 FS on md0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: sda8: found reiserfs format "3.6" with standard journal
    ReiserFS: sda8: using ordered data mode
    ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18,
    max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda8: checking transaction log (sda8)
    ReiserFS: sda8: Using r5 hash to sort names
    ReiserFS: sdc8: found reiserfs format "3.6" with standard journal
    ReiserFS: sdc8: using ordered data mode
    ReiserFS: sdc8: journal params: device sdc8, size 8192, journal first block 18,
    max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sdc8: checking transaction log (sdc8)
    ReiserFS: sdc8: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sdb1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sdb2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 248968k swap on /dev/sda9. Priority:-1 extents:1 across:248968k
    Adding 248968k swap on /dev/sdc9. Priority:-2 extents:1 across:248968k
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (4060 buckets, 32480 max) - 288 bytes per conntrack
    e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
    GRE over IPv4 tunneling driver
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    Bluetooth: Core ver 2.8
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.7
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    eth0: no IPv6 routers present
    [root@tornado ~]#
    [root@tornado ~]# lspci -v
    00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller
    Hub (rev 02)
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] Vendor Specific Information

    00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated
    Graphics Controller (rev 02) (prog-if 00 [VGA])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at 48100000 (32-bit, non-prefetchable) [size=512K]
    I/O ports at 30e0 [size=8]
    Memory at 40000000 (32-bit, prefetchable) [size=128M]
    Memory at 48180000 (32-bit, non-prefetchable) [size=128K]
    Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
    Capabilities: [d0] Power Management version 2

    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
    (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: 48000000-480fffff
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
    (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
    (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
    Port 5 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
    Port 6 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
    01) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 66
    I/O ports at 3080 [size=32]

    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
    01) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 185
    I/O ports at 3060 [size=32]

    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
    01) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 177
    I/O ports at 3040 [size=32]

    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
    01) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 193
    I/O ports at 3020 [size=32]

    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
    Controller (rev 01) (prog-if 20 [EHCI])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 66
    Memory at 481a0400 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01
    [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    I/O behind bridge: 00001000-00001fff
    Capabilities: [50] #0d [0000]

    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
    Bridge (rev 01)
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] Vendor Specific Information

    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
    (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: bus master, medium devsel, latency 0, IRQ 177
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at 30b0 [size=16]

    00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA
    Storage Controller AHCI (rev 01) (prog-if 01 [AHCI 1.0])
    Subsystem: Intel Corporation Unknown device 544e
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
    I/O ports at 30c8 [size=8]
    I/O ports at 30ec [size=4]
    I/O ports at 30c0 [size=8]
    I/O ports at 30e8 [size=4]
    I/O ports at 30a0 [size=16]
    Memory at 481a0000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [70] Power Management version 2

    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    Subsystem: Intel Corporation DeskTop Board D945GTP
    Flags: medium devsel, IRQ 185
    I/O ports at 3000 [size=32]

    01:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
    Controller (Copper) (rev 03)
    Subsystem: Intel Corporation Unknown device 3094
    Flags: bus master, fast devsel, latency 0, IRQ 74
    Memory at 48000000 (32-bit, non-prefetchable) [size=128K]
    I/O ports at 2000 [size=32]
    Capabilities: [c8] Power Management version 2
    Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
    Capabilities: [e0] Express Endpoint IRQ 0

    06:03.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART)
    (rev 01) (prog-if 02 [16550])
    Subsystem: Timedia Technology Co Ltd Unknown device 0002
    Flags: stepping, medium devsel, IRQ 185
    I/O ports at 1000 [size=32]

    [root@tornado ~]#


    Reuben
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2006-07-03 15:39    [W:0.069 / U:29.796 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site