lkml.org 
[lkml]   [2006]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: swsusp regression (s2dsk) [Was: 2.6.18-rc2-mm1]
Hi!

> >>>> I have problems with swsusp again. While suspending, the very last thing kernel
> >>>> writes is 'restoring higmem' and then hangs, hardly. No sysrq response at all.
> >>>> Here is a snapshot of the screen:
> >>>> http://www.fi.muni.cz/~xslaby/sklad/swsusp_higmem.gif
> >>>>
> >>>> It's SMP system (HT), higmem enabled (1 gig of ram).
> >>> Most probably it hangs in device_power_up(), so the problem seems to be
> >>> with one of the devices that are resumed with IRQs off.
> >>>
> >>> Does vanila .18-rc2 work?
> >> Yup, it does.
> >
> > Can you try up kernel, no highmem? (mem=512M)?
>
> It writes then:
> p16v: status 0xffffffff, mask 0x00001000, pvoice f7c04a20, use 0
> in endless loop when resuming -- after reading from swap.

Okay, so we have two different problems here.

One is "hang during suspend" with smp/highmem mode, and one is
probably driver problem with p16v (whatever it is).

/data/l/linux/sound/pci/emu10k1/irq.c:
snd_printk(KERN_ERR "p16v: status: 0x%08x, mask=0x%08x, pvoice=%p,
use=%d\n", status2, mask, pvoice, pvoice->use);

...aha, so you may want to unload emu10k1 for testing.

Since you mention radeon in one of your other mails, just try it in
vesafb mode...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-07-30 02:09    [W:0.078 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site