lkml.org 
[lkml]   [2006]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.18-rc2-mm1 timer int 0 doesn't work
On Fri, 28 Jul 2006 13:44:36 -0500
Paul Fulghum <paulkf@microgate.com> wrote:

> 2.6.18-rc2-mm1 causes boot to fail early with:
> kernel panic: IO_APIC timer interrupt 0 doesn't work
>
> 2.6.18-rc2 works.
>
> 2.6.18-rc2-mm1 kernel config located at:
> http://www.microgate.com/ftp/linux/test/config
>
> syslog from working 2.6.18-rc2 located at:
> http://www.microgate.com/ftp/linux/test/syslog
>

I don't know what would have caused this. Was 2.6.18-rc1-mm2 OK?

Patches which touch arch/i386/kernel/io_apic.c are:

x86_64-mm-i386-up-generic-arch.patch
x86_64-mm-i386-io-apic-access.patch
genirq-convert-the-i386-architecture-to-irq-chips.patch
initial-generic-hypertransport-interrupt-support.patch
genirq-i386-irq-remove-the-msi-assumption-that-irq-==-vector.patch
genirq-i386-irq-move-msi-message-composition-into-io_apicc.patch
genirq-i386-irq-dynamic-irq-support.patch

The developers of those patches are cc'ed.

A bisection search would be useful, if you have the time. I'd zero in on
the x86_64 tree initially. Perhaps x86_64-mm-i386-io-apic-access.patch.

Or it could be something else altogether.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-07-28 23:51    [W:0.220 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site