Messages in this thread | | | Subject | RE: Athlon64 + Nforce4 MCE panic | Date | Thu, 13 Jul 2006 21:30:28 -0700 | From | "Allen Martin" <> |
| |
> CPU 0: Machine Check Exception: 0000000000000004 > Bank 4: b200000000070f0f > Kernel panic - not syncing: CPU context corrupt > > I tried to decode this: > > # ./parsemce -e 0000000000000004 -b 4 -s b200000000070f0f -a 0 > Status: (4) Machine Check in progress. > Restart IP invalid. > parsebank(4): b200000000070f0f @ 0 > External tag parity error > CPU state corrupt. Restart not possible > Error enabled in control register > Error not corrected. > Bus and interconnect error > Participation: Generic > Timeout: > Request: Generic error > Transaction type : Invalid > Memory/IO : Other
I'm not sure why parsemce says this is a parity error, it's a K8 virtual northbridge watchdog timeout on an I/O transaction. In other words a CPU PIO transaction to some device timed out, the timeout is usually set to 10s. Prior to K8 these types of errors would usually be system hardlocks.
I've debugged a few of these before and they usually end up being IDE device issues. The IDE controller is really thin (the ATA registers actually reside in the device) so for example if the CPU goes to read the ATA status register of some device and the device doesn't respond, the PCI transaction won't be terminated and the watchdog will fire.
-Allen
----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ----------------------------------------------------------------------------------- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |