Messages in this thread |  | | | Date | Fri, 14 Jul 2006 19:00:25 +1200 | | From | Reuben Farrelly <> | | Subject | Re: 2.6.18-rc1-mm2 |
| |
On 14/07/2006 5:48 p.m., Andrew Morton wrote: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc1/2.6.18-rc1-mm2/ > > - Patches were merged, added, dropped and fixed. Nothing particularly exciting. > > - Added the avr32 architecture. Review is sought, please.
Still seeing problems with this ATA CD-RW device (same one as I had problems with in -mm1).
Alan - is there anything else I can do to help with this one or is it just a case of it being a "Work in progress" ?
ata4: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: ST3300622AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3300622AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 ata_piix 0000:00:1f.1: version 2.00ac6 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x30B0 irq 14 scsi4 : ata_piix ata5.00: ATAPI, max UDMA/66 ata5.00: configured for UDMA/66 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port Losing some ticks... checking if CPU frequency changed. ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/66 ata5: EH complete ata5.00: limiting speed to UDMA/44 ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata5.00: (BMDMA stat 0x24) ata5.00: tag 0 cmd 0xa0 Emask 0x4 stat 0x40 err 0x0 (timeout) ata5: soft resetting port ata5.00: configured for UDMA/44 ata5: EH complete ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30B8 irq 15 scsi5 : ata_piix ata6: port disabled. ignoring. ATA: abnormal status 0xFF on port 0x177 SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB) Thanks, Reuben - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |