lkml.org 
[lkml]   [2006]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: pcmcia IDE broken in 2.6.18-rc1
>> When I insert the card, I get
>>
>> pccard: PCMCIA card inserted into slot 0
>> cs: memory probe 0xe8000000-0xefffffff: excluding
>> 0xe8000000-0xefffffff
>> cs: memory probe 0xc0200000-0xcfffffff: excluding
>> 0xc0200000-0xc11fffff 0xc1a00000-0xc61fffff 0xc6a00000-0xc71fffff
>> 0xc7a00000-0xc81fffff 0xc8a00000-0xc91fffff 0xc9a00000-0xca1fffff
>> 0xcaa00000-0xcb1fffff 0xcba00000-0xcc1fffff 0xcca00000-0xcd1fffff
>> 0xcda00000-0xce1fffff 0xcea00000-0xcf1fffff 0xcfa00000-0xd01fffff
>> pcmcia: registering new device pcmcia0.0
>> PM: Adding info for pcmcia:0.0
>> ide2: I/O resource 0xF887E00E-0xF887E00E not free.
>> ide2: ports already in use, skipping probe
>> ide2: I/O resource 0xF887E01E-0xF887E01E not free.
>> ide2: ports already in use, skipping probe
>> ...
>>
>> it ends with
>>
>> ide-cs: ide_register() at 0xf999c000 & 0xf999c00e, irq 7 failed
>>
>> :-(. Back to 2.6.17 once again, I'm afraid...
>
>Appears to be the same bug as http://lkml.org/lkml/2006/6/15/155

As I am one of the probably few people who have some PCMCIA-IDE-drive (Sony
PCGA-CD51/A), running 2.6.18-rc1 gives me no problems.

pccard: PCMCIA card inserted into slot 0
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
Probind IDE interface ide2...
hde: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
ide2 at 0x180-0x198,0x386 on irq 3
ide-cs: hde: Vpp = 0.0
pcmcia: Detected deprecated PCMCIA ioctl usage from process: hald

Seems fine. I can mount and read it w/o problems.

$ rpm -q pcmciautils
pcmciautils-012-11 (SUSE Linux 10.1)

CONFIG_ISA=y
# CONFIG_RESOURCES_64BIT is not set

Just 2¢, ask for more if needed :)


Jan Engelhardt
--
\
 
 \ /
  Last update: 2006-07-13 20:03    [W:0.064 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site