lkml.org 
[lkml]   [2006]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.6.17-mm5
From
Date
On Sat, 2006-07-01 at 14:30 -0700, Andrew Morton wrote:
> On Sat, 1 Jul 2006 15:24:19 +0100
> Grant Wilson <grant.wilson@zen.co.uk> wrote:
>
> > More RAID1 problems - OOPS on shutdown.

Actually, is there any more of the trace, like what was going on just
before the oops?

It looks very like a lifetime issue (i.e. md thinks the array is dead
and has torn it down, but there's still an outstanding command). It
would be nice to know what the outstanding command might have been.

James


> Thanks. Please copy the mailing lists on these reports - I'm not an MD,
> SCSI or SATA developer, and this is in their area.
>
> > [ 37.482699] md: Autodetecting RAID arrays.
> > [ 37.547908] md: autorun ...
> > [ 37.566449] md: considering sdb2 ...
> > [ 37.589664] md: adding sdb2 ...
> > [ 37.610757] md: adding sda2 ...
> > [ 37.632116] md: created md1
> > [ 37.650587] md: bind<sda2>
> > [ 37.668571] md: bind<sdb2>
> > [ 37.686541] md: running: <sdb2><sda2>
> > [ 37.710807] raid1: raid set md1 active with 2 out of 2 mirrors
> > [ 37.747557] md: ... autorun DONE.
> > [ 37.784444] EXT3-fs: INFO: recovery required on readonly filesystem.
> > [ 37.824275] EXT3-fs: write access will be enabled during recovery.
> > [ 38.814113] kjournald starting. Commit interval 5 seconds
> > [ 38.848761] EXT3-fs: sdc1: orphan cleanup on readonly fs
> > [ 38.985436] EXT3-fs: sdc1: 7 orphan inodes deleted
> > [ 39.015845] EXT3-fs: recovery complete.
> > [ 39.072168] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 44.693986] Adding 995988k swap on /dev/sda1. Priority:-1 extents:1 across:995988k
> > [ 44.744558] Adding 995988k swap on /dev/sdb1. Priority:-2 extents:1 across:995988k
> > [ 44.966034] EXT3 FS on sdc1, internal journal
> > [ 49.305350] device-mapper: ioctl: 4.8.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
> > [ 64.091331] raid1: Disk failure on sdb2, disabling device.
> > [ 64.091333] Operation continuing on 1 devices
> > [ 64.212624] RAID1 conf printout:
> > [ 64.233951] --- wd:1 rd:2
> > [ 64.252195] disk 0, wo:0, o:1, dev:sda2
> > [ 64.277712] disk 1, wo:1, o:0, dev:sdb2
> > [ 64.305627] RAID1 conf printout:
> > [ 64.326977] --- wd:1 rd:2
> > [ 64.345220] disk 0, wo:0, o:1, dev:sda2
> > [
>
> Which device drivers are being used for these disks?
>
> > [ 155.123022] Unable to handle kernel NULL pointer dereference at 0000000000000048 RIP:
> > [ 155.155867] [<ffffffff8047157a>] md_error+0x45/0x91
> > [ 155.200353] PGD 77954067 PUD 726e5067 PMD 0
> > [ 155.226233] Oops: 0000 [1] PREEMPT SMP
> > [ 155.249516] last sysfs file: /devices/system/cpu/cpu0/cpufreq/scaling_setspeed
> > [ 155.292808] CPU 0
> > [ 155.304968] Modules linked in: dm_mod evdev
> > [ 155.330331] Pid: 0, comm: swapper Not tainted 2.6.17-mm5 #1
> > [ 155.363697] RIP: 0010:[<ffffffff8047157a>] [<ffffffff8047157a>] md_error+0x45/0x91
> > [ 155.409638] RSP: 0018:ffffffff807a0c50 EFLAGS: 00010046
> > [ 155.441445] RAX: 0000000000000000 RBX: ffff81007aa34708 RCX: 000000000000003f
> > [ 155.484216] RDX: 00000000fffffffb RSI: ffff81007a821d28 RDI: ffff81007aa34708
> > [ 155.526989] RBP: ffffffff807a0c60 R08: 0000000000000000 R09: ffff81007aac43b0
> > [ 155.569759] R10: ffffffff804221e5 R11: 0000000000000058 R12: ffff81007aac4ab0
> > [ 155.612533] R13: ffff81007aac43b0 R14: ffff81007aac4ab0 R15: 00000000fffffffb
> > [ 155.655303] FS: 00002aeb361606d0(0000) GS:ffffffff80a46000(0000) knlGS:0000000000000000
> > [ 155.703791] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > [ 155.738195] CR2: 0000000000000048 CR3: 0000000070997000 CR4: 00000000000006e0
> > [ 155.780969] Process swapper (pid: 0, threadinfo ffffffff80a64000, task ffffffff80696a00)
> > [ 155.829404] Stack: ffff81007a821d28 ffff81007aa34708 ffffffff807a0c80 ffffffff804728d9
> > [ 155.877840] ffff81007a821d28 ffff81007aa34708 ffffffff807a0cc0 ffffffff8047409c
> > [ 155.922535] 00001000807a0d00 ffff81007aac4ab0 00000000fffffffb ffff81007aac4ab0
> > [ 155.966085] Call Trace:
> > [ 155.982416] [<ffffffff804728d9>] super_written+0x30/0x65
> > [ 156.015292] [<ffffffff8047409c>] super_written_barrier+0xc4/0xd1
> > [ 156.052297] [<ffffffff8023a5a5>] bio_endio+0x56/0x5b
> > [ 156.082688] [<ffffffff8022d21b>] __end_that_request_first+0x1c9/0x4c9
> > [ 156.122068] [<ffffffff8024a0d6>] end_that_request_first+0xc/0xe
> > [ 156.158343] [<ffffffff8036a692>] blk_ordered_complete_seq+0x7c/0x8b
> > [ 156.196705] [<ffffffff8036a6d1>] post_flush_end_io+0x30/0x35
> > [ 156.231419] [<ffffffff8036a5b5>] end_that_request_last+0xd9/0xf6
> > [ 156.268215] [<ffffffff80422204>] scsi_end_request+0xad/0xd7
> > [ 156.302573] [<ffffffff80422637>] scsi_io_completion+0x3e1/0x3f0
> > [ 156.339004] [<ffffffff8042266c>] scsi_blk_pc_done+0x26/0x28
> > [ 156.373357] [<ffffffff8041d11e>] scsi_finish_command+0xa9/0xb2
> > [ 156.409264] [<ffffffff804229f9>] scsi_softirq_done+0xf4/0xfd
> > [ 156.444143] [<ffffffff80237f66>] blk_done_softirq+0x70/0x7f
> > [ 156.478323] [<ffffffff80211366>] __do_softirq+0x67/0xf4
> > [ 156.510224] [<ffffffff8025f95e>] call_softirq+0x1e/0x28
> > [ 156.542083]
> > [ 156.542083] Code: 48 8b 40 48 48 85 c0 74 3f ff d0 f0 0f ba ab e0 01 00 00 03
>
> The barrier code is in there again.
>
> mddev->pers is NULL in md_error(), so the test of
> !mddev->pers->error_handler oopsed. Perhaps this is a real MD bug which is
> now being exposed by the new barrier-handling problem.
>
>
> This should get you further, but...
>
> From: Andrew Morton <akpm@osdl.org>
>
> Cc: Neil Brown <neilb@suse.de>
> Signed-off-by: Andrew Morton <akpm@osdl.org>
> ---
>
> drivers/md/md.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff -puN drivers/md/md.c~md-oops-workaround drivers/md/md.c
> --- a/drivers/md/md.c~md-oops-workaround
> +++ a/drivers/md/md.c
> @@ -4586,6 +4586,8 @@ void md_error(mddev_t *mddev, mdk_rdev_t
> __builtin_return_address(0),__builtin_return_address(1),
> __builtin_return_address(2),__builtin_return_address(3));
> */
> + if (!mddev->pers)
> + return;
> if (!mddev->pers->error_handler)
> return;
> mddev->pers->error_handler(mddev,rdev);
> _
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-07-02 00:28    [W:0.082 / U:9.472 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site