Messages in this thread Patches in this message | | | Date | Tue, 27 Jun 2006 01:57:39 -0400 | From | Chuck Ebbert <> | Subject | Re: 2.6.17.1 new perfmon code base, libpfm, pfmon available |
| |
In-Reply-To: <20060626223716.GA16082@frankl.hpl.hp.com>
On Mon, 26 Jun 2006 15:37:17 -0700, Stephane Eranian wrote:
> > 32-bit works great. Unfortunately, pfmon is far too limited for serious kernel > > monitoring AFAICT. E.g. you can't select edge counting instead of cycle > > counting. So you can count how many clock cycles were spent with interrupts > > I put in an option to enable this mode, do pfmon --help. I think it's called > edge-mask.
Silly me, I was reading the documentation, which doesn't cover this. :) It works:
$ pfmon --system-wide -0 -e interrupts_masked_cycles,interrupts_taken --edge-mask 0,1 -t 10 <session to end in 10 seconds> CPU0 16359 INTERRUPTS_MASKED_CYCLES CPU0 5006 INTERRUPTS_TAKEN
5006 hardware interrupts in 10 seconds, 16359 interrupt-disable events ==> the kernel disabled interrupts 11353 times for critical sections. To get useful results it looks like booting with idle=poll and disabling cpufreq is needed, though, since interrupts_masked_cycles (non-edge mode) counts even when the CPU is halted:
$ pfmon --system-wide -0 -e interrupts_masked_cycles,cpu_clk_unhalted -t 10 <session to end in 10 seconds> CPU0 352020255 INTERRUPTS_MASKED_CYCLES CPU0 65351172 CPU_CLK_UNHALTED
> > And is someone working on kernel profiling tools that use the perfmon2 > > infrastructure on i386? I'd like to see kernel-based profiling that lets > > you use something like the existing 'readprofile' to retrieve results. This > > would be a lot better than the current timer-based profiling. > > > You can do this on your athlon using pfmon already, you need to enable a > different sampling module. Here is an example: > > $ pfmon --smpl-module=inst-hist -ecpu_clk_unhalted -k --long-smpl-period=100000 \ > --resolve-addr --system-wide --session-timeout=10
That produces no output except for column headings. Thinking it was a problem with x86_64 32-bit support, I built a p6 version. I tried both short and long periods on both systems with the same result:
$ pfmon --smpl-module=inst-hist -ecpu_clk_unhalted -k --short-smpl-period=100000 --resolve-addr --system-wide -t 10 only kernel symbols are resolved in system-wide mode <session to end in 10 seconds> # counts %self %cum code address # counts %self %cum code address
And here's what it took to get everything working on Pentium II (seems OK, not thoroughly tested:) _
perfmon: add Pentium II support (family 6 model 3 only.)
--- 2.6.17.1-d4-pfmon.orig/arch/i386/perfmon/perfmon_p6.c +++ 2.6.17.1-d4-pfmon/arch/i386/perfmon/perfmon_p6.c @@ -76,6 +76,9 @@ static int pfm_p6_probe_pmu(void) } switch(cpu_data->x86_model) { + case 3: + PFM_INFO("Pentium II PMU detected"); + break; case 7 ... 11: PFM_INFO("P6 core PMU detected"); break; _ libpfm: Add Pentium II support (family 6 model 3 only.)
--- libpfm-3.2-060621.orig/lib/pfmlib_i386_p6.c +++ libpfm-3.2-060621/lib/pfmlib_i386_p6.c @@ -136,6 +136,7 @@ pfm_i386_p6_detect(void) return PFMLIB_ERR_NOTSUPP; switch(model) { + case 3: /* Pentium II */ case 7: /* Pentium III Katmai */ case 8: /* Pentium III Coppermine */ case 9: /* Mobile Pentium III */ _ pfmon: don't build gen_ia32 sample module if not configured.
--- pfmon-3.2-060621.orig/pfmon/pfmon_smpl.c +++ pfmon-3.2-060621/pfmon/pfmon_smpl.c @@ -61,6 +61,8 @@ static pfmon_smpl_module_t *smpl_modules #endif #ifdef CONFIG_PFMON_I386_P6 &detailed_i386_p6_smpl_module, /* must be first for P6 */ +#endif +#ifdef CONFIG_PFMON_GEN_IA32 &detailed_gen_ia32_smpl_module, /* must be last for I386 */ #endif &inst_hist_smpl_module, /* works for any PMU model */ -- Chuck "You can't read a newspaper if you can't read." --George W. Bush - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |