lkml.org 
[lkml]   [2006]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch][RFC] Disabling per-tgid stats on task exit in taskstats
Shailabh Nagar wrote:
>Jay Lan wrote:
>
>>Shailabh Nagar wrote:
>>
>>
>>>Hi Andrew,
>>>
>>>Two developments on the tgid overhead issue:
>>>
>>>1. The latest results show that overhead is significant
>>>only when the exit rate exceeds roughly 1000 threads/second.
>>>
>>>
>>I worked with Shailabh this week to run various testing and
>>debugging as he requested. I was pulled off to some urgent
>>task yesterday and surprising saw this coming this morning...
>>
>
>Sorry...didn't mean to surprise. I sent you the data last night
>privately with request for comments.
>

Yeah, i saw it, but did not have time to respond before your posting.

>Your testing and help has been very valuable and helped uncover
>two issues: the locking patch (sent separately) and also a
>dependency between taskstats and delay accounting (for which another
>patch is being sent out shortly).
>
>
>>Let's slow it down please. My last testing (after your fix in
>>#2 below) still showed 109% overhead at system time.
>>
>
>True, but my point is that the overhead is at an extremely
>high exit rate. I think the test in which you saw 109% overhead
>ran 5000 iterations of 1000 threads and had an elapsed time of
>294 seconds (with tgid turned off) giving an exit rate of roughly
>8500 exits/second, right ?
>
>My results confirm the high overhead at these exit rates. In fact,
>on the system I used, I see the 649% overhead for the 2200 exits/second case
>even higher than yours) but the point is whether that exit rate
>is a valid design criteria.
>

Agreed. The indeed the deciding factor. The exit rate in the labs
does not help answer this question. I need input from our fields.

>
>>And, the per-thread group processing also increase the rate of ENOBUFS
>>at the receiver.
>>
>
>Could you quantify please ? Also, pls list the exit rate at which
>this happens.
>

I have not posted it nor quantify it because i must bring down the errors
count, or we (CSA) have to explore a different way. So any comparison
on these number at this point does not really help. Again, if the exit rate
is unrealistic, then i need to run a different set of testings. What
sleep_factor did you use? Are those printf() in your new test program
essential?

>
>>I need to check with other guys to find out if 1000 threads/sec
>>indeed unrealistic at our customers' environments. A good
>>design should allow a mechanism to turn off the penalty due to
>>a feature that is not common to everybody. I do not understand
>>your objection.
>>
>
>Only objection is that design shouldn't cater to a case that is
>extremely unlikely in practice. In most situations, there is no
>or insignificant penalty.
>

If this type of exit rate can happen even once a day, the surge may cause
loss of accounting data of other processes. Again, i do not have data
to say either way yet. But i would rather spend time on working on
the ENOBUFS error than running all different tests to argue on the
per-TG switch.

Regards,
- jay

>Perhaps others on the list can also chip in whether this kind of exit
>rate is realistic in some scenarios and where the peformance
>penalty matters (i.e. not system shutdown etc.)
>
>Please note that the exits have to be for multithreaded apps, not
>single-threaded ones for which tgid sending is already turned off.
>
>Thanks,
>Shailabh
>
>
>>Regards,
>> - jay
>>
>>
>>
>>>2. A new patch that modifies the locking used within taskstats,
>>>brings down the overhead of the extreme case quite a bit.
>>>I'll submit the patch along shortly in a separate mail.
>>>
>>>To get back to the effect of exit rate, I modified the fork+exit
>>>benchmark to vary the rate at which exits happened and
>>>ran tests on a 4-way 1.4 GHz x86_64 box. The kernel was 2.6.17,
>>>uses the delay accounting/taskstat patches in 2.6.17-mm1 + the new
>>>locking patch mentioned in 2. above.
>>>
>>>The results show that differential between tgid on and off
>>>starts becoming significant once the exit rate crosses roughly 1000
>>>threads/second. Below that exit rate, the difference is negligible.
>>>Above it, the difference starts climbing rapidly.
>>>
>>>So I guess the question is whether this rate of exit is representative
>>>enough of real life to warrant making any more changes to the existing
>>>patchset, beyond the locking changes in 2. above.
>>>
>>>>From my limited experience, I think this is too high an exit rate
>>>to be worrying about overhead.
>>>
>>>
>>> %ovhd of tgid on over off
>>> (higher is worse)
>>>
>>>Exit User Sys Elapsed
>>>Rate Time Time Time
>>>
>>>2283 25.76 649.41 -0.14
>>>1193 -10.53 88.81 -0.12
>>>963 -11.90 3.28 -0.10
>>>806 -8.54 -0.84 0.16
>>>694 -4.41 2.38 0.03
>>>
>>>Exit Rate: units are threads exiting per second.
>>>Calculated by (#threads_forked+exited)/(elapsed_time)/2
>>>Since app pretty much does only thread create and exit for 10000
>>>threads (1000 threads, 10 iterations), this is a good measure
>>>for exit rate.
>>>
>>>%diff in user, sys, elapsed times calculated using
>>>(tgid_on - tgid_off)/tgid_off * 100
>>>where tgid_on/off times are reported by /usr/bin/time as before.
>>>
>>>Each data point for tgid_on and tgid_off was an average
>>>of 10 runs of the fork+exit benchmark.
>>>The rate of exits was controlled by delaying the individual
>>>threads through a usleep before being allowed to exit.
>>>
>>>Machine was 4-way 1.6GHz x86_64 Opteron.
>>>
>>>"exit_recv -w", the user program consuming the stats, was running
>>>on the side, reading the stats but not writing to a file or
>>>printing to screen.
>>>
>>>
>>
>
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-06-23 22:03    [W:0.196 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site