Messages in this thread | | | Date | Tue, 20 Jun 2006 14:35:29 -0600 | From | "Shaun Jackman" <> | Subject | Re: TL16C752B DUART: MCR_OUT2 disables interrupts |
| |
On 6/20/06, Paul Fulghum <paulkf@microgate.com> > The old 16550 OUT2 output (MCR:3) used to be a truly > independant control output that was commonly used > with an external gate to connect/disconnect the > interrupt request to the ISA bus. > > Reading the TL16C752B datasheet, it seems pretty clear > that this gating is performed internal to the device. > MCR:3 is no longer an independant, general purpose I/O. > > The result is the same though: If you dink around with > MCR:3 you could disable interrupts in either case. > > So I don't see this as more or less of a problem than > other 16550 type devices.
I didn't know of this historic use of the OUT2 pin to disable interrupts. I'll put OUT2 on my list of things not to muck with. Is there any similar historic use of OUT1?
Cheers, Shaun - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |