lkml.org 
[lkml]   [2006]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.6.17-rc5-mm2 09/18] sbp2: remove manipulation of inquiry response
This code became ineffective a few Linux releases ago and is not
required anyway.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Index: linux-2.6.17-rc5-mm2/drivers/ieee1394/sbp2.c
===================================================================
--- linux-2.6.17-rc5-mm2.orig/drivers/ieee1394/sbp2.c 2006-06-01 20:55:42.000000000 +0200
+++ linux-2.6.17-rc5-mm2/drivers/ieee1394/sbp2.c 2006-06-01 20:55:43.000000000 +0200
@@ -2112,33 +2112,6 @@ static unsigned int sbp2_status_to_sense
}

/*
- * This function is called after a command is completed, in order to do any necessary SBP-2
- * response data translations for the SCSI stack
- */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *SCpnt)
-{
- u8 *scsi_buf = SCpnt->request_buffer;
-
- SBP2_DEBUG_ENTER();
-
- if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
- /*
- * Make sure data length is ok. Minimum length is 36 bytes
- */
- if (scsi_buf[4] == 0) {
- scsi_buf[4] = 36 - 5;
- }
-
- /*
- * Fix ansi revision and response data format
- */
- scsi_buf[2] |= 2;
- scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
- }
-}
-
-/*
* This function deals with status writes from the SBP-2 device
*/
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid,
@@ -2477,13 +2450,6 @@ static void sbp2scsi_complete_command(st
}

/*
- * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
- */
- if (SCpnt->result == DID_OK << 16) {
- sbp2_check_sbp2_response(scsi_id, SCpnt);
- }
-
- /*
* If a bus reset is in progress and there was an error, complete
* the command as busy so that it will get retried.
*/
Index: linux-2.6.17-rc5-mm2/drivers/ieee1394/sbp2.h
===================================================================
--- linux-2.6.17-rc5-mm2.orig/drivers/ieee1394/sbp2.h 2006-06-01 20:55:04.000000000 +0200
+++ linux-2.6.17-rc5-mm2/drivers/ieee1394/sbp2.h 2006-06-01 20:55:43.000000000 +0200
@@ -395,9 +395,8 @@ static int sbp2_link_orb_command(struct
static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *));
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *SCpnt);
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
+ unchar *sense_data);
static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
struct unit_directory *ud);
static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-06-02 22:14    [W:0.104 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site