lkml.org 
[lkml]   [2006]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hugetlb: powerpc: Actively close unused htlb regions on vma close
From
Date
On Fri, 2006-06-02 at 09:08 -0500, Adam Litke wrote:
> #define HAVE_ARCH_UNMAPPED_AREA
> #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
> +#define ARCH_HAS_HUGETLB_CLOSE_VMA
>
> #endif
>
> diff -upN reference/include/linux/hugetlb.h
> current/include/linux/hugetlb.h
> --- reference/include/linux/hugetlb.h
> +++ current/include/linux/hugetlb.h
> @@ -85,6 +85,12 @@ pte_t huge_ptep_get_and_clear(struct mm_
> void hugetlb_prefault_arch_hook(struct mm_struct *mm);
> #endif
>
> +#ifndef ARCH_HAS_HUGETLB_CLOSE_VMA
> +#define arch_hugetlb_close_vma(x) 0
> +#else
> +void arch_hugetlb_close_vma(struct vm_area_struct *vma);
> +#endif

Please don't do this ARCH_HAS stuff. Use Kconfig at the very least.
You could also have an arch-specific htlb vma init function that could
be used for other things in the future.

> @@ -297,7 +297,6 @@ void hugetlb_free_pgd_range(struct mmu_g
> start = addr;
> pgd = pgd_offset((*tlb)->mm, addr);
> do {
> - BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr));
> next = pgd_addr_end(addr, end);
> if (pgd_none_or_clear_bad(pgd))
> continue;

Why does this BUG() go away?

> +/*
> + * Called when tearing down a hugetlb vma. See if we can free up any
> + * htlb areas so normal pages can be mapped there again.
> + */
> +void arch_hugetlb_close_vma(struct vm_area_struct *vma)
> +{
> + struct mm_struct *mm = vma->vm_mm;
> + unsigned long i;
> + struct slb_flush_info fi;
> + u16 inuse, hiflush, loflush;
> +
> + if (!mm)
> + return;

Why is this check necessary? Do kernel threads use vmas? ;)

> + inuse = mm->context.low_htlb_areas;
> + for (i = 0; i < NUM_LOW_AREAS; i++)
> + if (prepare_low_area_for_htlb(mm, i) == 0)
> + inuse &= ~(1 << i);

Why check _all_ the areas? Shouldn't the check just be for the current
VMA's area? Also, prepare_low_area_for_htlb() is a pretty silly
function name, especially for its use here. Especially because you are
tearing down a htlb area. low_area_contains_vma() is a bit more apt.

My first thought about what this function is that it should probably be
asking the question, "is the VMA that I'm closing right now that last
one in this segment?"

> + loflush = inuse ^ mm->context.low_htlb_areas;
> + mm->context.low_htlb_areas = inuse;

This bit fiddling should really be done in some helper functions. It
isn't immediately and completely obvious what this is doing.

> + inuse = mm->context.high_htlb_areas;

Are you re-using "inuse"? How about a different variable name for a
different use?

> + for (i = 0; i < NUM_HIGH_AREAS; i++)
> + if (prepare_high_area_for_htlb(mm, i) == 0)
> + inuse &= ~(1 << i);
> + hiflush = inuse ^ mm->context.high_htlb_areas;
> + mm->context.high_htlb_areas = inuse;

This, combined with the other loop, completely rebuild the mm->context's
view into htlb state, right? Isn't that a bit excessive?

> + /* the context changes must make it to memory before the flush,
> + * so that further SLB misses do the right thing. */
> + mb();
> + fi.mm = mm;
> + if ((fi.newareas = loflush))
> + on_each_cpu(flush_low_segments, &fi, 0, 1);
> + if ((fi.newareas = hiflush))
> + on_each_cpu(flush_high_segments, &fi, 0, 1);
> +}

Yikes! Think about a pathological program here. It mmap()s 1 htlb
area, then unmaps it quickly, over and over. What will that perform
like here?

-- Dave

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-06-02 17:20    [W:0.050 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site