Messages in this thread |  | | | From | Juergen Kreileder <> | | Subject | Re: tg3 timeouts with 2.6.17-rc6 | | Date | Fri, 16 Jun 2006 23:20:30 +0200 |
| |
Michael Chan <mchan@broadcom.com> writes:
> Juergen Kreileder > >> I'm seeing frequent network timeouts on my PowerMac G5 Quad with >> 2.6.17-rc6. The timeouts are easily reproducible with moderate >> network traffic, e.g. by using bittorrent. >> > > Did this use to work with an older kernel or older tg3 driver? If > yes, what version?
Works fine with 2.6.16 and earlier.
> Please also provide the full tg3 probing output during modprobe and > ifconfig up. Thanks.
,---- | tg3.c:v3.58 (May 22, 2006) | eth0: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:51:66:ff:b2 | eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] | eth0: dma_rwctrl[76144000] dma_mask[40-bit] | eth1: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:51:66:ff:b3 | eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] | eth1: dma_rwctrl[76144000] dma_mask[40-bit] | [...] | tg3: lan0: Link is up at 1000 Mbps, full duplex. | tg3: lan0: Flow control is on for TX and on for RX. `---- eth0 and eth1 get renamed to lan0 and lan1 by udev. eth0/lan0 is connected to a Gigabit switch eth1/lan1 is not connected. Both interface are controlled by ifplugd (using SIOCETHTOOL for link beat detection).
Let me know if you need more debugging output.
Juergen
-- Juergen Kreileder, Blackdown Java-Linux Team http://blog.blackdown.de/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |