lkml.org 
[lkml]   [2006]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.16-rc6-mm2
Hello.

Andrew Morton wrote:
> On Mon, 12 Jun 2006 17:09:52 -0500
> Steve Fox <drfickle@us.ibm.com> wrote:

>>On Fri, 09 Jun 2006 21:40:24 -0700, Andrew Morton wrote:

>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17-rc6/2.6.17-rc6-mm2/

>>Boot fails on a ppc64 machine.
>>
>>[snip]
>>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>AMD8111: IDE controller at PCI slot 0000:00:04.1
>>AMD8111: chipset revision 3
>>AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller
>>AMD8111: 100% native mode on irq 32
>> ide0: BM-DMA at 0x7c00-0x7c07<3>AMD8111: -- Error, unable to allocate DMA table.
>> ide1: BM-DMA at 0x7c08-0x7c0f<3>AMD8111: -- Error, unable to allocate DMA table.
>>hda: TOSHIBA MK4019GAXB, ATA DISK drive
>>Unable to handle kernel paging request for data at address 0x00000000
>>Faulting instruction address: 0xc000000000301240
>>cpu 0x1: Vector: 300 (Data Access) at [c000000002a13600]
>> pc: c000000000301240: .ide_config_drive_speed+0x228/0x624
>> lr: c0000000002f6c34: .amd_set_drive+0x7c/0x538
>> sp: c000000002a13880
>> msr: 8000000000009032
>> dar: 0
>> dsisr: 40000000
>> current = 0xc00000000ffd6820
>> paca = 0xc000000000590080
>> pid = 1, comm = idle

> Thanks. Reverting the below might fix it.

Frankly speaking, I don't see how that can be possible. I haven't touched
any *real* checks in ide_allocate_dma_engine(), so it should fail regardless
of my patch. I'd rather supposed that pci_alloc_consistent() had failed...

> From: Sergei Shtylylov <sshtylyov@ru.mvista.com>

> Release the DMA engine for the custom mapping IDE drivers also (for
> example, siimage.c does allocate it in both I/O-mapped and custom-mapped
> modes). Remove useless code from the error path of
> ide_allocate_dma_engine().

> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
> Signed-off-by: Andrew Morton <akpm@osdl.org>
> ---

> drivers/ide/ide-dma.c | 16 +++++++---------
> 1 files changed, 7 insertions(+), 9 deletions(-)

> diff -puN drivers/ide/ide-dma.c~ide-always-release-dma-engine drivers/ide/ide-dma.c
> --- devel/drivers/ide/ide-dma.c~ide-always-release-dma-engine 2006-05-11 15:19:36.000000000 -0700
> +++ devel-akpm/drivers/ide/ide-dma.c 2006-05-11 15:19:36.000000000 -0700
> @@ -808,15 +808,14 @@ static int ide_release_iomio_dma(ide_hwi
> /*
> * Needed for allowing full modular support of ide-driver
> */
> -int ide_release_dma (ide_hwif_t *hwif)
> +int ide_release_dma(ide_hwif_t *hwif)
> {
> + ide_release_dma_engine(hwif);
> +
> if (hwif->mmio == 2)
> return 1;
> - if (hwif->chipset == ide_etrax100)
> - return 1;
> -
> - ide_release_dma_engine(hwif);
> - return ide_release_iomio_dma(hwif);
> + else
> + return ide_release_iomio_dma(hwif);
> }
>
> static int ide_allocate_dma_engine(ide_hwif_t *hwif)
> @@ -828,10 +827,9 @@ static int ide_allocate_dma_engine(ide_h
> if (hwif->dmatable_cpu)
> return 0;
>
> - printk(KERN_ERR "%s: -- Error, unable to allocate%s DMA table(s).\n",
> - hwif->cds->name, !hwif->dmatable_cpu ? " CPU" : "");
> + printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n",
> + hwif->cds->name);
>
> - ide_release_dma_engine(hwif);
> return 1;
> }

MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-06-13 16:14    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site