Messages in this thread | | | Date | Wed, 31 May 2006 09:54:59 -0400 | From | "David Corlette" <> | Subject | Message "hidden behind transparent bridge" |
| |
Hello,
I get this message in my dmesg output:
PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently
Booting SuSE Linux Enterprise Desktop 10 B10 on an HP Compaq nc6230.
Full dmesg output is attached (there are some other exceptions and errors if you are interested).
No need for a response; the system seems to work mostly fine.
Thanks!
Linux version 2.6.16-20-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Mon Apr 10 04:51:13 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) BIOS-e820: 000000007ffd0000 - 000000007ffefc00 (reserved) BIOS-e820: 000000007ffefc00 - 000000007fffb000 (ACPI NVS) BIOS-e820: 000000007fffb000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. No mptable found. On node 0 totalpages: 524240 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294864 pages, LIFO batch:31 DMI 2.3 present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 HP ) @ 0x000fe270 ACPI: RSDT (v001 HP 0944 0x22070520 HP 0x00000001) @ 0x7ffefc84 ACPI: FADT (v002 HP 0944 0x00000002 HP 0x00000001) @ 0x7ffefc00 ACPI: MADT (v001 HP 0944 0x00000001 HP 0x00000001) @ 0x7ffefcb8 ACPI: MCFG (v001 HP 0944 0x00000001 HP 0x00000001) @ 0x7ffefd14 ACPI: SSDT (v001 HP HPQPpc 0x00001001 MSFT 0x0100000e) @ 0x7fff7d5b ACPI: DSDT (v001 HP nc6200 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfec01000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda5 splash=silent bootsplash: silent mode. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1862.342 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2073504k/2096960k available (1492k kernel code, 22220k reserved, 606k data, 156k init, 1179456k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3729.63 BogoMIPS (lpj=7459276) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 2318k freed not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI Error (evgpeblk-0284): Unknown GPE method type: C268 (name not of form _Lxx or _Exx) [20060127] ACPI Error (evgpeblk-0284): Unknown GPE method type: C1E8 (name not of form _Lxx or _Exx) [20060127] ACPI Error (evgpeblk-0284): Unknown GPE method type: C269 (name not of form _Lxx or _Exx) [20060127] ACPI Error (evgpeblk-0284): Unknown GPE method type: C26A (name not of form _Lxx or _Exx) [20060127] ACPI Error (evgpeblk-0284): Unknown GPE method type: C1CA (name not of form _Lxx or _Exx) [20060127] ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [C002] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C002] bus is 0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C057._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C06C._PRT] ACPI: Power Resource [C1C8] (on) ACPI: Embedded Controller [C004] (gpe 16) interrupt mode. ACPI: Power Resource [C1A2] (on) ACPI: Power Resource [C1AA] (on) ACPI: Power Resource [C1B1] (on) ACPI: Power Resource [C1C1] (on) ACPI: PCI Interrupt Routing Table [\_SB_.C002.C006._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0DD._PRT] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11) ACPI: PCI Interrupt Link [C0DA] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DC] (IRQs *10 11) ACPI: PCI Interrupt Link [C0EF] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F0] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0F1] (IRQs *10 11) ACPI Exception (pci_link-0182): AE_NOT_FOUND, Evaluating _PRS [20060127] ACPI: Power Resource [C25C] (off) ACPI: Power Resource [C25D] (off) ACPI: Power Resource [C25E] (off) ACPI: Power Resource [C25F] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) Setting up standard PCI resources pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: c8800000-c8bfffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: c8000000-c83fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: 88000000-89ffffff MEM window: 8a000000-8bffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: c8400000-c87fffff PREFETCH window: 88000000-89ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 185 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1149068080.968:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 65472k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:5aad vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47656 bytes,<6>...found (1024x768, 30698 bytes, v3). Console: switching to colour frame buffer device 123x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: PS/2 Controller [PNP0303:C1BE,PNP0f13:C1BF] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 225 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 524288 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI wakeup devices: C06C C0BD C0C4 C0C5 C0C7 C006 C007 C0DD C1CB ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 156k freed Write protecting the kernel read-only data: 281k Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3580-0x3587, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: HTS541060G9AT00, ATA DISK drive hdb: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_acpi_hwif_get_handle: ENTER: device ide0 ide_get_dev_handle: ENTER: pci 00:1f.1 ide_get_dev_handle: for dev=0x1f.1, addr=0x1f0001, parent=0xdff63c00, *handle=0xdffe93c0 ide_acpi_hwif_get_handle: chan adr=0: handle=0xdffe2200 ide_acpi_init: ACPI methods disabled on boot hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [C000] (supports 8 throttling states) Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 ACPI: Thermal Zone [TZ1] (44 C) input: SynPS/2 Synaptics TouchPad as /class/input/input2 ACPI: Thermal Zone [TZ2] (35 C) ACPI: Thermal Zone [TZ3] (25 C) ACPI: Fan [C260] (off) ACPI: Fan [C261] (off) ACPI: Fan [C262] (off) ACPI: Fan [C263] (on) Attempting manual resume input: PS/2 Generic Mouse as /class/input/input3 ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode reiserfs: using flush barriers ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names Adding 2104472k swap on /dev/hda5. Priority:-1 extents:1 across:2104472k parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] tg3.c:v3.49 (Feb 2, 2006) ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:10:00.0 to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:38:1c:f4:54 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 233, io base 0x00003000 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16-20-default uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30 i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x00003020 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16-20-default uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00003040 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16-20-default uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 usb 1-2: new low speed USB device using uhci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Linux agpgart interface v0.101 (c) Dave Jones ieee80211_crypt: module not supported by Novell, setting U taint flag. ieee80211_crypt: registered algorithm 'NULL' ieee80211: module not supported by Novell, setting U taint flag. ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1e.2 to 64 usb 1-2: new device found, idVendor=046d, idProduct=c00c usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: USB Optical Mouse usb 1-2: Manufacturer: Logitech usb 1-2: configuration #1 chosen from 1 choice usb 2-1: new full speed USB device using uhci_hcd and address 2 ipw2200: module not supported by Novell, setting U taint flag. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10 ipw2200: Copyright(c) 2003-2005 Intel Corporation usb 2-1: new device found, idVendor=413c, idProduct=1002 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Dell USB Keyboard Hub usb 2-1: Manufacturer: Dell usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected intel8x0_measure_ac97_clock: measured 55486 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: irq 233, io mem 0xc8c00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.16-20-default ehci_hcd usb usb4: SerialNumber: 0000:00:1d.7 usb usb4: configuration #1 chosen from 1 choice usb 2-1.1: new full speed USB device using uhci_hcd and address 3 hub 4-0:1.0: USB hub found hub 4-0:1.0: 8 ports detected hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 2-1:1.0: cannot disable port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 2-1:1.0: cannot disable port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 2-1:1.0: cannot disable port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: cannot reset port 1 (err = -71) agpgart: Detected an Intel 915GM Chipset. hub 2-1:1.0: cannot reset port 1 (err = -71) hub 2-1:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 2-1:1.0: cannot disable port 1 (err = -71) hub 2-1:1.0: cannot disable port 1 (err = -71) agpgart: AGP aperture is 256M @ 0x0 hub 2-1:1.0: hub_port_status failed (err = -71) hub 2-1:1.0: hub_port_status failed (err = -71) ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 185 hub 2-1:1.0: hub_port_status failed (err = -71) usb 2-1: USB disconnect, address 2 Yenta: CardBus bridge found at 0000:02:06.0 [103c:0944] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:06.0, mfunc 0x01111b22, devctl 0x64 Yenta: ISA IRQ mask 0x0c78, PCI irq 185 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 50 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. hw_random: RNG not detected device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com dm-netlink version 0.0.2 loaded loop: loaded (max 8 devices) ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names NTFS driver 2.1.26 [Flags: R/W MODULE]. NTFS volume version 3.1. AppArmor: AppArmor (version 2.0-19.43r6320) initialized audit(1149068283.656:2): AppArmor (version 2.0-19.43r6320) initialized
NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack ACPI: AC Adapter [C16F] (on-line) ACPI: Battery Slot [C171] (battery present) ACPI: Battery Slot [C170] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C1E9] ACPI: Lid Switch [C1EA] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> IA-32 Microcode Update Driver v1.14 unregistered ADDRCONF(NETDEV_UP): eth0: link is not ready bootsplash: status on console 0 changed to on ADDRCONF(NETDEV_UP): eth1: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready NET: Registered protocol family 17 fglrx: module not supported by Novell, setting U taint flag. fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 1900 MBytes. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [fglrx] module loaded - fglrx 8.24.8 [Apr 11 2006] on minor 0 [fglrx] Maximum main memory to use for locked dma buffers: 1900 MBytes. [fglrx] free PCIe = 54804480 [fglrx] max PCIe = 54804480 [fglrx] free LFB = 55504896 [fglrx] max LFB = 55504896 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 [fglrx] total FB = 0 [fglrx] total PCIe = 16384 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 eth0: no IPv6 routers present SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 audit(:0): major=252 name_count=0: freeing multiple contexts (1) audit(:0): major=113 name_count=0: freeing multiple contexts (2) [fglrx] Maximum main memory to use for locked dma buffers: 1900 MBytes. [fglrx] free PCIe = 54804480 [fglrx] max PCIe = 54804480 [fglrx] free LFB = 55504896 [fglrx] max LFB = 55504896 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 [fglrx] total FB = 0 [fglrx] total PCIe = 16384 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=172.16.2.175 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods st: Version 20050830, fixed bufsize 32768, s/g segs 256 ieee80211_crypt_tkip: module not supported by Novell, setting U taint flag. ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt_ccmp: module not supported by Novell, setting U taint flag. ieee80211_crypt: registered algorithm 'CCMP' pnp: Device 00:04 disabled. parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff parport 0x378: You gave this address, but there is probably no parallel port there! parport0: PC-style at 0x378 [PCSPP,TRISTATE] pnp: Device 00:04 activated. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). pnp: Device 00:04 disabled. parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff parport 0x378: You gave this address, but there is probably no parallel port there! parport0: PC-style at 0x378 [PCSPP,TRISTATE] ppa: Version 2.07 (for Linux 2.4.x) audit(:0): major=252 name_count=0: freeing multiple contexts (1) audit(:0): major=113 name_count=0: freeing multiple contexts (2) SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:14:38:1c:f4:54:00:04:dc:46:87:f4:08:00 SRC=164.99.215.25 DST=172.16.2.175 LEN=278 TOS=0x00 PREC=0x00 TTL=125 ID=57355 PROTO=UDP SPT=1304 DPT=1026 LEN=258 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:14:38:1c:f4:54:00:04:dc:46:87:f4:08:00 SRC=164.99.215.25 DST=172.16.2.175 LEN=278 TOS=0x00 PREC=0x00 TTL=125 ID=15628 PROTO=UDP SPT=1305 DPT=1026 LEN=258
| |