![]() | |||||||||||||
Messages in this thread |
On 5/28/06, Sion Khalaf <Sion@bitband.com> wrote: > Hi Guys, > > Kernel 2.6.15 issue: > I am trying to install 2 x quad NICs,with Intel chipset > into PCI-X slots on Super Micro board H8DC8, With NVIDIA > chipset. > When booting, there is no probing on the kernel for those cards, > and there are no interfaces. > When using grub with the option acpi=off, it works. > > Kernel 2.6.11.6 - same server, works fine, and I can load the e1000 > drivers for the cards. > > Both kernel have very similar .config, and both enabled acpi. > > cat /proc/interrupts shows irq 9 is sharing acpi and the e1000 drives > > Can anyone tell me what is wrong? my guess is a bridge configuration problem due to some bad interaction either with the acpi bios or the acpi kernel code, maybe some of the acpi guys can help you with figuring out what exactly is going on. Jesse - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2006-05-29 07:31 [from the cache] ©2003-2008 | |||||||||||||