lkml.org 
[lkml]   [2006]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.17-rc4-mm3 - kernel panic
    Hi!

    > > Does the panic go away with CONFIG_ACPI_DOCK=n?

    > Can either Pavel or Andreas please try this little debugging patch and
    > send me the dmesg output? Please enable the CONFIG_DEBUG_KERNEL option
    > in your .config as well so that I can get additional info.

    Yep, you were right... this debugging patch helps.
    Pavel

    --
    (english) http://www.livejournal.com/~pavelmachek
    (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
    Linux version 2.6.17-rc4-mm3 (pavel@amd) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #3 SMP PREEMPT Fri May 26 00:04:47 CEST 2006
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
    copy_e820_map() type is E820_RAM
    add_memory_region(0000000000000000, 000000000009f000, 1)
    copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
    add_memory_region(000000000009f000, 0000000000001000, 2)
    copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
    add_memory_region(00000000000dc000, 0000000000024000, 2)
    copy_e820_map() start: 0000000000100000 size: 000000005fe60000 end: 000000005ff60000 type: 1
    copy_e820_map() type is E820_RAM
    add_memory_region(0000000000100000, 000000005fe60000, 1)
    copy_e820_map() start: 000000005ff60000 size: 0000000000017000 end: 000000005ff77000 type: 3
    add_memory_region(000000005ff60000, 0000000000017000, 3)
    copy_e820_map() start: 000000005ff77000 size: 0000000000002000 end: 000000005ff79000 type: 4
    add_memory_region(000000005ff77000, 0000000000002000, 4)
    copy_e820_map() start: 000000005ff80000 size: 0000000000080000 end: 0000000060000000 type: 2
    add_memory_region(000000005ff80000, 0000000000080000, 2)
    copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
    add_memory_region(00000000ff800000, 0000000000800000, 2)
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000005ff60000 (usable)
    BIOS-e820: 000000005ff60000 - 000000005ff77000 (ACPI data)
    BIOS-e820: 000000005ff77000 - 000000005ff79000 (ACPI NVS)
    BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
    BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
    639MB HIGHMEM available.
    895MB LOWMEM available.
    On node 0 totalpages: 393056
    DMA zone: 4096 pages, LIFO batch:0
    Normal zone: 225279 pages, LIFO batch:31
    node 0 zone HighMem misaligned start pfn, enable UNALIGNED_ZONE_BOUNDARIES
    HighMem zone: 163681 pages, LIFO batch:31
    DMI present.
    ACPI: RSDP (v002 IBM ) @ 0x000f6df0
    ACPI: XSDT (v001 IBM TP-1Q 0x00003004 LTP 0x00000000) @ 0x5ff69e78
    ACPI: FADT (v003 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff69f00
    ACPI: SSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x5ff6a0b4
    ACPI: ECDT (v001 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff76e11
    ACPI: TCPA (v001 IBM TP-1Q 0x00003004 PTL 0x00000001) @ 0x5ff76e63
    ACPI: BOOT (v001 IBM TP-1Q 0x00003004 LTP 0x00000001) @ 0x5ff76fd8
    ACPI: DSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 70000000 (gap: 60000000:9f800000)
    Detected 1798.497 MHz processor.
    Built 1 zonelists
    Kernel command line: root=/dev/hda4 resume=/dev/hda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=1 pci=assign-busses rootfstype=ext2
    Unknown boot option `psmouse.psmouse_proto=imps': ignoring
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffe000 (01c17000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour VGA+ 80x50
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1550028k/1572224k available (5054k kernel code, 21060k reserved, 1851k data, 316k init, 654724k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3599.57 BogoMIPS (lpj=7199141)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
    CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 24k freed
    tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
    Parsing all Control Methods:
    Table [DSDT](id 0006) - 1407 Objects with 65 Devices 442 Methods 19 Regions
    Parsing all Control Methods:
    Table [SSDT](id 0004) - 1 Objects with 0 Devices 1 Methods 0 Regions
    ACPI Namespace successfully loaded at root c087ccd8
    ACPI: setting ELCR to 0200 (from 0800)
    evxfevnt-0089 [02] enable : Transition to ACPI mode successful
    CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    migration_cost=0
    PM: Adding info for No Bus:platform
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
    Setting up standard PCI resources
    ACPI: Subsystem revision 20060310
    evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
    evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
    ACPI: Found ECDT
    Completing Region/Field/Buffer/Package initialization:.................................................................................................................................................................................................................................................
    Initialized 18/19 Regions 123/123 Fields 58/58 Buffers 42/49 Packages (1417 nodes)
    Executing all Device _STA and_INI methods:.....................................................................
    69 Devices found - executed 3 _STA, 11 _INI methods
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    PM: Adding info for acpi:acpi
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PM: Adding info for No Bus:pci0000:00
    PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 1180-11bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Boot video device is 0000:01:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    PM: Adding info for pci:0000:00:00.0
    PM: Adding info for pci:0000:00:01.0
    PM: Adding info for pci:0000:00:1d.0
    PM: Adding info for pci:0000:00:1d.1
    PM: Adding info for pci:0000:00:1d.2
    PM: Adding info for pci:0000:00:1d.7
    PM: Adding info for pci:0000:00:1e.0
    PM: Adding info for pci:0000:00:1f.0
    PM: Adding info for pci:0000:00:1f.1
    PM: Adding info for pci:0000:00:1f.3
    PM: Adding info for pci:0000:00:1f.5
    PM: Adding info for pci:0000:00:1f.6
    PM: Adding info for pci:0000:01:00.0
    PM: Adding info for pci:0000:02:00.0
    PM: Adding info for pci:0000:02:00.1
    PM: Adding info for pci:0000:02:00.2
    PM: Adding info for pci:0000:02:01.0
    PM: Adding info for pci:0000:02:02.0
    ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
    ACPI: Power Resource [PUBS] (on)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    irda_init()
    NET: Registered protocol family 23
    Bluetooth: Core ver 2.8
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    PCI: Bridge: 0000:00:01.0
    IO window: 3000-3fff
    MEM window: c0100000-c01fffff
    PREFETCH window: e0000000-e7ffffff
    PCI: Bus 3, cardbus bridge: 0000:02:00.0
    IO window: 00004000-000040ff
    IO window: 00004400-000044ff
    PREFETCH window: e8000000-e9ffffff
    MEM window: c2000000-c3ffffff
    PCI: Bus 7, cardbus bridge: 0000:02:00.1
    IO window: 00004800-000048ff
    IO window: 00004c00-00004cff
    PREFETCH window: ea000000-ebffffff
    MEM window: c4000000-c5ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 4000-8fff
    MEM window: c0200000-cfffffff
    PREFETCH window: e8000000-efffffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI (acpi_bus-0192): Device `CBS0]is not power manageable [20060310]
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI (acpi_bus-0192): Device `CBS1]is not power manageable [20060310]
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
    TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    PM: Adding info for platform:pcspkr
    Simple Boot Flag at 0x35 set to 0x80
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.27 [Flags: R/O DEBUG].
    fuse init (API version 7.6)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    io scheduler deadline registered
    io scheduler cfq registered
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
    acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    Dock station not done being initialized!!!
    acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    radeonfb: Retrieved PLL infos from BIOS
    radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=144.00 Mhz, System=144.00 MHz
    radeonfb: PLL min 12000 max 35000
    PM: Adding info for No Bus:i2c-0
    PM: Adding info for No Bus:i2c-1
    PM: Adding info for No Bus:i2c-2
    PM: Adding info for No Bus:i2c-3
    Non-DDC laptop panel detected
    radeonfb: Monitor 1 type LCD found
    radeonfb: Monitor 2 type no found
    radeonfb: panel ID string: 1024x768
    radeonfb: detected LVDS panel size from BIOS: 1024x768
    radeondb: BIOS provided dividers will be used
    radeonfb: Dynamic Clock Power Management enabled
    Console: switching to colour frame buffer device 102x42
    radeonfb (0000:01:00.0): ATI Radeon LY
    PM: Adding info for platform:vesafb.0
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: ACPI Dock Station Driver
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Using specific hotkey driver
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: Thermal Zone [THM0] (62 C)
    ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
    ibm_acpi: http://ibm-acpi.sf.net/
    ACPI Exception (acpi_bus-0070): AE_NOT_FOUND, No context for object [f7fdb50c] [20060310]
    ibm_acpi: bay device not present
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.101 (c) Dave Jones
    [drm] Initialized drm 1.0.1 20051102
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized radeon 1.24.0 20060225 on minor 0
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    PM: Adding info for platform:serial8250
    ACPI (acpi_bus-0192): Device `AC9M]is not power manageable [20060310]
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    parport0: PC-style at 0x3bc [PCSPP(,...)]
    lp0: using parport0 (polling).
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    PM: Adding info for platform:floppy.0
    loop: loaded (max 8 devices)
    Intel(R) PRO/1000 Network Driver - version 7.0.38-k2
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:b2:13:20
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
    e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
    e100: Copyright(c) 1999-2005 Intel Corporation
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
    CSLIP: code copyright 1989 Regents of the University of California.
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
    Linux video capture interface: v1.00
    bttv: driver version 0.9.16 loaded
    bttv: using 8 buffers with 2080k (520 pages) each for capture
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH4: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    ICH4: chipset revision 1
    ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0...
    hda: HTS541040G9AT00, ATA DISK drive
    PM: Adding info for No Bus:ide0
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    PM: Adding info for ide:0.0
    Probing IDE interface ide1...
    Probing IDE interface ide1...
    hda: max request size: 128KiB
    hda: 78140160 sectors (40007 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100)
    hda: cache flushes supported
    hda: hda1 hda2 hda3 hda4
    libata version 1.30 loaded.
    ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PM: Adding info for ieee1394:fw-host0
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c0211000-c02117ff] Max Packet=[2048] IR/IT contexts=[4/4]
    ieee1394: raw1394: /dev/raw1394 device initialized
    ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    ieee1394: sbp2: Try serialize_io=0 for better performance
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532]
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    cs: IO port probe 0x4000-0x8fff: clean.
    pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
    ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532]
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
    cs: IO port probe 0x4000-0x8fff: clean.
    pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
    pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
    PM: Adding info for platform:i82365.0
    Intel ISA PCIC probe: not found.
    PM: Removing info for platform:i82365.0
    Databook TCIC-2 PCMCIA probe: not found.
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.17-rc4-mm3 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    PM: Adding info for usb:usb1
    usb usb1: configuration #1 chosen from 1 choice
    PM: Adding info for usb:1-0:1.0
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.17-rc4-mm3 uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    PM: Adding info for usb:usb2
    usb usb2: configuration #1 chosen from 1 choice
    PM: Adding info for usb:2-0:1.0
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.17-rc4-mm3 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    PM: Adding info for usb:usb3
    usb usb3: configuration #1 chosen from 1 choice
    PM: Adding info for usb:3-0:1.0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    PM: Adding info for ieee1394:00061b032904c34f
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032904c34f]
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.17-rc4-mm3 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.2
    PM: Adding info for usb:usb4
    usb usb4: configuration #1 chosen from 1 choice
    PM: Adding info for usb:4-0:1.0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    usb 3-1: new device found, idVendor=0a48, idProduct=3260
    usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 3-1: Product: USB Digital Drive
    usb 3-1: Manufacturer: Hewlett-Packard
    PM: Adding info for usb:3-1
    usb 3-1: configuration #1 chosen from 1 choice
    PM: Adding info for usb:3-1:1.0
    usbcore: registered new driver cdc_acm
    drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
    usbcore: registered new driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    PM: Adding info for No Bus:host0
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    usbcore: registered new driver catc
    drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver
    usbcore: registered new driver asix
    usbcore: registered new driver cdc_ether
    usbcore: registered new driver net1080
    usbcore: registered new driver cdc_subset
    usbcore: registered new driver zaurus
    usbcore: registered new driver zd1201
    PM: Adding info for platform:i8042
    serio: i8042 AUX port at 0x60,0x64 irq 12
    PM: Adding info for serio:serio0
    serio: i8042 KBD port at 0x60,0x64 irq 1
    PM: Adding info for serio:serio1
    mice: PS/2 mouse device common for all mice
    input: PC Speaker as /class/input/input0
    input: AT Translated Set 2 keyboard as /class/input/input1
    PM: Adding info for No Bus:i2c-9191
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new driver hci_usb
    Bluetooth: HCI UART driver ver 2.2
    Bluetooth: HCI H4 protocol initialized
    Bluetooth: HCI BCSP protocol initialized
    EDAC MC: Ver: 2.0.0 May 25 2006
    Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    input: PS/2 Generic Mouse as /class/input/input2
    intel8x0_measure_ac97_clock: measured 56004 usecs
    intel8x0: clocking to 48000
    PM: Adding info for ac97:0-0:AD1981B
    usbcore: registered new driver snd-usb-audio
    ALSA device list:
    #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11
    oprofile: using timer interrupt.
    ip_conntrack version 2.4 (8192 buckets, 65536 max) - 172 bytes per conntrack
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    IrCOMM protocol (Dag Brattli)
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO (Voice Link) ver 0.5
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.7
    Bluetooth: BNEP (Ethernet Emulation) ver 1.2
    Bluetooth: BNEP filters: protocol multicast
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211_crypt: registered algorithm 'WEP'
    acpi_processor-0731 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination
    acpi_processor-0731 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S3 S4 S5)
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 316k freed
    Time: acpi_pm clocksource has been installed.
    Attempting manual resume
    swsusp: Resume From Partition 3:1
    PM: Checking swsusp image.
    PM: Resume from disk failed.
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    EXT2-fs warning (device hda4): ext2_fill_super: mounting ext3 filesystem as ext2
    Adding 2136448k swap on /dev/hda1. Priority:-1 extents:1 across:2136448k
    kjournald starting. Commit interval 6000 seconds
    EXT3 FS on hda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    PM: Adding info for No Bus:target0:0:0
    Vendor: HP Model: Digital Drive Rev: 1.00
    Type: Direct-Access ANSI SCSI revision: 00
    PM: Adding info for scsi:0:0:0:0
    sd 0:0:0:0: Attached scsi removable disk sda
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    PM: Adding info for No Bus:target0:0:1
    PM: Removing info for No Bus:target0:0:1
    PM: Adding info for No Bus:target0:0:2
    PM: Removing info for No Bus:target0:0:2
    PM: Adding info for No Bus:target0:0:3
    PM: Removing info for No Bus:target0:0:3
    PM: Adding info for No Bus:target0:0:4
    PM: Removing info for No Bus:target0:0:4
    PM: Adding info for No Bus:target0:0:5
    PM: Removing info for No Bus:target0:0:5
    PM: Adding info for No Bus:target0:0:6
    PM: Removing info for No Bus:target0:0:6
    PM: Adding info for No Bus:target0:0:7
    PM: Removing info for No Bus:target0:0:7
    usb-storage: device scan complete
    pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
    pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
    pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
    cs: IO port probe 0x310-0x380: excluding 0x370-0x377
    cs: IO port probe 0x310-0x380: excluding 0x370-0x377
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    coda_read_super: Bad mount data
    coda_read_super: device index: 0
    coda_read_super: rootfid is (01234567.ffffffff.080519c0.00000000)
    coda_upcall: Venus dead on (op,un) (7.2) flags 10
    Failure of coda_cnode_make for root: error -19
    \
     
     \ /
      Last update: 2006-05-26 00:40    [W:0.056 / U:0.648 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site