lkml.org 
[lkml]   [2006]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [RFT] major libata update
    On Thu, May 18, 2006 at 04:07:58PM -0700, Andrew Morton wrote:
    >
    > Yes it does. I dropped it and got
    >
    > SCSI subsystem initialized
    > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    > ACPI (acpi_bus-0191): Device is not power manageable [20060310]
    > ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
    > ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x217E bmdma 0x2110 irq 19
    > ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x217A bmdma 0x2118 irq 19
    > ata1: SATA port has no device.
    >
    > Then I undropped it and got
    >
    > SCSI subsystem initialized
    > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    > ACPI (acpi_bus-0191): Device is not power manageable [20060310]
    > ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
    > ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x217E bmdma 0x2110 irq 19
    > ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x217A bmdma 0x2118 irq 19
    > ata1.00: ATA-7, max UDMA/133, 321672960 sectors: LBA48 NCQ (depth 0/32)
    > ata1.00: configured for UDMA/133
    > scsi0 : ata_piix
    >
    > and a computer which boots.
    >
    > Look closer, please ;)

    Hello, Andrew.

    I see. It seems that you're reporting two separate problems - your
    PCS register doesn't report presence properly && the TF registers
    report ghost device if the first device is ATAPI. I can reproduce the
    second here, but AFAIK the only controller which had problem with PCS
    persence bits was ESB6300 until now.

    Can you post the result of 'lspci -n' and ata_piix boot probing
    messages with the following patch applied? It would be helpful if you
    tell us how devices are actually connected. Also, where did the patch
    come from? With what comment?

    Thanks.

    diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
    index e3184a7..4ba943e 100644
    --- a/drivers/scsi/ata_piix.c
    +++ b/drivers/scsi/ata_piix.c
    @@ -523,7 +523,7 @@ static unsigned int piix_sata_probe (str
    u8 pcs;

    pci_read_config_byte(pdev, ICH5_PCS, &pcs);
    - DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base);
    + printk("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base);

    /* enable all ports on this ap and wait for them to settle */
    for (i = 0; i < 2; i++) {
    @@ -552,7 +552,7 @@ static unsigned int piix_sata_probe (str
    if (!(ap->flags & PIIX_FLAG_AHCI))
    pci_write_config_byte(pdev, ICH5_PCS, pcs);

    - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
    + printk("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
    ap->id, pcs, present_mask);

    return present_mask;
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2006-05-19 03:17    [W:0.024 / U:0.636 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site