lkml.org 
[lkml]   [2006]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[RFT] major libata update

After much development and review, I merged a massive pile of libata
patches from Tejun Heo and Albert Lee. This update contains the
following major libata

CHANGES:
* Rewritten error handling. This is a major piece of work, even
though it will be rarely seen. The new libata EH provides the
foundation for not only improved error handling, but also new features
such as device hotplug or command queueing. (Tejun Heo)

* PIO-based I/O is now IRQ-driven by default, rather than polled
in a kernel thread. The polling path will continue to exist for
controllers that need it, and other special cases. (Albert Lee)

* Core support for command queueing (Jens Axboe, Tejun Heo)

* Support for NCQ-style command queueing (Jens Axboe, Tejun Heo)

* Increase max-sectors dramatically, for LBA48 devices (Tejun Heo?)

* Other minor changes, from myself and others.

IMPACT:
* If all goes well, this update should improve error handling,
solve several outstanding, difficult-to-solve bugs, and provide a good
foundation for adding some nifty features in the future.

TESTING:
* Although most drivers by count received few operational changes, the
common probe path was updated, so all drivers need fresh "yes, it sees
all my disks" regression testing.

* ahci and sata_sil24 were touched a lot, and so need additional
testing.

* sata_sil and ata_piix also need healthy re-testing of all basic
functionality.

FEEDBACK:
* Please CC linux-ide@vger.kernel.org on all emails and bug reports.

MERGE STATUS:
* Barring major problems in testing, will submit during 2.6.18 merge window.


Patch:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.17-rc4-git2-libata1.patch.bz2
(diff'd against 2.6.17-rc4-git2, but should apply to most recent
2.6.17-rcX[-gitY] kernels)

The 'upstream' branch of

git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

contains the following updates:

drivers/scsi/Makefile | 2
drivers/scsi/ahci.c | 436 ++++---
drivers/scsi/ata_piix.c | 16
drivers/scsi/libata-bmdma.c | 143 ++
drivers/scsi/libata-core.c | 2437 +++++++++++++++++++++++++++++---------------
drivers/scsi/libata-eh.c | 1558 ++++++++++++++++++++++++++++
drivers/scsi/libata-scsi.c | 423 ++++---
drivers/scsi/libata.h | 24
drivers/scsi/pdc_adma.c | 10
drivers/scsi/sata_mv.c | 30
drivers/scsi/sata_nv.c | 6
drivers/scsi/sata_promise.c | 18
drivers/scsi/sata_qstor.c | 13
drivers/scsi/sata_sil.c | 65 -
drivers/scsi/sata_sil24.c | 615 ++++++-----
drivers/scsi/sata_sis.c | 2
drivers/scsi/sata_svw.c | 4
drivers/scsi/sata_sx4.c | 19
drivers/scsi/sata_uli.c | 2
drivers/scsi/sata_via.c | 2
drivers/scsi/sata_vsc.c | 15
drivers/scsi/scsi.c | 18
drivers/scsi/scsi_error.c | 3
drivers/scsi/scsi_lib.c | 2
drivers/scsi/scsi_priv.h | 1
include/linux/ata.h | 34
include/linux/libata.h | 379 ++++--
include/scsi/scsi_cmnd.h | 1
include/scsi/scsi_eh.h | 1
include/scsi/scsi_host.h | 1
30 files changed, 4634 insertions(+), 1646 deletions(-)

Albert Lee:
libata: interrupt driven pio for libata-core
libata: interrupt driven pio for LLD
libata irq-pio: add comments and cleanup
libata irq-pio: rename atapi_packet_task() and comments
libata irq-pio: simplify if condition in ata_dataout_task()
libata irq-pio: cleanup ata_qc_issue_prot()
libata: move atapi_send_cdb() and ata_dataout_task()
[libata irq-pio] reorganize ata_pio_sector() and __atapi_pio_bytes()
[libata irq-pio] reorganize "buf + offset" in ata_pio_sector()
[libata irq-pio] use PageHighMem() to optimize the kmap_atomic() usage
libata irq-pio: misc fixes
libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block()
libata irq-pio: add read/write multiple support
libata-dev: determine err_mask when error is found
libata-dev: filter out noisy ATAPI error messages
libata-dev: Fix array index value in ata_rwcmd_protocol()
libata-dev: Use new ata_queue_pio_task() for PIO polling task
libata-dev: Use new AC_ERR_* flags
libata-dev: Minor comment fix
libata-dev: recognize WRITE_MULTI_FUA_EXT for r/w multiple
libata-dev: Remove trailing whitespaces
libata-dev: Fix merge problem with upstream
libata-dev: Remove atapi_packet_task()
libata-dev: Move out the HSM code from ata_host_intr()
libata-dev: Minor fix for ata_hsm_move() to work with ata_host_intr()
libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio
libata-dev: Convert ata_pio_task() to use the new ata_hsm_move()
libata-dev: Cleanup unused enums/functions
libata-dev: ata_check_atapi_dma() fix for ATA_FLAG_PIO_POLLING LLDDs
libata-dev: Make the the in_wq check as an inline function
libata-dev: irq-pio minor fixes (respin)
libata-dev: fix the device err check sequence (respin)
libata-dev: wait idle after reading the last data block
libata-dev: print out information for ATAPI devices with CDB interrupts
libata-dev: handle DRQ=1 ERR=1 (revised)
libata-dev: irq-pio minor fix
libata-dev: irq-pio minor fix 2
libata: convert ATAPI_ENABLE_DMADIR to module parameter

Bastiaan Jacques:
ahci: add support for VIA VT8251

Jeff Garzik:
[libata irq-pio] build fix
[libata pdc_adma] update for removal of ATA_FLAG_NOINTR
[libata pdc_adma] fix for new irq-driven PIO code
[libata sata_mv] IRQ PIO build fix
[libata] irq-pio: fix breakage related to err_mask merge
[libata sata_promise] irq_pio: fix merge bug
[libata] build fix after merging some pre-packet_task-removal code
[libata irq-pio] s/assert/WARN_ON/
[libata] build fix after cdb_len move
sata_vsc build fix
libata: irq-pio build fixes
[libata] irq-pio: fix build breakage
[libata] irq-pio: Fix merge mistake
[libata] kill bogus cut-n-pasted comments in three drivers
[libata] bump versions
libata: Fix EH merge difference between this branch and upstream.
libata: Add helper ata_shost_to_port()

Luben Tuikov:
SCSI: Introduce scsi_req_abort_cmd (REPOST)

Tejun Heo:
libata: increase LBA48 max sectors to 65535
libata: fix ata_set_mode() return value
libata: make ata_bus_probe() return negative errno on failure
libata: separate out ata_spd_string()
libata: convert do_probe_reset() to ata_do_reset()
libata: implement ata_dev_enabled and disabled()
libata: make ata_set_mode() handle no-device case properly
libata: reorganize ata_set_mode()
libata: don't disable devices from ata_set_mode()
libata: preserve SATA SPD setting over hard resets
libata: implement ata_dev_absent()
libata: implement ap->sata_spd_limit and helpers
libata: use SATA speed down in ata_drive_probe_reset()
libata: add 5s sleep between resets
libata: implement ata_down_xfermask_limit()
libata: improve ata_bus_probe()
libata: consider disabled devices in ata_dev_xfermask()
libata: report device number when PIO fails
libata: ata_dev_revalidate() printk update
libata: ATA_FLAG_IN_EH is not used, kill it
libata: clean up constants
libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED
libata: clear only affected flags during ata_dev_configure()
libata: clear ATA_DFLAG_PIO before setting it
libata: add ATA_QCFLAG_IO
libata: pass qc around intead of ap during PIO
libata: always generate sense if qc->err_mask is non-zero
libata: don't read TF directly from sense generation functions
libata: add @cdb to ata_exec_internal()
libata: dec scmd->retries for qcs with zero err_mask
libata: separate out libata-eh.c
libata: make some libata-core routines extern
libata: print SControl in SATA link status info message
ahci: do not fail softreset if PHY reports no device
libata: set default cbl in probeinit
libata: kill @verbose from ata_reset_fn_t
libata: make reset methods complain when they fail
sata_sil24: fix timeout calculation in sil24_softreset
sata_sil24: better error message from softreset
libata: implement ata_wait_register()
ahci: use ata_wait_register()
sata_sil24: use ata_wait_register()
libata: disable failed devices only once in ata_bus_probe()
libata: cosmetic update to ata_bus_probe()
libata: export ata_set_sata_spd()
sata_sil24: typo fix
sata_sil24: rename PORT_IRQ_SDB_FIS to PORT_IRQ_SDB_NOTIFY
sata_sil24: add more constants
sata_sil24: consolidate host flags into SIL24_COMMON_FLAGS
sata_sil24: implement loss of completion interrupt on PCI-X errta fix
sata_sil24: implement sil24_init_port()
sata_sil24: put port into known state before softresetting
sata_sil24: kill 10ms sleep in softreset
sata_sil24: reimplement hardreset
sata_sil24: don't do hardreset during driver initialization
sata_sil24: fix on-memory structure byteorder
sata_sil24: enable 64bit
SCSI: implement shost->host_eh_scheduled
libata: silly fix in ata_scsi_start_stop_xlat()
libata: rename ata_down_sata_spd_limit() and friends
ahci: hardreset classification fix
libata: unexport ata_scsi_error()
libata: kill duplicate prototypes
libata: fix ->phy_reset class code handling in ata_bus_probe()
libata: clear ap->active_tag atomically w.r.t. command completion
libata: hold host_set lock while finishing internal qc
libata: use preallocated buffers
libata: move ->set_mode() handling into ata_set_mode()
libata: remove postreset handling from ata_do_reset()
libata: implement qc->result_tf
sata_sil24: update TF image only when necessary
libata: init ap->cbl to ATA_CBL_SATA early
libata: implement new SCR handling and port on/offline functions
libata: use new SCR and on/offline functions
libata: kill old SCR functions and sata_dev_present()
libata: add dev->ap
libata: use dev->ap
libata: implement ATA printk helpers
libata: use ATA printk helpers
libata-eh-fw: add flags and operations for new EH
libata-eh-fw: clear SError in ata_std_postreset()
libata-eh-fw: use special reserved tag and qc for internal commands
libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownership
libata-eh-fw: implement new EH scheduling via error completion
libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort()
libata-eh-fw: implement freeze/thaw
libata-eh-fw: implement new EH scheduling from PIO
libata-eh-fw: update ata_scsi_error() for new EH
libata-eh-fw: update ata_exec_internal() for new EH
libata-eh-fw: update SCSI command completion path for new EH
libata-eh: add ATA and libata flags for new EH
libata-eh: implement dev->ering
libata-eh: implement ata_eh_info and ata_eh_context
libata-eh: implement new EH
libata-eh: implement BMDMA EH
ata_piix: convert to new EH
sata_sil: convert to new EH
ahci: convert to new EH
ahci: add PIOS interim interrupt handling
sata_sil24: convert to new EH
libata: fix irq-pio merge
libata-ncq: add NCQ related ATA/libata constants and macros
libata-ncq: pass ata_scsi_translate() return value to SCSI midlayer
libata-ncq: rename ap->qactive to ap->qc_allocated
libata-ncq: implement ap->qc_active, ap->sactive and complete helper
libata-ncq: implement NCQ command translation and exclusion
libata-ncq: update EH to handle NCQ
libata-ncq: implement NCQ device configuration
ahci: clean up AHCI constants in preparation for NCQ
ahci: add HOST_CAP_NCQ constant
ahci: kill pp->cmd_tbl_sg
ahci: implement NCQ suppport
sata_sil24: implement NCQ support

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-05-15 19:02    [W:0.150 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site