lkml.org 
[lkml]   [2006]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Updated libata PATA patch

Alan,

I just tried to use the IDE2 patches to 2.6.17-rc3 tonight. I've got
an old Dell Precision 610, Dual 550Mhz Xeon, 768mb of RAM. My root
disk is SCSI, with hda a Samsung DVD/ROM, CDRW drive. I've got an
HPT302 controller with a pair of 120gb IDE disks. I've also got an
addon PCI USB/Firewire Card, an old Cyclom-Y ISA serial port card,
Matrox G450 AGP card, builtin Adaptec SCSI cards, DLT 7000 tape
drive. Probably other stuff as well.

Here's the lspci output:

> lspci
0000:00:00.0 Host bridge: Intel Corporation 440GX - 82443GX Host bridge
0000:00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX AGP bridge
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0d.0 RAID bus controller: Triones Technologies, Inc. HPT302 (rev 01)
0000:00:0e.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
0000:00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
0000:00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. G400/G450 (rev 82)
0000:02:06.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 13)
0000:02:0a.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891
0000:02:0e.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
0000:03:08.0 USB Controller: NEC Corporation USB (rev 41)
0000:03:08.1 USB Controller: NEC Corporation USB (rev 41)
0000:03:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
0000:03:0b.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)



n> cat /proc/interrupts
CPU0 CPU1
0: 237231 227203 IO-APIC-edge timer
1: 1213 2640 IO-APIC-edge i8042
8: 3 1 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
11: 2265 2258 IO-APIC-edge Cyclom-Y
12: 10217 2344 IO-APIC-edge i8042
14: 7934 7911 IO-APIC-edge ide0
16: 395587 368729 IO-APIC-level ide2, ide3, ehci_hcd:usb1, mga@pci:0000:01:00.0
17: 3559 1 IO-APIC-level Ensoniq AudioPCI, ohci1394, eth0
18: 7146 4967 IO-APIC-level aic7xxx, aic7xxx, ohci_hcd:usb2
19: 174376 184174 IO-APIC-level uhci_hcd:usb3, ohci_hcd:usb4
NMI: 0 0
LOC: 464327 464326
ERR: 0
MIS: 0


Booting up it was *slow*... slower than normal. I got the following
oops, copied down from a photo I took, since it didn't end up getting
written to disk.

.
.
.
irq 16: nobody cared (try booting with the "irqpoll" option)
<c013d034> __report_bad_irq_0x24/0x90 <c013d13f> note_interrupt+0x9f/0x260
<c031ab78> usb_hcd_irq+0x28/0x60 <c013c993> handle_IRQ_event+0x33/0x70
<c013ca64> __do_IRQ+0xf4/0x100 <c0105909> do_IRQ+0x19/0x30
<c0103962> common_interrupt+0x1a/0x20 <c0101b80> default_idle+0x0/0x60
<c010bac> default_idle+0x2c/0x60 <c0101c48> cpu_idle+0x68/0x90
<c0542729> start_kernel+0x289/0x400 <c0542230> unknown_bootoption+0x0/0x270
handlers:
[<c0302d20>] (ata_interrupt+0x0/0x150)
[c031ab50>] (usb_hcd_irq+0x0/0x60)
Disabling IRQ #16


Please let me know if there's any more information I can provide.
I'll try to get a serial cable on there so I can capture the boot log
better to another host, but no sure when I'll be able to do this.

John

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-05-12 04:37    [W:0.140 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site