Messages in this thread | | | Subject | Re: Genius VideoWonder DVB-T PCI support | From | Mauro Carvalho Chehab <> | Date | Thu, 09 Mar 2006 07:06:13 -0300 |
| |
David,
It is better to address such questions to v4l ml or to dvb ml. Is it possible to make it work with your help.
Cheers, Mauro.
Em Sáb, 2006-03-04 às 09:31 +0100, David Kredba escreveu: > Hello. > > I got PCI card Genius VideoWonder DVB-T and I am trying to get it to work. > > The card is using SAA7134H, TDA 10046HT and TDA 8274 chips. > > My system is Gentoo (Base System version 1.6.14), kernel 2.6.15. > > The card is, by lspci, visible as : > > 02:03.0 Multimedia controller: Philips Semiconductors SAA7134 Video > Broadcast Decoder (rev 01) > Subsystem: KYE Systems Corporation Unknown device 0301 > Flags: bus master, medium devsel, latency 32, IRQ 19 > Memory at ffdffc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [40] Power Management version 1 > > If I tried to load saa7134-dvb module it loads and loads all of the > other needed modules, but it ignores the card and the module saa7134 > reports the card as V4L2 device and not the DVB. > > There is /usr/lib/hotplug/firmware dvb-fe-tda10046.fw firmware. > > The state before saa7134-dvb loaded : > > Module Size Used by > w83627hf 24080 0 > hwmon_vid 2432 1 w83627hf > i2c_isa 3840 1 w83627hf > snd_seq_midi 7072 0 > snd_emu10k1_synth 7040 0 > snd_emux_synth 35456 1 snd_emu10k1_synth > snd_seq_virmidi 6272 1 snd_emux_synth > snd_seq_midi_emul 7040 1 snd_emux_synth > snd_pcm_oss 48800 0 > snd_mixer_oss 17280 1 snd_pcm_oss > snd_seq_oss 33152 0 > snd_seq_midi_event 6144 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss > snd_seq 50448 8 > snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event > hci_usb 14100 5 > emu10k1_gp 3072 0 > snd_emu10k1 116388 2 snd_emu10k1_synth > snd_rawmidi 20896 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1 > snd_seq_device 7308 7 > snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi > snd_ac97_codec 91040 1 snd_emu10k1 > snd_pcm 80772 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec > snd_timer 21636 3 snd_seq,snd_emu10k1,snd_pcm > snd_ac97_bus 2176 1 snd_ac97_codec > snd_page_alloc 8584 2 snd_emu10k1,snd_pcm > snd_util_mem 3584 2 snd_emux_synth,snd_emu10k1 > snd_hwdep 7456 2 snd_emux_synth,snd_emu10k1 > snd 48356 15 > snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep > soundcore 8032 1 snd > video_buf 17284 0 > ir_kbd_i2c 6924 0 > ir_common 8324 1 ir_kbd_i2c > videodev 7680 0 > i2c_i801 8076 0 > i2c_core 17536 4 w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801 > intel_agp 20380 1 > agpgart 28880 1 intel_agp > r8169 23816 0 > > > The state after the saa7134-dvb loaded : > > saa7134_dvb 10500 0 > mt352 6276 1 saa7134_dvb > saa7134 108896 1 saa7134_dvb > v4l2_common 4992 1 saa7134 > v4l1_compat 13700 1 saa7134 > video_buf_dvb 4868 1 saa7134_dvb > dvb_core 76584 1 video_buf_dvb > nxt200x 14724 1 saa7134_dvb > dvb_pll 9092 2 saa7134_dvb,nxt200x > tda1004x 15108 1 saa7134_dvb > firmware_class 8320 3 saa7134_dvb,nxt200x,tda1004x > w83627hf 24080 0 > hwmon_vid 2432 1 w83627hf > i2c_isa 3840 1 w83627hf > snd_seq_midi 7072 0 > snd_emu10k1_synth 7040 0 > snd_emux_synth 35456 1 snd_emu10k1_synth > snd_seq_virmidi 6272 1 snd_emux_synth > snd_seq_midi_emul 7040 1 snd_emux_synth > snd_pcm_oss 48800 0 > snd_mixer_oss 17280 1 snd_pcm_oss > snd_seq_oss 33152 0 > snd_seq_midi_event 6144 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss > snd_seq 50448 8 > snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event > hci_usb 14100 5 > emu10k1_gp 3072 0 > snd_emu10k1 116388 2 snd_emu10k1_synth > snd_rawmidi 20896 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1 > snd_seq_device 7308 7 > snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi > snd_ac97_codec 91040 1 snd_emu10k1 > snd_pcm 80772 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec > snd_timer 21636 3 snd_seq,snd_emu10k1,snd_pcm > snd_ac97_bus 2176 1 snd_ac97_codec > snd_page_alloc 8584 2 snd_emu10k1,snd_pcm > snd_util_mem 3584 2 snd_emux_synth,snd_emu10k1 > snd_hwdep 7456 2 snd_emux_synth,snd_emu10k1 > snd 48356 15 > snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep > soundcore 8032 1 snd > video_buf 17284 3 saa7134_dvb,saa7134,video_buf_dvb > ir_kbd_i2c 6924 1 saa7134 > ir_common 8324 2 saa7134,ir_kbd_i2c > videodev 7680 1 saa7134 > i2c_i801 8076 0 > i2c_core 17536 9 > saa7134_dvb,mt352,saa7134,nxt200x,tda1004x,w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801 > intel_agp 20380 1 > agpgart 28880 1 intel_agp > r8169 23816 0 > > There is this and only this message, coming from saa7134, in teh > /var/log/messages file : > > saa7130/34: v4l2 driver version 0.2.14 loaded > ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19 > saa7134[0]: found at 0000:02:03.0, rev: 1, irq: 19, latency: 32, mmio: > 0xffdffc00 > saa7134[0]: subsystem: 1489:0301, board: UNKNOWN/GENERIC > [card=0,autodetected] > saa7134[0]: board init: gpio is 10000 > saa7134[0]: i2c eeprom 00: 89 14 01 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 ec ff ff ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff 10 ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: registered device video0 [v4l2] > saa7134[0]: registered device vbi0 > > There is no support for that card at linuxtv.org site. > > Is there possibility to get the card working? > > Thank you very much, David Kredba > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ Cheers, Mauro.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |