lkml.org 
[lkml]   [2006]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: 2.6.16-rc5: unreasonable temperature reported by w83627thf-isa-0290
From

Hallo Harald,

On 2006-03-07, Harald Dunkel wrote:
> Configuring a barebone (Aopen MZ915-M) I tried the sensors stuff
> today. After running sensors-detect this is what sensors reports:
>
> w83627thf-isa-0290
> Adapter: ISA adapter
> VCore: +1.36 V (min = +1.94 V, max = +1.94 V) ALARM
> +12V: +12.28 V (min = +10.82 V, max = +13.19 V)
> +3.3V: +3.18 V (min = +3.14 V, max = +3.47 V)
> +5V: +4.93 V (min = +4.75 V, max = +5.25 V)
> -12V: -12.11 V (min = -13.18 V, max = -10.80 V)
> V5SB: +5.05 V (min = +4.76 V, max = +5.24 V)
> VBat: +3.10 V (min = +2.40 V, max = +3.60 V)
> fan1: 0 RPM (min = 664 RPM, div = 8) ALARM
> CPU Fan: 0 RPM (min = 664 RPM, div = 8) ALARM
> fan3: 0 RPM (min = 664 RPM, div = 8) ALARM
> M/B Temp: +7 C (high = +45 C, hyst = +101 C) sensor = diode
> CPU Temp: -5.5 C (high = +80 C, hyst = +75 C) sensor = diode
> temp3: +7.5 C (high = +80 C, hyst = +75 C) sensor = diode
> alarms:
> beep_enable:
> Sound alarm enabled
>
> The voltage values seem to be the same as the bios displays.
> The min/max values of VCore doesn't seem right to me.

You can just change these values to something more suitable. Edit
/etc/sensors.conf, seek to the w83627thf-* section, edit the "set
in0_min" and "set in0_max" lines.

> M/B and CPU temperatures are unreasonable. Not to mention
> the CPU fan. It is set to full speed in the bios.

Does the BIOS report any speed for that fan? If so, what is the value?

The temperature values are admittedly strange. What temperature values
does the BIOS report, if any?

> Any ideas? Any help would be highly appreciated.

Either your W83627THF chip needs some additional configuration (such as a
different thermal sensor type selection), or you have another chip on
the board handling fans and tempeartures.

Please provide the full output of sensors-detect. Also, let us know which
version of lm_sensors you are using (sensors -v).

Note that you may want to follow-up on this on the lm-sensors list [1]
rather than the LKML, which isn't really the place for user-space
configuration issues.

[1] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
--
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-03-08 10:44    [W:0.036 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site