Messages in this thread | | | Date | Sun, 5 Mar 2006 07:41:29 -0500 (EST) | From | Justin Piszcz <> | Subject | Re: LibPATA code issues / 2.6.15.4 |
| |
On Sun, 5 Mar 2006, Justin Piszcz wrote:
> On Wed, 1 Mar 2006, David Greaves wrote: > >> David Greaves wrote: >> >>> Mark Lord wrote: >>> >>> >>> >>>> By the way, the latest 2.6.16-rc5-git4 is available, >>>> and has FUA turned off by default now. So it should >>>> work with your drives, and *you* are expected to verify >>>> that for us all now. >>>> >>>> >>> Yeah, I know - I've got it on the machine... but it's my wife's machine. >>> I've asked nicely but she's editing a Hercule Poirot video so I'm not >>> allowed to reboot it for a while... >>> >>> I've told her I'm not making pancakes until I've tested it so expect a >>> report Real Soon Now... >>> >>> >> OK that worked (the pancakes - the kernel's not doing so well...) >> >> haze:~# uname -a >> Linux haze 2.6.16-rc5-git4 #2 PREEMPT Wed Mar 1 19:07:58 UTC 2006 i686 >> GNU/Linux >> >> The boot is pretty clean. >> I ran an xfs_repair -n on the lvm volume and got the following errors. >> The repair reported a clean filesystem and the drive was not booted from >> the raid so that's a big improvement. >> >> I was not able to trigger similar messages on ata1 but a simple dd >> doesn't trigger the messages on ata2 either (and for various reasons, >> xfs_repair wouldn't run on ata1 - I thought I'd leave it and report this >> first) >> >> ata2: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: error=0x04 { DriveStatusError } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> ata2: no sense translation for status: 0x51 >> ata2: translated ATA stat/err 0x51/00 to SCSI SK/ASC/ASCQ 0x3/11/04 >> ata2: status=0x51 { DriveReady SeekComplete Error } >> >> David >> >> -- >> > > Using 2.6.16-rc5-git4 and removing a directory of around 5.0GB of files while > streaming a 1MB/s video stream on another (SATA disk), the I/O seemed to > freeze up for a moment and I got this error: > > [4342671.839000] ata1: command 0x35 timeout, stat 0x50 host_stat 0x22 > > Only 1 in dmesg, any idea what causes this error? > >
The drive it occured on was a 74GB raptor on an ICH5 controller.
[4294673.245000] Vendor: ATA Model: WDC WD740GD-00FL Rev: 33.0 0000:00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |