Messages in this thread Patch in this message | | | Date | Sun, 5 Mar 2006 01:05:06 +0300 | From | Alexey Dobriyan <> | Subject | [PATCH] Typos grab bag of the month |
| |
Eyeballed by jmc@ in OpenBSD.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> ---
Looks like typo in av7110.c is user-visible.
Documentation/m68k/README.buddha | 2 +- Documentation/networking/ifenslave.c | 2 +- arch/arm/lib/copy_template.S | 2 +- drivers/char/mxser.h | 2 +- drivers/char/synclink.c | 2 +- drivers/edac/edac_mc.c | 2 +- drivers/ide/ide.c | 2 +- drivers/media/dvb/dvb-core/demux.h | 2 +- drivers/media/dvb/dvb-usb/dvb-usb-init.c | 2 +- drivers/media/dvb/dvb-usb/dvb-usb.h | 2 +- drivers/media/dvb/ttpci/av7110.c | 2 +- drivers/media/video/cpia.c | 2 +- drivers/media/video/videocodec.h | 2 +- drivers/media/video/zr36050.c | 2 +- drivers/media/video/zr36060.c | 2 +- drivers/media/video/zr36120_i2c.c | 2 +- drivers/net/irda/nsc-ircc.c | 2 +- drivers/net/sis900.c | 2 +- drivers/net/tulip/de4x5.c | 2 +- drivers/net/tulip/pnic2.c | 2 +- drivers/net/typhoon.c | 4 ++-- drivers/net/wireless/orinoco.c | 2 +- drivers/net/wireless/prism54/isl_ioctl.c | 2 +- drivers/scsi/3w-9xxx.c | 2 +- drivers/serial/8250.c | 2 +- drivers/serial/au1x00_uart.c | 2 +- drivers/serial/serial_txx9.c | 2 +- drivers/serial/sunsu.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 2 +- drivers/usb/net/zaurus.c | 2 +- fs/mbcache.c | 2 +- include/asm-parisc/pdc.h | 2 +- include/asm-sh/addrspace.h | 2 +- include/asm-sparc64/floppy.h | 2 +- include/linux/fb.h | 2 +- mm/mempolicy.c | 2 +- net/irda/af_irda.c | 6 +++--- sound/pci/rme32.c | 8 ++++---- sound/pci/rme96.c | 8 ++++---- sound/pci/rme9652/hdspm.c | 2 +- sound/usb/usx2y/usx2yhwdeppcm.c | 2 +- 41 files changed, 50 insertions(+), 50 deletions(-)
--- a/arch/arm/lib/copy_template.S +++ b/arch/arm/lib/copy_template.S @@ -236,7 +236,7 @@ /* - * Abort preanble and completion macros. + * Abort preamble and completion macros. * If a fixup handler is required then those macros must surround it. * It is assumed that the fixup code will handle the private part of * the exit macro. --- a/Documentation/m68k/README.buddha +++ b/Documentation/m68k/README.buddha @@ -29,7 +29,7 @@ address is written to $4a, then the whol $48, while it doesn't matter how often you're writing to $4a as long as $48 is not touched. After $48 has been written, the whole card disappears from $e8 and is mapped to the new -address just written. Make shure $4a is written before $48, +address just written. Make sure $4a is written before $48, otherwise your chance is only 1:16 to find the board :-). The local memory-map is even active when mapped to $e8: --- a/Documentation/networking/ifenslave.c +++ b/Documentation/networking/ifenslave.c @@ -87,7 +87,7 @@ * would fail and generate an error message in the system log. * - For opt_c: slave should not be set to the master's setting * while it is running. It was already set during enslave. To - * simplify things, it is now handeled separately. + * simplify things, it is now handled separately. * * - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com> * - Code cleanup and style changes --- a/drivers/char/mxser.h +++ b/drivers/char/mxser.h @@ -118,7 +118,7 @@ // enable CTS interrupt #define MOXA_MUST_IER_ECTSI 0x80 -// eanble RTS interrupt +// enable RTS interrupt #define MOXA_MUST_IER_ERTSI 0x40 // enable Xon/Xoff interrupt #define MOXA_MUST_IER_XINT 0x20 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -6025,7 +6025,7 @@ static void usc_set_async_mode( struct m * <15..8> ? RxFIFO IRQ Request Level * * Note: For async mode the receive FIFO level must be set - * to 0 to aviod the situation where the FIFO contains fewer bytes + * to 0 to avoid the situation where the FIFO contains fewer bytes * than the trigger level and no more data is expected. * * <7> 0 Exited Hunt IA (Interrupt Arm) --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -2117,7 +2117,7 @@ static int __init edac_mc_init(void) /* perform check for first time to harvest boot leftovers */ do_edac_check(); - /* Create the MC sysfs entires */ + /* Create the MC sysfs entries */ if (edac_sysfs_memctrl_setup()) { printk(KERN_ERR "EDAC MC: Error initializing sysfs code\n"); return -ENODEV; --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -452,7 +452,7 @@ void ide_hwif_release_regions(ide_hwif_t * @hwif: hwif to update * @tmp_hwif: template * - * Restore hwif to a previous state by copying most settngs + * Restore hwif to a previous state by copying most settings * from the template. */ --- a/drivers/media/dvb/dvb-core/demux.h +++ b/drivers/media/dvb/dvb-core/demux.h @@ -216,7 +216,7 @@ struct dmx_frontend { /*--------------------------------------------------------------------------*/ /* - * Flags OR'ed in the capabilites field of struct dmx_demux. + * Flags OR'ed in the capabilities field of struct dmx_demux. */ #define DMX_TS_FILTERING 1 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -87,7 +87,7 @@ struct dvb_usb_device; /** * struct dvb_usb_properties - properties of a dvb-usb-device - * @caps: capabilites of the DVB USB device. + * @caps: capabilities of the DVB USB device. * @pid_filter_count: number of PID filter position in the optional hardware * PID-filter. * --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_d d->state = DVB_USB_STATE_INIT; -/* check the capabilites and set appropriate variables */ +/* check the capabilities and set appropriate variables */ /* speed - when running at FULL speed we need a HW PID filter */ if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) { --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110* len = ntohl(*(u32*) ptr); ptr += 4; if (len >= 512) { - printk("dvb-ttpci: dpram file is way to big.\n"); + printk("dvb-ttpci: dpram file is way too big.\n"); return -EINVAL; } if (crc != crc32_le(0, ptr, len)) { --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *i //DBG("cpia_ioctl: %u\n", ioctlnr); switch (ioctlnr) { - /* query capabilites */ + /* query capabilities */ case VIDIOCGCAP: { struct video_capability *b = arg; --- a/drivers/media/video/videocodec.h +++ b/drivers/media/video/videocodec.h @@ -56,7 +56,7 @@ the slave is bound to it). Otherwise it doesn't need this functions and therfor they may not be initialized. - The other fuctions are just for convenience, as they are for shure used by + The other fuctions are just for convenience, as they are for sure used by most/all of the codecs. The last ones may be ommited, too. See the structure declaration below for more information and which data has --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr) while (!(zr36050_read_status1(ptr) & 0x4)) { udelay(1); - if (i++ > 200000) { // 200ms, there is for shure something wrong!!! + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, "%s: timout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status1); --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr) while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { udelay(1); - if (i++ > 200000) { // 200ms, there is for shure something wrong!!! + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, "%s: timout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status); --- a/drivers/media/video/zr36120_i2c.c +++ b/drivers/media/video/zr36120_i2c.c @@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus, case I2C_DRIVERID_VIDEODECODER: DEBUG(printk(CARD_INFO "decoder attached\n",CARD)); - /* fetch the capabilites of the decoder */ + /* fetch the capabilities of the decoder */ rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc); if (rv) { DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD)); --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -705,7 +705,7 @@ static int nsc_ircc_init_39x(nsc_chip_t int cfg_base = info->cfg_base; int enabled; - /* User is shure about his config... accept it. */ + /* User is sure about his config... accept it. */ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " "io=0x%04x, irq=%d, dma=%d\n", __FUNCTION__, info->fir_base, info->irq, info->dma); --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -2282,7 +2282,7 @@ static void set_rx_mode(struct net_devic int i, table_entries; u32 rx_mode; - /* 635 Hash Table entires = 256(2^16) */ + /* 635 Hash Table entries = 256(2^16) */ if((sis_priv->chipset_rev >= SIS635A_900_REV) || (sis_priv->chipset_rev == SIS900B_900_REV)) table_entries = 16; --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -513,7 +513,7 @@ struct mii_phy { u_char *rst; /* Start of reset sequence in SROM */ u_int mc; /* Media Capabilities */ u_int ana; /* NWay Advertisement */ - u_int fdx; /* Full DupleX capabilites for each media */ + u_int fdx; /* Full DupleX capabilities for each media */ u_int ttm; /* Transmit Threshold Mode for each media */ u_int mci; /* 21142 MII Connector Interrupt info */ }; --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device /* negotiation ended successfully */ /* get the link partners reply and mask out all but - * bits 24-21 which show the partners capabilites + * bits 24-21 which show the partners capabilities * and match those to what we advertised * * then begin to interpret the results of the negotiation. --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -208,7 +208,7 @@ static struct typhoon_card_info typhoon_ }; /* Notes on the new subsystem numbering scheme: - * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES + * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES * bit 4 indicates if this card has secured firmware (we don't support it) * bit 8 indicates if this is a (0) copper or (1) fiber card * bits 12-16 indicate card type: (0) client and (1) server @@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, st /* we have two rings to choose from, but we only use txLo for now * If we start using the Hi ring as well, we'll need to update * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(), - * and TXHI_ENTIRES to match, as well as update the TSO code below + * and TXHI_ENTRIES to match, as well as update the TSO code below * to get the right DMA address */ txRing = &tp->txLoRing; --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct unsigned long flags; /* Note : you may have realised that, as this is a SET operation, - * this is priviledged and therefore a normal user can't + * this is privileged and therefore a normal user can't * perform scanning. * This is not an error, while the device perform scanning, * traffic doesn't flow, so it's a perfect DoS... --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *nde if (essid->length) { dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */ - /* if it is to big, trunk it */ + /* if it is too big, trunk it */ dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length); } else { dwrq->flags = 0; --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1030,7 +1030,7 @@ static void twa_free_request_id(TW_Devic tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH; } /* End twa_free_request_id() */ -/* This function will get parameter table entires from the firmware */ +/* This function will get parameter table entries from the firmware */ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes) { TW_Command_Full *full_command_packet; --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uar /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ serial8250_clear_fifos(up); --- a/drivers/serial/au1x00_uart.c +++ b/drivers/serial/au1x00_uart.c @@ -603,7 +603,7 @@ static int serial8250_startup(struct uar /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -481,7 +481,7 @@ static int serial_txx9_startup(struct ua /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ sio_set(up, TXX9_SIFCR, TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -644,7 +644,7 @@ static int sunsu_startup(struct uart_por /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control ( "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); - /* if we are only an humble host without any special capabilites + /* if we are only an humble host without any special capabilities * process the request straight away and exit */ if (info == NULL) { --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet * with devices that use it and those that don't. */ if ((detail->bDetailData[1] & ~0x02) != 0x01) { - /* bmDataCapabilites == 0 would be fine too, + /* bmDataCapabilities == 0 would be fine too, * but framing is minidriver-coupled for now. */ bad_detail: --- a/fs/mbcache.c +++ b/fs/mbcache.c @@ -311,7 +311,7 @@ fail: /* * mb_cache_shrink() * - * Removes all cache entires of a device from the cache. All cache entries + * Removes all cache entries of a device from the cache. All cache entries * currently in use cannot be freed, and thus remain in the cache. All others * are freed. * --- a/include/asm-parisc/pdc.h +++ b/include/asm-parisc/pdc.h @@ -333,7 +333,7 @@ struct pdc_model { /* for PDC_MODEL */ unsigned long curr_key; }; -/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */ +/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ #define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */ #define PDC_MODEL_NVA_MASK (3 << 4) --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -13,7 +13,7 @@ #include <asm/cpu/addrspace.h> -/* Memory segments (32bit Priviledged mode addresses) */ +/* Memory segments (32bit Privileged mode addresses) */ #define P0SEG 0x00000000 #define P1SEG 0x80000000 #define P2SEG 0xa0000000 --- a/include/asm-sparc64/floppy.h +++ b/include/asm-sparc64/floppy.h @@ -738,7 +738,7 @@ static unsigned long __init sun_floppy_i if (!sun_floppy_types[0] && sun_floppy_types[1]) { /* * Set the drive exchange bit in FCR on NS87303, - * make shure other bits are sane before doing so. + * make sure other bits are sane before doing so. */ ns87303_modify(config, FER, FER_EDM, 0); ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -734,7 +734,7 @@ struct fb_tile_ops { /* A driver may set this flag to indicate that it does want a set_par to be * called every time when fbcon_switch is executed. The advantage is that with - * this flag set you can really be shure that set_par is always called before + * this flag set you can really be sure that set_par is always called before * any of the functions dependant on the correct hardware state or altering * that state, even if you are using some broken X releases. The disadvantage * is that it introduces unwanted delays to every console switch if set_par --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -937,7 +937,7 @@ asmlinkage long sys_migrate_pages(pid_t /* * Check if this process has the right to modify the specified * process. The right exists if the process has administrative - * capabilities, superuser priviledges or the same + * capabilities, superuser privileges or the same * userid as the target process. */ if ((current->euid != task->suid) && (current->euid != task->uid) && --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1302,7 +1302,7 @@ static int irda_sendmsg(struct kiocb *io if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; - /* Check that we don't send out to big frames */ + /* Check that we don't send out too big frames */ if (len > self->max_data_size) { IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n", __FUNCTION__, len, self->max_data_size); @@ -1546,7 +1546,7 @@ static int irda_sendmsg_dgram(struct kio IRDA_ASSERT(self != NULL, return -1;); /* - * Check that we don't send out to big frames. This is an unreliable + * Check that we don't send out too big frames. This is an unreliable * service, so we have no fragmentation and no coalescence */ if (len > self->max_data_size) { @@ -1642,7 +1642,7 @@ static int irda_sendmsg_ultra(struct kio } /* - * Check that we don't send out to big frames. This is an unreliable + * Check that we don't send out too big frames. This is an unreliable * service, so we have no fragmentation and no coalescence */ if (len > self->max_data_size) { --- a/sound/pci/rme32.c +++ b/sound/pci/rme32.c @@ -313,7 +313,7 @@ static int snd_rme32_capture_copy(struct } /* - * SPDIF I/O capabilites (half-duplex mode) + * SPDIF I/O capabilities (half-duplex mode) */ static struct snd_pcm_hardware snd_rme32_spdif_info = { .info = (SNDRV_PCM_INFO_MMAP_IOMEM | @@ -339,7 +339,7 @@ static struct snd_pcm_hardware snd_rme32 }; /* - * ADAT I/O capabilites (half-duplex mode) + * ADAT I/O capabilities (half-duplex mode) */ static struct snd_pcm_hardware snd_rme32_adat_info = { @@ -364,7 +364,7 @@ static struct snd_pcm_hardware snd_rme32 }; /* - * SPDIF I/O capabilites (full-duplex mode) + * SPDIF I/O capabilities (full-duplex mode) */ static struct snd_pcm_hardware snd_rme32_spdif_fd_info = { .info = (SNDRV_PCM_INFO_MMAP | @@ -390,7 +390,7 @@ static struct snd_pcm_hardware snd_rme32 }; /* - * ADAT I/O capabilites (full-duplex mode) + * ADAT I/O capabilities (full-duplex mode) */ static struct snd_pcm_hardware snd_rme32_adat_fd_info = { --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2256,7 +2256,7 @@ static int snd_hdspm_create_controls(str } /* Channel playback mixer as default control - Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats to big for any alsamixer + Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats too big for any alsamixer they are accesible via special IOCTL on hwdep and the mixer 2dimensional mixer control */ --- a/sound/pci/rme96.c +++ b/sound/pci/rme96.c @@ -359,7 +359,7 @@ snd_rme96_capture_copy(struct snd_pcm_su } /* - * Digital output capabilites (S/PDIF) + * Digital output capabilities (S/PDIF) */ static struct snd_pcm_hardware snd_rme96_playback_spdif_info = { @@ -388,7 +388,7 @@ static struct snd_pcm_hardware snd_rme96 }; /* - * Digital input capabilites (S/PDIF) + * Digital input capabilities (S/PDIF) */ static struct snd_pcm_hardware snd_rme96_capture_spdif_info = { @@ -417,7 +417,7 @@ static struct snd_pcm_hardware snd_rme96 }; /* - * Digital output capabilites (ADAT) + * Digital output capabilities (ADAT) */ static struct snd_pcm_hardware snd_rme96_playback_adat_info = { @@ -442,7 +442,7 @@ static struct snd_pcm_hardware snd_rme96 }; /* - * Digital input capabilites (ADAT) + * Digital input capabilities (ADAT) */ static struct snd_pcm_hardware snd_rme96_capture_adat_info = { --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -404,7 +404,7 @@ static void usX2Y_usbpcm_subs_startup(st struct usX2Ydev * usX2Y = subs->usX2Y; usX2Y->prepare_subs = subs; subs->urb[0]->start_frame = -1; - smp_wmb(); // Make shure above modifications are seen by i_usX2Y_subs_startup() + smp_wmb(); // Make sure above modifications are seen by i_usX2Y_subs_startup() usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup); } - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |