lkml.org 
[lkml]   [2006]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RESEND][2.6.15] New ATA error messages on upgrade to 2.6.15
Date
On Mar 31, 2006, at 20:21:15, Robert Hancock wrote:
> Kyle Moffett wrote:
>> hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
>> hdg: dma_intr: error=0x84 { DriveStatusError BadCRC }
>
> Hmm, are these new? Sure you don't have a bad IDE cable?

Oh, those aren't the errors I'm worried about; I've had those for a
while and they're harmless. Those are due to the kernel running the
IDE controller at a higher-than-supported speed. It gets errors for
a couple seconds and automatically drops the bus down to a lower and
safer speed. The cable's aren't bad, I've tried at least 6 different
80-conductor cables that all work fine in other systems. The errors
I _am_ worried about are these:

> Mar 28 03:15:13 penelope kernel: hdi: status timeout: status=0xd0
> { Busy }
> Mar 28 03:15:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:15:13 penelope kernel: hdi: no DRQ after issuing
> MULTWRITE_EXT
> Mar 28 03:15:13 penelope kernel: ide4: reset: success
> Mar 28 03:30:13 penelope kernel: hdi: status timeout: status=0xd0
> { Busy }
> Mar 28 03:30:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:30:13 penelope kernel: hdi: no DRQ after issuing
> MULTWRITE_EXT
> Mar 28 03:30:13 penelope kernel: ide4: reset: success

Cheers,
Kyle Moffett

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-04-01 04:57    [W:0.056 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site