lkml.org 
[lkml]   [2006]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[2.6.15] New ATA error messages on upgrade to 2.6.15
Date
I'm getting the following errors in my syslog on a fairly regular  
basis (1 or 2 per hour). They seem to have started when I upgraded
from Debian 2.6.12-1-powerpc (with internal IDE patch) to Debian
2.6.15-1-powerpc. My best guess is for some reason the kernel
started issuing the command MULTWRITE_EXT that it didn't before, and
one of my drives doesn't like it. Two of the drives are attached to
a Promise PDC20268 (Rebranded a couple times by different
manufacturers and with mac-bootable firmware), the third is attached
to the internal ATA66 bus in the 400MHz powermac G4. My apologies if
this problem is known and fixed in 2.6.16; if necessary I'll wait
until Debian testing gets a 2.6.16 kernel and test that too.

Thanks for the help!

Cheers,
Kyle Moffett

Begin forwarded message:
> Security Events
> =-=-=-=-=-=-=-=
> Mar 28 03:15:13 penelope kernel: ide: failed opcode was: unknown
> Mar 28 03:30:13 penelope kernel: ide: failed opcode was: unknown
>
> System Events
> =-=-=-=-=-=-=
> Mar 28 03:15:13 penelope kernel: hdi: status timeout: status=0xd0
> { Busy }
> Mar 28 03:15:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:15:13 penelope kernel: hdi: no DRQ after issuing
> MULTWRITE_EXT
> Mar 28 03:15:13 penelope kernel: ide4: reset: success
> Mar 28 03:30:13 penelope kernel: hdi: status timeout: status=0xd0
> { Busy }
> Mar 28 03:30:13 penelope kernel: PDC202XX: Secondary channel reset.
> Mar 28 03:30:13 penelope kernel: hdi: no DRQ after issuing
> MULTWRITE_EXT
> Mar 28 03:30:13 penelope kernel: ide4: reset: success

smartctl -a:
> smartctl version 5.34 [powerpc-unknown-linux-gnu] Copyright (C)
> 2002-5 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: SAMSUNG SP0822N
> Serial Number: S06QJ10Y946116
> Firmware Version: WA100-32
> User Capacity: 80,060,424,192 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 6
> ATA Standard is: ATA/ATAPI-6 T13 1410D revision 1
> Local Time is: Tue Mar 28 12:54:35 2006 EST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x84) Offline data collection
> activity
> was suspended by an
> interrupting command from host.
> Auto Offline Data
> Collection: Enabled.
> Self-test execution status: ( 0) The previous self-test
> routine completed
> without error or no self-
> test has ever
> been run.
> Total time to complete Offline
> data collection: (1980) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline
> immediate.
> Auto Offline data
> collection on/off support.
> Suspend Offline collection
> upon new
> command.
> Offline surface scan
> supported.
> Self-test supported.
> No Conveyance Self-test
> supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before
> entering
> power-saving mode.
> Supports SMART auto save
> timer.
> Error logging capability: (0x01) Error logging supported.
> No General Purpose Logging
> support.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 33) minutes.
>
> SMART Attributes Data Structure revision number: 17
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
> UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail
> Always - 0
> 3 Spin_Up_Time 0x0007 252 252 011 Pre-fail
> Always - 0
> 4 Start_Stop_Count 0x0032 252 252 000 Old_age
> Always - 0
> 5 Reallocated_Sector_Ct 0x0033 252 252 011 Pre-fail
> Always - 0
> 7 Seek_Error_Rate 0x000f 252 252 051 Pre-fail
> Always - 0
> 8 Seek_Time_Performance 0x0025 092 092 015 Pre-fail
> Offline - 3665
> 9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age
> Always - 32h+43m
> 10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail
> Always - 0
> 11 Calibration_Retry_Count 0x0012 252 252 000 Old_age
> Always - 0
> 12 Power_Cycle_Count 0x0032 252 252 000 Old_age
> Always - 0
> 190 Unknown_Attribute 0x0022 154 133 000 Old_age
> Always - 33
> 194 Temperature_Celsius 0x0022 151 133 000 Old_age
> Always - 34
> 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age
> Always - 0
> 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age
> Always - 0
> 197 Current_Pending_Sector 0x0012 252 252 000 Old_age
> Always - 0
> 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age
> Offline - 0
> 199 UDMA_CRC_Error_Count 0x003e 199 199 000 Old_age
> Always - 173
> 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age
> Always - 0
> 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age
> Always - 0
>
> Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
> SMART Error Log Version: 1
> No Errors Logged
>
> SMART Self-test log structure revision number 0
> Warning: ATA Specification requires self-test log structure
> revision number = 1
> Num Test_Description Status Remaining LifeTime
> (hours) LBA_of_first_error
> # 1 Short offline Completed without error 00%
> 3918 -
> # 2 Short offline Completed without error 00%
> 3894 -
> # 3 Extended offline Interrupted (host reset) 30%
> 3870 -
> # 4 Short offline Completed without error 00%
> 3846 -
> # 5 Short offline Completed without error 00%
> 3822 -
> # 6 Short offline Completed without error 00%
> 3798 -
> # 7 Short offline Completed without error 00%
> 3774 -
> # 8 Short offline Completed without error 00%
> 3750 -
> # 9 Short offline Completed without error 00%
> 3726 -
> #10 Extended offline Completed without error 00%
> 3703 -
> #11 Short offline Completed without error 00%
> 3678 -
> #12 Short offline Completed without error 00%
> 3654 -
> #13 Short offline Completed without error 00%
> 3630 -
> #14 Short offline Completed without error 00%
> 3606 -
> #15 Short offline Completed without error 00%
> 3582 -
> #16 Short offline Completed without error 00%
> 3558 -
> #17 Extended offline Completed without error 00%
> 3535 -
> #18 Short offline Completed without error 00%
> 3511 -
> #19 Short offline Completed without error 00%
> 3487 -
> #20 Short offline Completed without error 00%
> 3463 -
> #21 Short offline Completed without error 00%
> 3439 -
>
> SMART Selective Self-Test Log Data Structure Revision Number (0)
> should be 1
> SMART Selective self-test log data structure revision number 0
> Warning: ATA Specification requires selective self-test log data
> structure revision number = 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 281479271677952 0 Not_testing
> 4 0 281479271767952 Not_testing
> 5 604800 4 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0
> minute delay.



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-03-28 20:00    [W:0.085 / U:1.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site