lkml.org 
[lkml]   [2006]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 2.6.15-rt21, BUG at net/ipv4/netfilter/ip_conntrack_core.c:124
    From
    Date
    On Mon, 2006-03-27 at 01:19 +0200, Ingo Molnar wrote:
    > * Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> wrote:
    >
    > > On Sun, 2006-03-26 at 18:34 +0200, Ingo Molnar wrote:
    > > > * Ingo Molnar <mingo@elte.hu> wrote:
    > > >
    > > > > > Mar 23 15:22:48 host kernel: BUG at
    > > > > > net/ipv4/netfilter/ip_conntrack_core.c:124!
    > > > >
    > > > > does the patch below help?
    > > >
    > > > updated patch below.
    > >
    > > Thanks! I'll test later today. It may take a while to be reasonably
    > > sure whether it makes a difference. The hangs have not been frequent.
    > >
    > > If I try a 2.6.16 based kernel, should I also use this patch?
    >
    > not needed - it's included in -rt10. (-rt9 had it too but was buggy)

    Oh well, I just experienced another complete hang, no traces left
    behind, reset button was the only option :-( So most probably this
    problem is unrelated to your fix. I'm including a dmesg of the
    successful reboot just in case there is something there of use (I only
    had to apply one chunk of your fix to arp_tables.c, the other raw_* was
    already there, maybe included in 2.6.15.6?).

    Maybe I'll have to try 2.6.16...
    -- Fernando

    Linux version 2.6.15-1.1833.5.rrt.rhfc4.ccrmasmp (machbuild@planetforge.stanford.edu) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP PREEMPT Sun Mar 26 16:10:21 EST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1151MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f4ee0
    NX (Execute Disable) protection: active
    On node 0 totalpages: 524272
    DMA zone: 4096 pages, LIFO batch:0
    DMA32 zone: 0 pages, LIFO batch:0
    Normal zone: 225280 pages, LIFO batch:31
    HighMem zone: 294896 pages, LIFO batch:31
    DMI 2.3 present.
    Using APIC driver default
    ACPI: RSDP (v000 Nvidia ) @ 0x000f6a20
    ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3000
    ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3040
    ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff78c0
    ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC enabled (0).
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:3 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:3 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: BIOS IRQ0 pin2 override ignored.
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    LAPIC enabled (0), calling get_smp_config
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
    Detected 2210.745 MHz processor.
    Real-Time Preemption Support (C) 2004-2005 Ingo Molnar
    Built 1 zonelists
    Kernel command line: ro root=LABEL=/1 rhgb quiet
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Initializing CPU#0
    WARNING: experimental RCU implementation.
    CPU 0 irqstacks, hard=c0475000 soft=c0455000
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Event source pit installed with caps set: 01
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2057696k/2097088k available (2271k kernel code, 39004k reserved, 875k data, 232k init, 1179584k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4422.77 BogoMIPS (lpj=2211387)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 0(2) -> Core 0
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    mtrr: v2.0 (20020519)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c0476000 soft=c0456000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4420.89 BogoMIPS (lpj=2210446)
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 1(2) -> Core 1
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
    Total of 2 processors activated (8843.66 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    Event source lapic installed with caps set: 06
    checking TSC synchronization across 2 CPUs: failed.
    starting TSC synchronization
    TSC synchronization complete max_delta=0 cycles
    TSC sync round-trip time 0.225 microseconds
    Event source lapic installed with caps set: 06
    Brought up 2 CPUs
    checking if image is initramfs... it is
    Freeing initrd memory: 1175k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=2
    PCI: Using configuration type 1
    ACPI: Subsystem revision 20050902
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: Power Resource [ISAV] (on)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 11 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
    pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
    pnp: 00:00: ioport range 0x1400-0x147f has been reserved
    pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
    pnp: 00:00: ioport range 0x1800-0x187f has been reserved
    pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
    PCI: Bridge: 0000:00:0b.0
    IO window: 8000-8fff
    MEM window: f2000000-f3ffffff
    PREFETCH window: e0000000-efffffff
    PCI: Bridge: 0000:00:0e.0
    IO window: 9000-afff
    MEM window: f4000000-f5ffffff
    PREFETCH window: 88000000-880fffff
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    audit: initializing netlink socket (disabled)
    audit(1143390143.028:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key 3FD05D7BD6CB3BE4
    - key was been created 15969 seconds in future
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected AGP bridge 0
    agpgart: Setting up Nforce3 AGP.
    agpgart: AGP aperture is 32M @ 0xf0000000
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
    NFORCE3-250: chipset revision 162
    NFORCE3-250: not 100% native mode: will probe irqs later
    NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
    NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    Probing IDE interface ide0...
    hda: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    Probing IDE interface ide1...
    hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    ide-floppy driver 0.99.newide
    usbcore: registered new driver libusual
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
    TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
    TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
    TCP: Hash tables configured (established 65536 bind 65536)
    TCP reno registered
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    ACPI wakeup devices:
    HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
    ACPI: (supports S0 S1 S4 S5)
    Freeing unused kernel memory: 232k freed
    Write protecting the kernel read-only data: 354k
    Time: tsc clocksource has been installed.
    hrtimers: Switched to high resolution mode CPU 1
    hrtimers: Switched to high resolution mode CPU 0
    SCSI subsystem initialized
    libata version 1.20 loaded.
    sata_sil 0000:02:0d.0: version 0.9
    ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 177
    ata1: SATA max UDMA/100 cmd 0xF881C080 ctl 0xF881C08A bmdma 0xF881C000 irq 177
    ata2: SATA max UDMA/100 cmd 0xF881C0C0 ctl 0xF881C0CA bmdma 0xF881C008 irq 177
    Time: acpi_pm clocksource has been installed.
    hrtimers: Switched to high resolution mode CPU 1
    hrtimers: Switched to high resolution mode CPU 0
    ata1: SATA link down (SStatus 0)
    scsi0 : sata_sil
    ata2: SATA link down (SStatus 0)
    scsi1 : sata_sil
    sata_nv 0000:00:0a.0: version 0.8
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 185
    ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 185
    ata3: SATA link up 1.5 Gbps (SStatus 113)
    ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f
    ata3: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
    nv_sata: Primary device added
    ata3: dev 0 configured for UDMA/133
    scsi2 : sata_nv
    nv_sata: Primary device removed
    nv_sata: Secondary device removed
    ata4: SATA link down (SStatus 0)
    scsi3 : sata_nv
    Vendor: ATA Model: ST380817AS Rev: 3.42
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    SCSI device sda: drive cache: write back
    SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3 sda4 < sda5 >
    sd 2:0:0:0: Attached scsi disk sda
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    EXT3-fs: recovery complete.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    security: 3 users, 6 roles, 889 types, 109 bools
    security: 55 classes, 244452 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev sda1, type ext3), uses xattr
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193
    ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193
    eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
    PrefPort:A RlmtMode:Check Link State
    ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 201
    ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.10/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4952: Hammerfall-DSP: Firmware already present, initializing card.
    ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.10/acore/init.c:106: cannot find the slot for index 0 (range 0-0)
    Intel ICH: probe of 0000:00:06.0 failed with error -12
    i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 209
    PCI: Setting latency timer of device 0000:00:02.2 to 64
    ehci_hcd 0000:00:02.2: EHCI Host Controller
    ehci_hcd 0000:00:02.2: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.2
    ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.2: irq 209, io mem 0xf6005000
    ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 217
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 217, io mem 0xf6003000
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ohci_hcd 0000:00:02.1: OHCI Host Controller
    ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:02.1: irq 185, io mem 0xf6004000
    usb 2-3: new low speed USB device using ohci_hcd and address 2
    input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ieee1394: Initialized config rom entry `ip1394'
    ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 201
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[f5018000-f50187ff] Max Packet=[4096]
    usb 3-3: new low speed USB device using ohci_hcd and address 2
    input: Logitech Logitech USB Keyboard as /class/input/input1
    input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
    input: Logitech Logitech USB Keyboard as /class/input/input2
    input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3
    SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea560057330b]
    eth0: network connection up using port A
    speed: 1000
    autonegotiation: yes
    duplex mode: full
    flowctrl: symmetric
    role: slave
    irq moderation: disabled
    scatter-gather: enabled
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ibm_acpi: ec object not found
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    cdrom: open failed.
    cdrom: open failed.
    EXT3 FS on sda1, internal journal
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda5, type ext3), uses xattr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda2, type ext3), uses xattr
    Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
    Bluetooth: Core ver 2.8
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.6
    SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
    eth0: no IPv6 routers present
    ip_tables: (C) 2000-2002 Netfilter core team
    Netfilter messages via NETLINK v0.30.
    ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
    ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
    ipt_owner: pid, sid and command matching not supported anymore
    SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts
    SELinux: initialized (dev 0:19, type nfs), uses genfs_contexts
    [drm] Initialized drm 1.0.0 20040925
    ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 225
    [drm] Initialized radeon 1.19.0 20050911 on minor 0:
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
    [drm] Loading R200 Microcode
    SELinux: initialized (dev 0:1a, type nfs), uses genfs_contexts
    SELinux: initialized (dev 0:12, type nfs), uses genfs_contexts
    SELinux: initialized (dev 0:1b, type nfs), uses genfs_contexts
    WARNING: sbcl/5362 changed soft IRQ-flags.
    [<c01411c2>] local_irq_enable+0x16/0x29 (8)
    [<c0335a99>] do_int3+0x7f/0x81 (8)
    [<c03356a2>] int3+0x1e/0x24 (48)
    \
     
     \ /
      Last update: 2006-03-27 02:35    [W:0.059 / U:0.320 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site