lkml.org 
[lkml]   [2006]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Subject[PATCH 1 of 18] ipath - core driver header files
    Date
    From
    Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>

    diff -r e8d148a6ae05 -r c626556ff9d6 drivers/infiniband/hw/ipath/ipath_common.h
    --- /dev/null Thu Jan 1 00:00:00 1970 +0000
    +++ b/drivers/infiniband/hw/ipath/ipath_common.h Wed Mar 22 14:53:44 2006 -0800
    @@ -0,0 +1,616 @@
    +/*
    + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
    + *
    + * This software is available to you under a choice of one of two
    + * licenses. You may choose to be licensed under the terms of the GNU
    + * General Public License (GPL) Version 2, available from the file
    + * COPYING in the main directory of this source tree, or the
    + * OpenIB.org BSD license below:
    + *
    + * Redistribution and use in source and binary forms, with or
    + * without modification, are permitted provided that the following
    + * conditions are met:
    + *
    + * - Redistributions of source code must retain the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer.
    + *
    + * - Redistributions in binary form must reproduce the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer in the documentation and/or other materials
    + * provided with the distribution.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
    + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
    + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    + * SOFTWARE.
    + */
    +
    +#ifndef _IPATH_COMMON_H
    +#define _IPATH_COMMON_H
    +
    +/*
    + * This file contains defines, structures, etc. that are used
    + * to communicate between kernel and user code.
    + */
    +
    +/* This is the IEEE-assigned OUI for PathScale, Inc. */
    +#define IPATH_SRC_OUI_1 0x00
    +#define IPATH_SRC_OUI_2 0x11
    +#define IPATH_SRC_OUI_3 0x75
    +
    +/* version of protocol header (known to chip also). In the long run,
    + * we should be able to generate and accept a range of version numbers;
    + * for now we only accept one, and it's compiled in.
    + */
    +#define IPS_PROTO_VERSION 2
    +
    +/*
    + * These are compile time constants that you may want to enable or disable
    + * if you are trying to debug problems with code or performance.
    + * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
    + * fastpath code
    + * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
    + * traced in faspath code
    + * _IPATH_TRACING define as 0 if you want to remove all tracing in a
    + * compilation unit
    + * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
    + */
    +
    +/*
    + * The value in the BTH QP field that InfiniPath uses to differentiate
    + * an infinipath protocol IB packet vs standard IB transport
    + */
    +#define IPATH_KD_QP 0x656b79
    +
    +/*
    + * valid states passed to ipath_set_linkstate() user call
    + */
    +#define IPATH_IB_LINKDOWN 0
    +#define IPATH_IB_LINKARM 1
    +#define IPATH_IB_LINKACTIVE 2
    +#define IPATH_IB_LINKINIT 3
    +#define IPATH_IB_LINKDOWN_SLEEP 4
    +#define IPATH_IB_LINKDOWN_DISABLE 5
    +
    +/*
    + * stats maintained by the driver. For now, at least, this is global
    + * to all minor devices.
    + */
    +struct infinipath_stats {
    + /* number of interrupts taken */
    + __u64 sps_ints;
    + /* number of interrupts for errors */
    + __u64 sps_errints;
    + /* number of errors from chip (not incl. packet errors or CRC) */
    + __u64 sps_errs;
    + /* number of packet errors from chip other than CRC */
    + __u64 sps_pkterrs;
    + /* number of packets with CRC errors (ICRC and VCRC) */
    + __u64 sps_crcerrs;
    + /* number of hardware errors reported (parity, etc.) */
    + __u64 sps_hwerrs;
    + /* number of times IB link changed state unexpectedly */
    + __u64 sps_iblink;
    + /* no longer used; left for compatibility */
    + __u64 sps_unused3;
    + /* number of kernel (port0) packets received */
    + __u64 sps_port0pkts;
    + /* number of "ethernet" packets sent by driver */
    + __u64 sps_ether_spkts;
    + /* number of "ethernet" packets received by driver */
    + __u64 sps_ether_rpkts;
    + /* number of SMA packets sent by driver */
    + __u64 sps_sma_spkts;
    + /* number of SMA packets received by driver */
    + __u64 sps_sma_rpkts;
    + /* number of times all ports rcvhdrq was full and packet dropped */
    + __u64 sps_hdrqfull;
    + /* number of times all ports egrtid was full and packet dropped */
    + __u64 sps_etidfull;
    + /*
    + * number of times we tried to send from driver, but no pio buffers
    + * avail
    + */
    + __u64 sps_nopiobufs;
    + /* number of ports currently open */
    + __u64 sps_ports;
    + /* list of pkeys (other than default) accepted (0 means not set) */
    + __u16 sps_pkeys[4];
    + /* lids for up to 4 infinipaths, indexed by infinipath # */
    + __u16 sps_lid[4];
    + /* number of user ports per chip (not IB ports) */
    + __u32 sps_nports;
    + /* not our interrupt, or already handled */
    + __u32 sps_nullintr;
    + /* max number of packets handled per receive call */
    + __u32 sps_maxpkts_call;
    + /* avg number of packets handled per receive call */
    + __u32 sps_avgpkts_call;
    + /* total number of pages locked */
    + __u64 sps_pagelocks;
    + /* total number of pages unlocked */
    + __u64 sps_pageunlocks;
    + /*
    + * Number of packets dropped in kernel other than errors (ether
    + * packets if ipath not configured, sma/mad, etc.)
    + */
    + __u64 sps_krdrops;
    + /* mlids for up to 4 infinipaths, indexed by infinipath # */
    + __u16 sps_mlid[4];
    + /* pad for future growth */
    + __u64 __sps_pad[45];
    +};
    +
    +/*
    + * These are the status bits readable (in ascii form, 64bit value)
    + * from the "status" sysfs file.
    + */
    +#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
    +#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
    +/* Device has been disabled via admin request */
    +#define IPATH_STATUS_ADMIN_DISABLED 0x4
    +#define IPATH_STATUS_OIB_SMA 0x8 /* ipath_mad kernel SMA running */
    +#define IPATH_STATUS_SMA 0x10 /* user SMA running */
    +/* Chip has been found and initted */
    +#define IPATH_STATUS_CHIP_PRESENT 0x20
    +/* IB link is at ACTIVE, usable for data traffic */
    +#define IPATH_STATUS_IB_READY 0x40
    +/* link is configured, LID, MTU, etc. have been set */
    +#define IPATH_STATUS_IB_CONF 0x80
    +/* no link established, probably no cable */
    +#define IPATH_STATUS_IB_NOCABLE 0x100
    +/* A Fatal hardware error has occurred. */
    +#define IPATH_STATUS_HWERROR 0x200
    +
    +/*
    + * The list of usermode accessible registers. Also see Reg_* later in file.
    + */
    +typedef enum _ipath_ureg {
    + /* (RO) DMA RcvHdr to be used next. */
    + ur_rcvhdrtail = 0,
    + /* (RW) RcvHdr entry to be processed next by host. */
    + ur_rcvhdrhead = 1,
    + /* (RO) Index of next Eager index to use. */
    + ur_rcvegrindextail = 2,
    + /* (RW) Eager TID to be processed next */
    + ur_rcvegrindexhead = 3,
    + /* For internal use only; max register number. */
    + _IPATH_UregMax
    +} ipath_ureg;
    +
    +/* bit values for spi_runtime_flags */
    +#define IPATH_RUNTIME_HT 0x1
    +#define IPATH_RUNTIME_PCIE 0x2
    +#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
    +#define IPATH_RUNTIME_RCVHDR_COPY 0x8
    +
    +/*
    + * This structure is returned by ipath_userinit() immediately after
    + * open to get implementation-specific info, and info specific to this
    + * instance.
    + *
    + * This struct must have explict pad fields where type sizes
    + * may result in different alignments between 32 and 64 bit
    + * programs, since the 64 bit * bit kernel requires the user code
    + * to have matching offsets
    + */
    +struct ipath_base_info {
    + /* version of hardware, for feature checking. */
    + __u32 spi_hw_version;
    + /* version of software, for feature checking. */
    + __u32 spi_sw_version;
    + /* InfiniPath port assigned, goes into sent packets */
    + __u32 spi_port;
    + /*
    + * IB MTU, packets IB data must be less than this.
    + * The MTU is in bytes, and will be a multiple of 4 bytes.
    + */
    + __u32 spi_mtu;
    + /*
    + * Size of a PIO buffer. Any given packet's total size must be less
    + * than this (in words). Included is the starting control word, so
    + * if 513 is returned, then total pkt size is 512 words or less.
    + */
    + __u32 spi_piosize;
    + /* size of the TID cache in infinipath, in entries */
    + __u32 spi_tidcnt;
    + /* size of the TID Eager list in infinipath, in entries */
    + __u32 spi_tidegrcnt;
    + /* size of a single receive header queue entry. */
    + __u32 spi_rcvhdrent_size;
    + /*
    + * Count of receive header queue entries allocated.
    + * This may be less than the spu_rcvhdrcnt passed in!.
    + */
    + __u32 spi_rcvhdr_cnt;
    +
    + /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
    + __u32 spi_runtime_flags;
    +
    + /* address where receive buffer queue is mapped into */
    + __u64 spi_rcvhdr_base;
    +
    + /* user program. */
    +
    + /* base address of eager TID receive buffers. */
    + __u64 spi_rcv_egrbufs;
    +
    + /* Allocated by initialization code, not by protocol. */
    +
    + /*
    + * Size of each TID buffer in host memory, starting at
    + * spi_rcv_egrbufs. The buffers are virtually contiguous.
    + */
    + __u32 spi_rcv_egrbufsize;
    + /*
    + * The special QP (queue pair) value that identifies an infinipath
    + * protocol packet from standard IB packets. More, probably much
    + * more, to be added.
    + */
    + __u32 spi_qpair;
    +
    + /*
    + * User register base for init code, not to be used directly by
    + * protocol or applications.
    + */
    + __u64 __spi_uregbase;
    + /*
    + * Maximum buffer size in bytes that can be used in a single TID
    + * entry (assuming the buffer is aligned to this boundary). This is
    + * the minimum of what the hardware and software support Guaranteed
    + * to be a power of 2.
    + */
    + __u32 spi_tid_maxsize;
    + /*
    + * alignment of each pio send buffer (byte count
    + * to add to spi_piobufbase to get to second buffer)
    + */
    + __u32 spi_pioalign;
    + /*
    + * The index of the first pio buffer available to this process;
    + * needed to do lookup in spi_pioavailaddr; not added to
    + * spi_piobufbase.
    + */
    + __u32 spi_pioindex;
    + /* number of buffers mapped for this process */
    + __u32 spi_piocnt;
    +
    + /*
    + * Base address of writeonly pio buffers for this process.
    + * Each buffer has spi_piosize words, and is aligned on spi_pioalign
    + * boundaries. spi_piocnt buffers are mapped from this address
    + */
    + __u64 spi_piobufbase;
    +
    + /*
    + * Base address of readonly memory copy of the pioavail registers.
    + * There are 2 bits for each buffer.
    + */
    + __u64 spi_pioavailaddr;
    +
    + /*
    + * Address where driver updates a copy of the interface and driver
    + * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
    + * string indicating hardware error, if there was one.
    + */
    + __u64 spi_status;
    +
    + /* number of chip ports available to user processes */
    + __u32 spi_nports;
    + /* unit number of chip we are using */
    + __u32 spi_unit;
    + /* num bufs in each contiguous set */
    + __u32 spi_rcv_egrperchunk;
    + /* size in bytes of each contiguous set */
    + __u32 spi_rcv_egrchunksize;
    + /* total size of mmap to cover full rcvegrbuffers */
    + __u32 spi_rcv_egrbuftotlen;
    +} __attribute__ ((aligned(8)));
    +
    +
    +/*
    + * This version number is given to the driver by the user code during
    + * initialization in the spu_userversion field of ipath_user_info, so
    + * the driver can check for compatibility with user code.
    + *
    + * The major version changes when data structures
    + * change in an incompatible way. The driver must be the same or higher
    + * for initialization to succeed. In some cases, a higher version
    + * driver will not interoperate with older software, and initialization
    + * will return an error.
    + */
    +#define IPATH_USER_SWMAJOR 1
    +
    +/*
    + * Minor version differences are always compatible
    + * a within a major version, however if if user software is larger
    + * than driver software, some new features and/or structure fields
    + * may not be implemented; the user code must deal with this if it
    + * cares, or it must abort after initialization reports the difference
    + */
    +#define IPATH_USER_SWMINOR 2
    +
    +#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
    +
    +#define IPATH_KERN_TYPE 0
    +
    +/*
    + * Similarly, this is the kernel version going back to the user. It's
    + * slightly different, in that we want to tell if the driver was built as
    + * part of a PathScale release, or from the driver from OpenIB, kernel.org,
    + * or a standard distribution, for support reasons. The high bit is 0 for
    + * non-PathScale, and 1 for PathScale-built/supplied.
    + *
    + * It's returned by the driver to the user code during initialization in the
    + * spi_sw_version field of ipath_base_info, so the user code can in turn
    + * check for compatibility with the kernel.
    +*/
    +#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
    +
    +/*
    + * This structure is passed to ipath_userinit() to tell the driver where
    + * user code buffers are, sizes, etc. The offsets and sizes of the
    + * fields must remain unchanged, for binary compatibility. It can
    + * be extended, if userversion is changed so user code can tell, if needed
    + */
    +struct ipath_user_info {
    + /*
    + * version of user software, to detect compatibility issues.
    + * Should be set to IPATH_USER_SWVERSION.
    + */
    + __u32 spu_userversion;
    +
    + /* desired number of receive header queue entries */
    + __u32 spu_rcvhdrcnt;
    +
    + /* size of struct base_info to write to */
    + __u32 spu_base_info_size;
    +
    + /*
    + * number of words in KD protocol header
    + * This tells InfiniPath how many words to copy to rcvhdrq. If 0,
    + * kernel uses a default. Once set, attempts to set any other value
    + * are an error (EAGAIN) until driver is reloaded.
    + */
    + __u32 spu_rcvhdrsize;
    +
    + /*
    + * cache line aligned (64 byte) user address to
    + * which the rcvhdrtail register will be written by infinipath
    + * whenever it changes, so that no chip registers are read in
    + * the performance path.
    + */
    + __u64 spu_rcvhdraddr;
    +
    + /*
    + * address of struct base_info to write to
    + */
    + __u64 spu_base_info;
    +
    +} __attribute__ ((aligned(8)));
    +
    +/* User commands. */
    +
    +#define IPATH_CMD_MIN 16
    +
    +#define IPATH_CMD_USER_INIT 16 /* set up userspace */
    +#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
    +#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
    +#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
    +#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
    +#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
    +
    +#define IPATH_CMD_MAX 21
    +
    +struct ipath_port_info {
    + __u32 num_active; /* number of active units */
    + __u32 unit; /* unit (chip) assigned to caller */
    + __u32 port; /* port on unit assigned to caller */
    +};
    +
    +struct ipath_tid_info {
    + __u32 tidcnt;
    + /* make structure same size in 32 and 64 bit */
    + __u32 tid__unused;
    + /* virtual address of first page in transfer */
    + __u64 tidvaddr;
    + /* pointer (same size 32/64 bit) to __u16 tid array */
    + __u64 tidlist;
    +
    + /*
    + * pointer (same size 32/64 bit) to bitmap of TIDs used
    + * for this call; checked for being large enough at open
    + */
    + __u64 tidmap;
    +};
    +
    +struct ipath_cmd {
    + __u32 type; /* command type */
    + union {
    + struct ipath_tid_info tid_info;
    + struct ipath_user_info user_info;
    + /* address in userspace of struct ipath_port_info to
    + write result to */
    + __u64 port_info;
    + /* enable/disable receipt of packets */
    + __u32 recv_ctrl;
    + /* partition key to set */
    + __u16 part_key;
    + } cmd;
    +};
    +
    +struct ipath_iovec {
    + /* Pointer to data, but same size 32 and 64 bit */
    + __u64 iov_base;
    +
    + /*
    + * Length of data; don't need 64 bits, but want
    + * ipath_sendpkt to remain same size as before 32 bit changes, so...
    + */
    + __u64 iov_len;
    +};
    +
    +/*
    + * Describes a single packet for send. Each packet can have one or more
    + * buffers, but the total length (exclusive of IB headers) must be less
    + * than the MTU, and if using the PIO method, entire packet length,
    + * including IB headers, must be less than the ipath_piosize value (words).
    + * Use of this necessitates including sys/uio.h
    + */
    +struct __ipath_sendpkt {
    + __u32 sps_flags; /* flags for packet (TBD) */
    + __u32 sps_cnt; /* number of entries to use in sps_iov */
    + /* array of iov's describing packet. TEMPORARY */
    + struct ipath_iovec sps_iov[4];
    +};
    +
    +/* Passed into SMA special file's ->read and ->write methods. */
    +struct ipath_sma_pkt
    +{
    + __u32 unit; /* unit on which to send packet */
    + __u64 data; /* address of payload in userspace */
    + __u32 len; /* length of payload */
    +};
    +
    +/*
    + * Data layout in I2C flash (for GUID, etc.)
    + * All fields are little-endian binary unless otherwise stated
    + */
    +#define IPATH_FLASH_VERSION 1
    +struct ipath_flash {
    + /* flash layout version (IPATH_FLASH_VERSION) */
    + __u8 if_fversion;
    + /* checksum protecting if_length bytes */
    + __u8 if_csum;
    + /*
    + * valid length (in use, protected by if_csum), including
    + * if_fversion and if_sum themselves)
    + */
    + __u8 if_length;
    + /* the GUID, in network order */
    + __u8 if_guid[8];
    + /* number of GUIDs to use, starting from if_guid */
    + __u8 if_numguid;
    + /* the board serial number, in ASCII */
    + char if_serial[12];
    + /* board mfg date (YYYYMMDD ASCII) */
    + char if_mfgdate[8];
    + /* last board rework/test date (YYYYMMDD ASCII) */
    + char if_testdate[8];
    + /* logging of error counts, TBD */
    + __u8 if_errcntp[4];
    + /* powered on hours, updated at driver unload */
    + __u8 if_powerhour[2];
    + /* ASCII free-form comment field */
    + char if_comment[32];
    + /* 78 bytes used, min flash size is 128 bytes */
    + __u8 if_future[50];
    +};
    +
    +/*
    + * These are the counters implemented in the chip, and are listed in order.
    + * The InterCaps naming is taken straight from the chip spec.
    + */
    +struct infinipath_counters {
    + __u64 LBIntCnt;
    + __u64 LBFlowStallCnt;
    + __u64 Reserved1;
    + __u64 TxUnsupVLErrCnt;
    + __u64 TxDataPktCnt;
    + __u64 TxFlowPktCnt;
    + __u64 TxDwordCnt;
    + __u64 TxLenErrCnt;
    + __u64 TxMaxMinLenErrCnt;
    + __u64 TxUnderrunCnt;
    + __u64 TxFlowStallCnt;
    + __u64 TxDroppedPktCnt;
    + __u64 RxDroppedPktCnt;
    + __u64 RxDataPktCnt;
    + __u64 RxFlowPktCnt;
    + __u64 RxDwordCnt;
    + __u64 RxLenErrCnt;
    + __u64 RxMaxMinLenErrCnt;
    + __u64 RxICRCErrCnt;
    + __u64 RxVCRCErrCnt;
    + __u64 RxFlowCtrlErrCnt;
    + __u64 RxBadFormatCnt;
    + __u64 RxLinkProblemCnt;
    + __u64 RxEBPCnt;
    + __u64 RxLPCRCErrCnt;
    + __u64 RxBufOvflCnt;
    + __u64 RxTIDFullErrCnt;
    + __u64 RxTIDValidErrCnt;
    + __u64 RxPKeyMismatchCnt;
    + __u64 RxP0HdrEgrOvflCnt;
    + __u64 RxP1HdrEgrOvflCnt;
    + __u64 RxP2HdrEgrOvflCnt;
    + __u64 RxP3HdrEgrOvflCnt;
    + __u64 RxP4HdrEgrOvflCnt;
    + __u64 RxP5HdrEgrOvflCnt;
    + __u64 RxP6HdrEgrOvflCnt;
    + __u64 RxP7HdrEgrOvflCnt;
    + __u64 RxP8HdrEgrOvflCnt;
    + __u64 Reserved6;
    + __u64 Reserved7;
    + __u64 IBStatusChangeCnt;
    + __u64 IBLinkErrRecoveryCnt;
    + __u64 IBLinkDownedCnt;
    + __u64 IBSymbolErrCnt;
    +};
    +
    +/*
    + * The next set of defines are for packet headers, and chip register
    + * and memory bits that are visible to and/or used by user-mode software
    + * The other bits that are used only by the driver or diags are in
    + * ipath_registers.h
    + */
    +
    +/* RcvHdrFlags bits */
    +#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
    +#define INFINIPATH_RHF_LENGTH_SHIFT 0
    +#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
    +#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
    +#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF
    +#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
    +#define INFINIPATH_RHF_H_ICRCERR 0x80000000
    +#define INFINIPATH_RHF_H_VCRCERR 0x40000000
    +#define INFINIPATH_RHF_H_PARITYERR 0x20000000
    +#define INFINIPATH_RHF_H_LENERR 0x10000000
    +#define INFINIPATH_RHF_H_MTUERR 0x08000000
    +#define INFINIPATH_RHF_H_IHDRERR 0x04000000
    +#define INFINIPATH_RHF_H_TIDERR 0x02000000
    +#define INFINIPATH_RHF_H_MKERR 0x01000000
    +#define INFINIPATH_RHF_H_IBERR 0x00800000
    +#define INFINIPATH_RHF_L_SWA 0x00008000
    +#define INFINIPATH_RHF_L_SWB 0x00004000
    +
    +/* infinipath header fields */
    +#define INFINIPATH_I_VERS_MASK 0xF
    +#define INFINIPATH_I_VERS_SHIFT 28
    +#define INFINIPATH_I_PORT_MASK 0xF
    +#define INFINIPATH_I_PORT_SHIFT 24
    +#define INFINIPATH_I_TID_MASK 0x7FF
    +#define INFINIPATH_I_TID_SHIFT 13
    +#define INFINIPATH_I_OFFSET_MASK 0x1FFF
    +#define INFINIPATH_I_OFFSET_SHIFT 0
    +
    +/* K_PktFlags bits */
    +#define INFINIPATH_KPF_INTR 0x1
    +
    +/* SendPIO per-buffer control */
    +#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF
    +#define INFINIPATH_SP_LENGTHP1_SHIFT 0
    +#define INFINIPATH_SP_INTR 0x80000000
    +#define INFINIPATH_SP_TEST 0x40000000
    +#define INFINIPATH_SP_TESTEBP 0x20000000
    +
    +/* SendPIOAvail bits */
    +#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
    +#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
    +
    +#endif /* _IPATH_COMMON_H */
    diff -r e8d148a6ae05 -r c626556ff9d6 drivers/infiniband/hw/ipath/ipath_debug.h
    --- /dev/null Thu Jan 1 00:00:00 1970 +0000
    +++ b/drivers/infiniband/hw/ipath/ipath_debug.h Wed Mar 22 14:53:44 2006 -0800
    @@ -0,0 +1,96 @@
    +/*
    + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
    + *
    + * This software is available to you under a choice of one of two
    + * licenses. You may choose to be licensed under the terms of the GNU
    + * General Public License (GPL) Version 2, available from the file
    + * COPYING in the main directory of this source tree, or the
    + * OpenIB.org BSD license below:
    + *
    + * Redistribution and use in source and binary forms, with or
    + * without modification, are permitted provided that the following
    + * conditions are met:
    + *
    + * - Redistributions of source code must retain the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer.
    + *
    + * - Redistributions in binary form must reproduce the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer in the documentation and/or other materials
    + * provided with the distribution.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
    + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
    + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    + * SOFTWARE.
    + */
    +
    +#ifndef _IPATH_DEBUG_H
    +#define _IPATH_DEBUG_H
    +
    +#ifndef _IPATH_DEBUGGING /* debugging enabled or not */
    +#define _IPATH_DEBUGGING 1
    +#endif
    +
    +#if _IPATH_DEBUGGING
    +
    +/*
    + * Mask values for debugging. The scheme allows us to compile out any
    + * of the debug tracing stuff, and if compiled in, to enable or disable
    + * dynamically. This can be set at modprobe time also:
    + * modprobe infinipath.ko infinipath_debug=7
    + */
    +
    +#define __IPATH_INFO 0x1 /* generic low verbosity stuff */
    +#define __IPATH_DBG 0x2 /* generic debug */
    +#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */
    +/* leave some low verbosity spots open */
    +#define __IPATH_VERBDBG 0x40 /* very verbose debug */
    +#define __IPATH_PKTDBG 0x80 /* print packet data */
    +/* print process startup (init)/exit messages */
    +#define __IPATH_PROCDBG 0x100
    +/* print mmap/nopage stuff, not using VDBG any more */
    +#define __IPATH_MMDBG 0x200
    +#define __IPATH_USER_SEND 0x1000 /* use user mode send */
    +#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
    +#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
    +#define __IPATH_SMADBG 0x8000 /* sma packet debug */
    +#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) general debug on */
    +#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings on */
    +#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors on */
    +#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump on */
    +#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump on */
    +
    +#else /* _IPATH_DEBUGGING */
    +
    +/*
    + * define all of these even with debugging off, for the few places that do
    + * if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the
    + * compiler eliminate the code
    + */
    +
    +#define __IPATH_INFO 0x0 /* generic low verbosity stuff */
    +#define __IPATH_DBG 0x0 /* generic debug */
    +#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
    +#define __IPATH_VERBDBG 0x0 /* very verbose debug */
    +#define __IPATH_PKTDBG 0x0 /* print packet data */
    +#define __IPATH_PROCDBG 0x0 /* print process startup (init)/exit messages */
    +/* print mmap/nopage stuff, not using VDBG any more */
    +#define __IPATH_MMDBG 0x0
    +#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
    +#define __IPATH_SMADBG 0x0 /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
    +#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
    +#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
    +#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
    +#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
    +
    +#endif /* _IPATH_DEBUGGING */
    +
    +#define __IPATH_VERBOSEDBG __IPATH_VERBDBG
    +
    +#endif /* _IPATH_DEBUG_H */
    diff -r e8d148a6ae05 -r c626556ff9d6 drivers/infiniband/hw/ipath/ipath_kernel.h
    --- /dev/null Thu Jan 1 00:00:00 1970 +0000
    +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h Wed Mar 22 14:53:44 2006 -0800
    @@ -0,0 +1,907 @@
    +#ifndef _IPATH_KERNEL_H
    +#define _IPATH_KERNEL_H
    +/*
    + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
    + *
    + * This software is available to you under a choice of one of two
    + * licenses. You may choose to be licensed under the terms of the GNU
    + * General Public License (GPL) Version 2, available from the file
    + * COPYING in the main directory of this source tree, or the
    + * OpenIB.org BSD license below:
    + *
    + * Redistribution and use in source and binary forms, with or
    + * without modification, are permitted provided that the following
    + * conditions are met:
    + *
    + * - Redistributions of source code must retain the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer.
    + *
    + * - Redistributions in binary form must reproduce the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer in the documentation and/or other materials
    + * provided with the distribution.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
    + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
    + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    + * SOFTWARE.
    + */
    +
    +/*
    + * This header file is the base header file for infinipath kernel code
    + * ipath_user.h serves a similar purpose for user code.
    + */
    +
    +#include <linux/interrupt.h>
    +#include <asm/io.h>
    +
    +#include "ipath_common.h"
    +#include "ipath_debug.h"
    +#include "ipath_registers.h"
    +
    +/* only s/w major version of InfiniPath we can handle */
    +#define IPATH_CHIP_VERS_MAJ 2U
    +
    +/* don't care about this except printing */
    +#define IPATH_CHIP_VERS_MIN 0U
    +
    +/* temporary, maybe always */
    +extern struct infinipath_stats ipath_stats;
    +
    +#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
    +
    +struct ipath_portdata {
    + void **port_rcvegrbuf;
    + dma_addr_t *port_rcvegrbuf_phys;
    + /* rcvhdrq base, needs mmap before useful */
    + void *port_rcvhdrq;
    + /* kernel virtual address where hdrqtail is updated */
    + u64 *port_rcvhdrtail_kvaddr;
    + /* page * used for uaddr */
    + struct page *port_rcvhdrtail_pagep;
    + /*
    + * temp buffer for expected send setup, allocated at open, instead
    + * of each setup call
    + */
    + void *port_tid_pg_list;
    + /* when waiting for rcv or pioavail */
    + wait_queue_head_t port_wait;
    + /*
    + * rcvegr bufs base, physical, must fit
    + * in 44 bits so 32 bit programs mmap64 44 bit works)
    + */
    + dma_addr_t port_rcvegr_phys;
    + /* mmap of hdrq, must fit in 44 bits */
    + dma_addr_t port_rcvhdrq_phys;
    + /*
    + * the actual user address that we ipath_mlock'ed, so we can
    + * ipath_munlock it at close
    + */
    + unsigned long port_rcvhdrtail_uaddr;
    + /*
    + * number of opens on this instance (0 or 1; ignoring forks, dup,
    + * etc. for now)
    + */
    + int port_cnt;
    + /*
    + * how much space to leave at start of eager TID entries for
    + * protocol use, on each TID
    + */
    + /* instead of calculating it */
    + unsigned port_port;
    + /* chip offset of PIO buffers for this port */
    + u32 port_piobufs;
    + /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
    + u32 port_rcvegrbuf_chunks;
    + /* how many egrbufs per chunk */
    + u32 port_rcvegrbufs_perchunk;
    + /* order for port_rcvegrbuf_pages */
    + size_t port_rcvegrbuf_size;
    + /* rcvhdrq size (for freeing) */
    + size_t port_rcvhdrq_size;
    + /* next expected TID to check when looking for free */
    + u32 port_tidcursor;
    + /* next expected TID to check */
    + unsigned long port_flag;
    + /* WAIT_RCV that timed out, no interrupt */
    + u32 port_rcvwait_to;
    + /* WAIT_PIO that timed out, no interrupt */
    + u32 port_piowait_to;
    + /* WAIT_RCV already happened, no wait */
    + u32 port_rcvnowait;
    + /* WAIT_PIO already happened, no wait */
    + u32 port_pionowait;
    + /* total number of rcvhdrqfull errors */
    + u32 port_hdrqfull;
    + /* pid of process using this port */
    + pid_t port_pid;
    + /* same size as task_struct .comm[] */
    + char port_comm[16];
    + /* pkeys set by this use of this port */
    + u16 port_pkeys[4];
    + /* so file ops can get at unit */
    + struct ipath_devdata *port_dd;
    +};
    +
    +struct sk_buff;
    +
    +/*
    + * control information for layered drivers
    + */
    +struct _ipath_layer {
    + void *l_arg;
    +};
    +
    +/* Verbs layer interface */
    +struct _verbs_layer {
    + void *l_arg;
    + struct timer_list l_timer;
    +};
    +
    +typedef u64 __bitwise ipath_err_t;
    +
    +struct ipath_devdata {
    + struct list_head ipath_list;
    +
    + struct ipath_kregs const *ipath_kregs;
    + struct ipath_cregs const *ipath_cregs;
    +
    + /* mem-mapped pointer to base of chip regs */
    + u64 __iomem *ipath_kregbase;
    + /* end of mem-mapped chip space; range checking */
    + u64 __iomem *ipath_kregend;
    + /* physical address of chip for io_remap, etc. */
    + unsigned long ipath_physaddr;
    + /* base of memory alloced for ipath_kregbase, for free */
    + u64 *ipath_kregalloc;
    + /*
    + * version of kregbase that doesn't have high bits set (for 32 bit
    + * programs, so mmap64 44 bit works)
    + */
    + u64 __iomem *ipath_kregvirt;
    + /*
    + * virtual address where port0 rcvhdrqtail updated for this unit.
    + * only written to by the chip, not the driver.
    + */
    + volatile __le64 *ipath_hdrqtailptr;
    + dma_addr_t ipath_dma_addr;
    + /* ipath_cfgports pointers */
    + struct ipath_portdata **ipath_pd;
    + /* sk_buffs used by port 0 eager receive queue */
    + struct sk_buff **ipath_port0_skbs;
    + /* kvirt address of 1st 2k pio buffer */
    + void __iomem *ipath_pio2kbase;
    + /* kvirt address of 1st 4k pio buffer */
    + void __iomem *ipath_pio4kbase;
    + /*
    + * points to area where PIOavail registers will be DMA'ed.
    + * Has to be on a page of it's own, because the page will be
    + * mapped into user program space. This copy is *ONLY* ever
    + * written by DMA, not by the driver! Need a copy per device
    + * when we get to multiple devices
    + */
    + volatile __le64 *ipath_pioavailregs_dma;
    + /* physical address where updates occur */
    + dma_addr_t ipath_pioavailregs_phys;
    + struct _ipath_layer ipath_layer;
    + /* setup intr */
    + int (*ipath_f_intrsetup)(struct ipath_devdata *);
    + /* setup on-chip bus config */
    + int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
    + /* hard reset chip */
    + int (*ipath_f_reset)(struct ipath_devdata *);
    + int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
    + size_t);
    + void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
    + void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
    + size_t);
    + void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
    + int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
    + int (*ipath_f_early_init)(struct ipath_devdata *);
    + void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
    + void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
    + u32, unsigned long);
    + void (*ipath_f_tidtemplate)(struct ipath_devdata *);
    + void (*ipath_f_cleanup)(struct ipath_devdata *);
    + void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
    + /* fill out chip-specific fields */
    + int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
    + struct _verbs_layer verbs_layer;
    + /* total dwords sent (summed from counter) */
    + u64 ipath_sword;
    + /* total dwords rcvd (summed from counter) */
    + u64 ipath_rword;
    + /* total packets sent (summed from counter) */
    + u64 ipath_spkts;
    + /* total packets rcvd (summed from counter) */
    + u64 ipath_rpkts;
    + /* ipath_statusp initially points to this. */
    + u64 _ipath_status;
    + /* GUID for this interface, in network order */
    + u64 ipath_guid;
    + /*
    + * aggregrate of error bits reported since last cleared, for
    + * limiting of error reporting
    + */
    + ipath_err_t ipath_lasterror;
    + /*
    + * aggregrate of error bits reported since last cleared, for
    + * limiting of hwerror reporting
    + */
    + ipath_err_t ipath_lasthwerror;
    + /*
    + * errors masked because they occur too fast, also includes errors
    + * that are always ignored (ipath_ignorederrs)
    + */
    + ipath_err_t ipath_maskederrs;
    + /* time at which to re-enable maskederrs */
    + cycles_t ipath_unmasktime;
    + /*
    + * errors always ignored (masked), at least for a given
    + * chip/device, because they are wrong or not useful
    + */
    + ipath_err_t ipath_ignorederrs;
    + /* count of egrfull errors, combined for all ports */
    + u64 ipath_last_tidfull;
    + /* for ipath_qcheck() */
    + u64 ipath_lastport0rcv_cnt;
    + /* template for writing TIDs */
    + u64 ipath_tidtemplate;
    + /* value to write to free TIDs */
    + u64 ipath_tidinvalid;
    + /* PE-800 rcv interrupt setup */
    + u64 ipath_rhdrhead_intr_off;
    +
    + /* size of memory at ipath_kregbase */
    + u32 ipath_kregsize;
    + /* number of registers used for pioavail */
    + u32 ipath_pioavregs;
    + /* IPATH_POLL, etc. */
    + u32 ipath_flags;
    + /* ipath_flags sma is waiting for */
    + u32 ipath_sma_state_wanted;
    + /* last buffer for user use, first buf for kernel use is this
    + * index. */
    + u32 ipath_lastport_piobuf;
    + /* is a stats timer active */
    + u32 ipath_stats_timer_active;
    + /* dwords sent read from counter */
    + u32 ipath_lastsword;
    + /* dwords received read from counter */
    + u32 ipath_lastrword;
    + /* sent packets read from counter */
    + u32 ipath_lastspkts;
    + /* received packets read from counter */
    + u32 ipath_lastrpkts;
    + /* pio bufs allocated per port */
    + u32 ipath_pbufsport;
    + /*
    + * number of ports configured as max; zero is set to number chip
    + * supports, less gives more pio bufs/port, etc.
    + */
    + u32 ipath_cfgports;
    + /* port0 rcvhdrq head offset */
    + u32 ipath_port0head;
    + /* count of port 0 hdrqfull errors */
    + u32 ipath_p0_hdrqfull;
    +
    + /*
    + * (*cfgports) used to suppress multiple instances of same
    + * port staying stuck at same point
    + */
    + u32 *ipath_lastrcvhdrqtails;
    + /*
    + * (*cfgports) used to suppress multiple instances of same
    + * port staying stuck at same point
    + */
    + u32 *ipath_lastegrheads;
    + /*
    + * index of last piobuffer we used. Speeds up searching, by
    + * starting at this point. Doesn't matter if multiple cpu's use and
    + * update, last updater is only write that matters. Whenever it
    + * wraps, we update shadow copies. Need a copy per device when we
    + * get to multiple devices
    + */
    + u32 ipath_lastpioindex;
    + /* max length of freezemsg */
    + u32 ipath_freezelen;
    + /*
    + * consecutive times we wanted a PIO buffer but were unable to
    + * get one
    + */
    + u32 ipath_consec_nopiobuf;
    + /*
    + * hint that we should update ipath_pioavailshadow before
    + * looking for a PIO buffer
    + */
    + u32 ipath_upd_pio_shadow;
    + /* so we can rewrite it after a chip reset */
    + u32 ipath_pcibar0;
    + /* so we can rewrite it after a chip reset */
    + u32 ipath_pcibar1;
    + /* sequential tries for SMA send and no bufs */
    + u32 ipath_nosma_bufs;
    + /* duration (seconds) ipath_nosma_bufs set */
    + u32 ipath_nosma_secs;
    +
    + /* HT/PCI Vendor ID (here for NodeInfo) */
    + u16 ipath_vendorid;
    + /* HT/PCI Device ID (here for NodeInfo) */
    + u16 ipath_deviceid;
    + /* offset in HT config space of slave/primary interface block */
    + u8 ipath_ht_slave_off;
    + /* for write combining settings */
    + unsigned long ipath_wc_cookie;
    + /* ref count for each pkey */
    + atomic_t ipath_pkeyrefs[4];
    + /* shadow copy of all exptids physaddr; used only by funcsim */
    + u64 *ipath_tidsimshadow;
    + /* shadow copy of struct page *'s for exp tid pages */
    + struct page **ipath_pageshadow;
    + /* lock to workaround chip bug 9437 */
    + spinlock_t ipath_tid_lock;
    +
    + /*
    + * IPATH_STATUS_*,
    + * this address is mapped readonly into user processes so they can
    + * get status cheaply, whenever they want.
    + */
    + u64 *ipath_statusp;
    + /* freeze msg if hw error put chip in freeze */
    + char *ipath_freezemsg;
    + /* pci access data structure */
    + struct pci_dev *pcidev;
    + struct cdev *cdev;
    + struct class_device *class_dev;
    + /* timer used to prevent stats overflow, error throttling, etc. */
    + struct timer_list ipath_stats_timer;
    + /* check for stale messages in rcv queue */
    + /* only allow one intr at a time. */
    + unsigned long ipath_rcv_pending;
    +
    + /*
    + * Shadow copies of registers; size indicates read access size.
    + * Most of them are readonly, but some are write-only register,
    + * where we manipulate the bits in the shadow copy, and then write
    + * the shadow copy to infinipath.
    + *
    + * We deliberately make most of these 32 bits, since they have
    + * restricted range. For any that we read, we won't to generate 32
    + * bit accesses, since Opteron will generate 2 separate 32 bit HT
    + * transactions for a 64 bit read, and we want to avoid unnecessary
    + * HT transactions.
    + */
    +
    + /* This is the 64 bit group */
    +
    + /*
    + * shadow of pioavail, check to be sure it's large enough at
    + * init time.
    + */
    + unsigned long ipath_pioavailshadow[8];
    + /* shadow of kr_gpio_out, for rmw ops */
    + u64 ipath_gpio_out;
    + /* kr_revision shadow */
    + u64 ipath_revision;
    + /*
    + * shadow of ibcctrl, for interrupt handling of link changes,
    + * etc.
    + */
    + u64 ipath_ibcctrl;
    + /*
    + * last ibcstatus, to suppress "duplicate" status change messages,
    + * mostly from 2 to 3
    + */
    + u64 ipath_lastibcstat;
    + /* hwerrmask shadow */
    + ipath_err_t ipath_hwerrmask;
    + /* interrupt config reg shadow */
    + u64 ipath_intconfig;
    + /* kr_sendpiobufbase value */
    + u64 ipath_piobufbase;
    +
    + /* these are the "32 bit" regs */
    +
    + /*
    + * number of GUIDs in the flash for this interface; may need some
    + * rethinking for setting on other ifaces
    + */
    + u32 ipath_nguid;
    + /*
    + * the following two are 32-bit bitmasks, but {test,clear,set}_bit
    + * all expect bit fields to be "unsigned long"
    + */
    + /* shadow kr_rcvctrl */
    + unsigned long ipath_rcvctrl;
    + /* shadow kr_sendctrl */
    + unsigned long ipath_sendctrl;
    +
    + /* value we put in kr_rcvhdrcnt */
    + u32 ipath_rcvhdrcnt;
    + /* value we put in kr_rcvhdrsize */
    + u32 ipath_rcvhdrsize;
    + /* value we put in kr_rcvhdrentsize */
    + u32 ipath_rcvhdrentsize;
    + /* offset of last entry in rcvhdrq */
    + u32 ipath_hdrqlast;
    + /* kr_portcnt value */
    + u32 ipath_portcnt;
    + /* kr_pagealign value */
    + u32 ipath_palign;
    + /* number of "2KB" PIO buffers */
    + u32 ipath_piobcnt2k;
    + /* size in bytes of "2KB" PIO buffers */
    + u32 ipath_piosize2k;
    + /* number of "4KB" PIO buffers */
    + u32 ipath_piobcnt4k;
    + /* size in bytes of "4KB" PIO buffers */
    + u32 ipath_piosize4k;
    + /* kr_rcvegrbase value */
    + u32 ipath_rcvegrbase;
    + /* kr_rcvegrcnt value */
    + u32 ipath_rcvegrcnt;
    + /* kr_rcvtidbase value */
    + u32 ipath_rcvtidbase;
    + /* kr_rcvtidcnt value */
    + u32 ipath_rcvtidcnt;
    + /* kr_sendregbase */
    + u32 ipath_sregbase;
    + /* kr_userregbase */
    + u32 ipath_uregbase;
    + /* kr_counterregbase */
    + u32 ipath_cregbase;
    + /* shadow the control register contents */
    + u32 ipath_control;
    + /* shadow the gpio output contents */
    + u32 ipath_extctrl;
    + /* PCI revision register (HTC rev on FPGA) */
    + u32 ipath_pcirev;
    +
    + /* chip address space used by 4k pio buffers */
    + u32 ipath_4kalign;
    + /* The MTU programmed for this unit */
    + u32 ipath_ibmtu;
    + /*
    + * The max size IB packet, included IB headers that we can send.
    + * Starts same as ipath_piosize, but is affected when ibmtu is
    + * changed, or by size of eager buffers
    + */
    + u32 ipath_ibmaxlen;
    + /*
    + * ibmaxlen at init time, limited by chip and by receive buffer
    + * size. Not changed after init.
    + */
    + u32 ipath_init_ibmaxlen;
    + /* size of each rcvegrbuffer */
    + u32 ipath_rcvegrbufsize;
    + /* width (2,4,8,16,32) from HT config reg */
    + u32 ipath_htwidth;
    + /* HT speed (200,400,800,1000) from HT config */
    + u32 ipath_htspeed;
    + /* ports waiting for PIOavail intr */
    + unsigned long ipath_portpiowait;
    + /*
    + * number of sequential ibcstatus change for polling active/quiet
    + * (i.e., link not coming up).
    + */
    + u32 ipath_ibpollcnt;
    + /* low and high portions of MSI capability/vector */
    + u32 ipath_msi_lo;
    + /* saved after PCIe init for restore after reset */
    + u32 ipath_msi_hi;
    + /* MSI data (vector) saved for restore */
    + u16 ipath_msi_data;
    + /* MLID programmed for this instance */
    + u16 ipath_mlid;
    + /* LID programmed for this instance */
    + u16 ipath_lid;
    + /* list of pkeys programmed; 0 if not set */
    + u16 ipath_pkeys[4];
    + /* ASCII serial number, from flash */
    + u8 ipath_serial[12];
    + /* human readable board version */
    + u8 ipath_boardversion[80];
    + /* chip major rev, from ipath_revision */
    + u8 ipath_majrev;
    + /* chip minor rev, from ipath_revision */
    + u8 ipath_minrev;
    + /* board rev, from ipath_revision */
    + u8 ipath_boardrev;
    + /* unit # of this chip, if present */
    + int ipath_unit;
    + /* saved for restore after reset */
    + u8 ipath_pci_cacheline;
    + /* LID mask control */
    + u8 ipath_lmc;
    +};
    +
    +extern u64 *ipath_port0_rcvhdrtail;
    +extern dma_addr_t ipath_port0_rcvhdrtail_dma;
    +
    +#define IPATH_PORT0_RCVHDRTAIL_SIZE PAGE_SIZE
    +
    +extern struct list_head ipath_dev_list;
    +extern spinlock_t ipath_devs_lock;
    +extern struct ipath_devdata *ipath_lookup(int unit);
    +
    +extern u16 ipath_layer_rcv_opcode;
    +extern int ipath_verbs_registered;
    +extern int __ipath_layer_intr(struct ipath_devdata *, u32);
    +extern int ipath_layer_intr(struct ipath_devdata *, u32);
    +extern int __ipath_layer_rcv(struct ipath_devdata *, void *,
    + struct sk_buff *);
    +extern int __ipath_layer_rcv_lid(struct ipath_devdata *, void *);
    +extern int __ipath_verbs_piobufavail(struct ipath_devdata *);
    +extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32);
    +
    +void ipath_layer_add(struct ipath_devdata *);
    +void ipath_layer_del(struct ipath_devdata *);
    +
    +int ipath_init_chip(struct ipath_devdata *, int);
    +int ipath_enable_wc(struct ipath_devdata *dd);
    +void ipath_disable_wc(struct ipath_devdata *dd);
    +int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp);
    +void ipath_shutdown_device(struct ipath_devdata *);
    +
    +struct file_operations;
    +int ipath_cdev_init(int minor, char *name, struct file_operations *fops,
    + struct cdev **cdevp, struct class_device **class_devp);
    +void ipath_cdev_cleanup(struct cdev **cdevp,
    + struct class_device **class_devp);
    +
    +int ipath_diag_init(void);
    +void ipath_diag_cleanup(void);
    +void ipath_diag_bringup_link(struct ipath_devdata *);
    +
    +int ipath_sma_init(void);
    +void ipath_sma_cleanup(void);
    +
    +int ipath_user_add(struct ipath_devdata *dd);
    +void ipath_user_del(struct ipath_devdata *dd);
    +
    +struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
    +
    +/* contains pid if diags mode enabled? */
    +extern __kernel_pid_t ipath_diag_alive;
    +
    +irqreturn_t ipath_intr(int irq, void *devid, struct pt_regs *regs);
    +void ipath_decode_err(char *buf, size_t blen, ipath_err_t err);
    +#if __IPATH_INFO || __IPATH_DBG
    +extern const char *ipath_ibcstatus_str[];
    +#endif
    +
    +/* clean up any per-chip chip-specific stuff */
    +void ipath_chip_cleanup(struct ipath_devdata *);
    +/* clean up any chip type-specific stuff */
    +void ipath_chip_done(void);
    +
    +/* check to see if we have to force ordering for write combining */
    +int ipath_unordered_wc(void);
    +
    +void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
    + unsigned cnt);
    +
    +#define IPATH_SMA_HDRSZ (8+12+8) /* LRH+BTH+DETH */
    +#define IPATH_SMA_MAX_PKTSZ (IPATH_SMA_HDRSZ+256)
    +#define IPATH_NUM_SMA_PKTS 16
    +
    +int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
    +void ipath_free_pddata(struct ipath_devdata *, u32, int);
    +
    +int ipath_parse_ushort(const char *str, unsigned short *valp);
    +
    +extern unsigned ipath_sma_first;
    +extern unsigned ipath_sma_next;
    +extern __kernel_pid_t ipath_sma_alive;
    +extern spinlock_t ipath_sma_lock;
    +extern u8 ipath_sma_data_bufs[IPATH_NUM_SMA_PKTS + 1][IPATH_SMA_MAX_PKTSZ];
    +extern u8 *ipath_sma_data_spare;
    +extern wait_queue_head_t ipath_sma_wait;
    +extern wait_queue_head_t ipath_sma_state_wait;
    +
    +extern struct _ipath_sma_rpkt {
    + /* length of received packet; non-zero if queued */
    + u32 len;
    + /* unit number of interface packet was received from */
    + u32 unit;
    + u8 *buf;
    +} ipath_sma_data[IPATH_NUM_SMA_PKTS];
    +
    +int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
    +void ipath_set_ib_lstate(struct ipath_devdata *, int);
    +void ipath_kreceive(struct ipath_devdata *);
    +int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
    +int ipath_reset_device(int);
    +void ipath_get_faststats(unsigned long);
    +
    +/* for use in system calls, where we want to know device type, etc. */
    +#define port_fp(fp) ((struct ipath_portdata *) (fp)->private_data)
    +
    +/*
    + * values for ipath_flags
    + */
    +/* The chip is up and initted */
    +#define IPATH_INITTED 0x2
    + /* set if any user code has set kr_rcvhdrsize */
    +#define IPATH_RCVHDRSZ_SET 0x4
    + /* The chip is present and valid for accesses */
    +#define IPATH_PRESENT 0x8
    + /* HT link0 is only 8 bits wide, ignore upper byte crc
    + * errors, etc. */
    +#define IPATH_8BIT_IN_HT0 0x10
    + /* HT link1 is only 8 bits wide, ignore upper byte crc
    + * errors, etc. */
    +#define IPATH_8BIT_IN_HT1 0x20
    + /* The link is down */
    +#define IPATH_LINKDOWN 0x40
    + /* The link level is up (0x11) */
    +#define IPATH_LINKINIT 0x80
    + /* The link is in the armed (0x21) state */
    +#define IPATH_LINKARMED 0x100
    + /* The link is in the active (0x31) state */
    +#define IPATH_LINKACTIVE 0x200
    + /* link current state is unknown */
    +#define IPATH_LINKUNK 0x400
    + /* no IB cable, or no device on IB cable */
    +#define IPATH_NOCABLE 0x4000
    + /* Supports port zero per packet receive interrupts via
    + * GPIO */
    +#define IPATH_GPIO_INTR 0x8000
    + /* uses the coded 4byte TID, not 8 byte */
    +#define IPATH_4BYTE_TID 0x10000
    + /* packet/word counters are 32 bit, else those 4 counters
    + * are 64bit */
    +#define IPATH_32BITCOUNTERS 0x20000
    + /* can miss port0 rx interrupts */
    +#define IPATH_POLL_RX_INTR 0x40000
    +#define IPATH_DISABLED 0x80000 /* administratively disabled */
    +
    +/* portdata flag bit offsets */
    + /* waiting for a packet to arrive */
    +#define IPATH_PORT_WAITING_RCV 2
    + /* waiting for a PIO buffer to be available */
    +#define IPATH_PORT_WAITING_PIO 3
    +
    +/* free up any allocated data at closes */
    +void ipath_free_data(struct ipath_portdata *dd);
    +int ipath_waitfor_mdio_cmdready(struct ipath_devdata *);
    +int ipath_waitfor_complete(struct ipath_devdata *, ipath_kreg, u64, u64 *);
    +u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
    +/* init PE-800-specific func */
    +void ipath_init_pe800_funcs(struct ipath_devdata *);
    +/* init HT-400-specific func */
    +void ipath_init_ht400_funcs(struct ipath_devdata *);
    +void ipath_get_guid(struct ipath_devdata *);
    +u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
    +
    +/*
    + * number of words used for protocol header if not set by ipath_userinit();
    + */
    +#define IPATH_DFLT_RCVHDRSIZE 9
    +
    +#define IPATH_MDIO_CMD_WRITE 1
    +#define IPATH_MDIO_CMD_READ 2
    +#define IPATH_MDIO_CLD_DIV 25 /* to get 2.5 Mhz mdio clock */
    +#define IPATH_MDIO_CMDVALID 0x40000000 /* bit 30 */
    +#define IPATH_MDIO_DATAVALID 0x80000000 /* bit 31 */
    +#define IPATH_MDIO_CTRL_STD 0x0
    +
    +static inline u64 ipath_mdio_req(int cmd, int dev, int reg, int data)
    +{
    + return (((u64) IPATH_MDIO_CLD_DIV) << 32) |
    + (cmd << 26) |
    + (dev << 21) |
    + (reg << 16) |
    + (data & 0xFFFF);
    +}
    +
    + /* signal and fifo status, in bank 31 */
    +#define IPATH_MDIO_CTRL_XGXS_REG_8 0x8
    + /* controls loopback, redundancy */
    +#define IPATH_MDIO_CTRL_8355_REG_1 0x10
    + /* premph, encdec, etc. */
    +#define IPATH_MDIO_CTRL_8355_REG_2 0x11
    + /* Kchars, etc. */
    +#define IPATH_MDIO_CTRL_8355_REG_6 0x15
    +#define IPATH_MDIO_CTRL_8355_REG_9 0x18
    +#define IPATH_MDIO_CTRL_8355_REG_10 0x1D
    +
    +int ipath_get_user_pages(unsigned long, size_t, struct page **);
    +int ipath_get_user_pages_nocopy(unsigned long, struct page **);
    +void ipath_release_user_pages(struct page **, size_t);
    +void ipath_release_user_pages_on_close(struct page **, size_t);
    +int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
    +int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
    +
    +/* these are used for the registers that vary with port */
    +void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
    + unsigned, u64);
    +u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
    + unsigned);
    +
    +/*
    + * We could have a single register get/put routine, that takes a group type,
    + * but this is somewhat clearer and cleaner. It also gives us some error
    + * checking. 64 bit register reads should always work, but are inefficient
    + * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
    + * so we use kreg32 wherever possible. User register and counter register
    + * reads are always 32 bit reads, so only one form of those routines.
    + */
    +
    +/*
    + * At the moment, none of the s-registers are writable, so no
    + * ipath_write_sreg(), and none of the c-registers are writable, so no
    + * ipath_write_creg().
    + */
    +
    +/**
    + * ipath_read_ureg32 - read 32-bit virtualized per-port register
    + * @dd: device
    + * @regno: register number
    + * @port: port number
    + *
    + * Return the contents of a register that is virtualized to be per port.
    + * Prints a debug message and returns -1 on errors (not distinguishable from
    + * valid contents at runtime; we may add a separate error variable at some
    + * point).
    + *
    + * This is normally not used by the kernel, but may be for debugging, and
    + * has a different implementation than user mode, which is why it's not in
    + * _common.h.
    + */
    +static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
    + ipath_ureg regno, int port)
    +{
    + if (!dd->ipath_kregbase)
    + return 0;
    +
    + return readl(regno + (u64 __iomem *)
    + (dd->ipath_uregbase +
    + (char __iomem *)dd->ipath_kregbase +
    + dd->ipath_palign * port));
    +}
    +
    +/**
    + * ipath_write_ureg - write 32-bit virtualized per-port register
    + * @dd: device
    + * @regno: register number
    + * @value: value
    + * @port: port
    + *
    + * Write the contents of a register that is virtualized to be per port.
    + */
    +static inline void ipath_write_ureg(const struct ipath_devdata *dd,
    + ipath_ureg regno, u64 value, int port)
    +{
    + u64 __iomem *ubase = (u64 __iomem *)
    + (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
    + dd->ipath_palign * port);
    + if (dd->ipath_kregbase)
    + writeq(value, &ubase[regno]);
    +}
    +
    +static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
    + ipath_kreg regno)
    +{
    + if (!dd->ipath_kregbase)
    + return -1;
    + return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
    +}
    +
    +static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
    + ipath_kreg regno)
    +{
    + if (!dd->ipath_kregbase)
    + return -1;
    +
    + return readq(&dd->ipath_kregbase[regno]);
    +}
    +
    +static inline void ipath_write_kreg(const struct ipath_devdata *dd,
    + ipath_kreg regno, u64 value)
    +{
    + if (dd->ipath_kregbase)
    + writeq(value, &dd->ipath_kregbase[regno]);
    +}
    +
    +static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
    + ipath_sreg regno)
    +{
    + if (!dd->ipath_kregbase)
    + return 0;
    +
    + return readq(regno + (u64 __iomem *)
    + (dd->ipath_cregbase +
    + (char __iomem *)dd->ipath_kregbase));
    +}
    +
    +static inline uint32_t ipath_read_creg32(const struct ipath_devdata *dd,
    + ipath_sreg regno)
    +{
    + if (!dd->ipath_kregbase)
    + return 0;
    + return readl(regno + (u64 __iomem *)
    + (dd->ipath_cregbase +
    + (char __iomem *)dd->ipath_kregbase));
    +}
    +
    +/*
    + * sysfs interface.
    + */
    +
    +struct device_driver;
    +
    +extern const char ipath_core_version[];
    +
    +int ipath_driver_create_group(struct device_driver *);
    +void ipath_driver_remove_group(struct device_driver *);
    +
    +int ipath_device_create_group(struct device *, struct ipath_devdata *);
    +void ipath_device_remove_group(struct device *, struct ipath_devdata *);
    +int ipath_expose_reset(struct device *);
    +
    +int ipath_init_ipathfs(void);
    +void ipath_exit_ipathfs(void);
    +
    +/*
    + * Flush write combining store buffers (if present) and perform a write
    + * barrier.
    + */
    +#if defined(CONFIG_X86_64)
    +#define ipath_flush_wc() asm volatile("sfence" ::: "memory")
    +#else
    +#define ipath_flush_wc() wmb()
    +#endif
    +
    +extern unsigned ipath_debug; /* debugging bit mask */
    +
    +const char *ipath_get_unit_name(int unit);
    +
    +extern struct mutex ipath_mutex;
    +
    +#define IPATH_DRV_NAME "ipath_core"
    +#define IPATH_MAJOR 233
    +#define IPATH_SMA_MINOR 128
    +#define IPATH_DIAG_MINOR 129
    +#define IPATH_NMINORS 130
    +
    +#define ipath_dev_err(dd,fmt,...) \
    + do { \
    + const struct ipath_devdata *__dd = (dd); \
    + if (__dd->pcidev) \
    + dev_err(&__dd->pcidev->dev, "%s: " fmt, \
    + ipath_get_unit_name(__dd->ipath_unit), \
    + ##__VA_ARGS__); \
    + else \
    + printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
    + ipath_get_unit_name(__dd->ipath_unit), \
    + ##__VA_ARGS__); \
    + } while (0)
    +
    +#if _IPATH_DEBUGGING
    +
    +# define __IPATH_DBG_WHICH(which,fmt,...) \
    + do { \
    + if(unlikely(ipath_debug&(which))) \
    + printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
    + __func__,##__VA_ARGS__); \
    + } while(0)
    +
    +# define ipath_dbg(fmt,...) \
    + __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
    +# define ipath_cdbg(which,fmt,...) \
    + __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
    +
    +#else /* ! _IPATH_DEBUGGING */
    +
    +# define ipath_dbg(fmt,...)
    +# define ipath_cdbg(which,fmt,...)
    +
    +#endif /* _IPATH_DEBUGGING */
    +
    +#endif /* _IPATH_KERNEL_H */
    diff -r e8d148a6ae05 -r c626556ff9d6 drivers/infiniband/hw/ipath/ipath_registers.h
    --- /dev/null Thu Jan 1 00:00:00 1970 +0000
    +++ b/drivers/infiniband/hw/ipath/ipath_registers.h Wed Mar 22 14:53:44 2006 -0800
    @@ -0,0 +1,444 @@
    +/*
    + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
    + *
    + * This software is available to you under a choice of one of two
    + * licenses. You may choose to be licensed under the terms of the GNU
    + * General Public License (GPL) Version 2, available from the file
    + * COPYING in the main directory of this source tree, or the
    + * OpenIB.org BSD license below:
    + *
    + * Redistribution and use in source and binary forms, with or
    + * without modification, are permitted provided that the following
    + * conditions are met:
    + *
    + * - Redistributions of source code must retain the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer.
    + *
    + * - Redistributions in binary form must reproduce the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer in the documentation and/or other materials
    + * provided with the distribution.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
    + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
    + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    + * SOFTWARE.
    + */
    +
    +#ifndef _IPATH_REGISTERS_H
    +#define _IPATH_REGISTERS_H
    +
    +/*
    + * This file should only be included by kernel source, and by the diags.
    + * It defines the registers, and their contents, for the InfiniPath HT-400 chip
    + */
    +
    +/*
    + * These are the InfiniPath register and buffer bit definitions,
    + * that are visible to software, and needed only by the kernel
    + * and diag code. A few, that are visible to protocol and user
    + * code are in ipath_common.h. Some bits are specific
    + * to a given chip implementation, and have been moved to the
    + * chip-specific source file
    + */
    +
    +/* kr_revision bits */
    +#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF
    +#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0
    +#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF
    +#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8
    +#define INFINIPATH_R_ARCH_MASK 0xFF
    +#define INFINIPATH_R_ARCH_SHIFT 16
    +#define INFINIPATH_R_SOFTWARE_MASK 0xFF
    +#define INFINIPATH_R_SOFTWARE_SHIFT 24
    +#define INFINIPATH_R_BOARDID_MASK 0xFF
    +#define INFINIPATH_R_BOARDID_SHIFT 32
    +
    +/* kr_control bits */
    +#define INFINIPATH_C_FREEZEMODE 0x00000002
    +#define INFINIPATH_C_LINKENABLE 0x00000004
    +#define INFINIPATH_C_RESET 0x00000001
    +
    +/* kr_sendctrl bits */
    +#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
    +
    +#define IPATH_S_ABORT 0
    +#define IPATH_S_PIOINTBUFAVAIL 1
    +#define IPATH_S_PIOBUFAVAILUPD 2
    +#define IPATH_S_PIOENABLE 3
    +#define IPATH_S_DISARM 31
    +
    +#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
    +#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
    +#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
    +#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
    +#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
    +
    +/* kr_rcvctrl bits */
    +#define INFINIPATH_R_PORTENABLE_SHIFT 0
    +#define INFINIPATH_R_INTRAVAIL_SHIFT 16
    +#define INFINIPATH_R_TAILUPD 0x80000000
    +
    +/* kr_intstatus, kr_intclear, kr_intmask bits */
    +#define INFINIPATH_I_RCVURG_SHIFT 0
    +#define INFINIPATH_I_RCVAVAIL_SHIFT 12
    +#define INFINIPATH_I_ERROR 0x80000000
    +#define INFINIPATH_I_SPIOSENT 0x40000000
    +#define INFINIPATH_I_SPIOBUFAVAIL 0x20000000
    +#define INFINIPATH_I_GPIO 0x10000000
    +
    +/* kr_errorstatus, kr_errorclear, kr_errormask bits */
    +#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
    +#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
    +#define INFINIPATH_E_RICRC 0x0000000000000004ULL
    +#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
    +#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
    +#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
    +#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
    +#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
    +#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
    +#define INFINIPATH_E_REBP 0x0000000000000200ULL
    +#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
    +#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
    +#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
    +#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
    +#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
    +#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
    +#define INFINIPATH_E_RHDR 0x0000000000010000ULL
    +#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
    +#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
    +#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
    +#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
    +#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
    +#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
    +#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
    +#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
    +#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
    +#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
    +#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
    +#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
    +#define INFINIPATH_E_RESET 0x0004000000000000ULL
    +#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
    +
    +/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
    +/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
    + * RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: eagerTID, 3: expTID
    + * bit 4: flag buffer, 5: datainfo, 6: header info */
    +#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL
    +#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40
    +#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL
    +#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44
    +#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
    +#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
    +#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL
    +#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL
    +
    +/* kr_hwdiagctrl bits */
    +#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL
    +#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40
    +#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL
    +#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44
    +#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL
    +#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL
    +#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL
    +#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL
    +#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL
    +
    +/* kr_ibcctrl bits */
    +#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL
    +#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0
    +#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL
    +#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
    +#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
    +#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
    +#define INFINIPATH_IBCC_LINKINITCMD_POLL 2 /* cycle through TS1/TS2 till OK */
    +#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 /* wait for TS1, then go on */
    +#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
    +#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
    +#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */
    +#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
    +#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
    +#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
    +#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
    +#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20
    +#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL
    +#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32
    +#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL
    +#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36
    +#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL
    +#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40
    +#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL
    +#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
    +
    +/* kr_ibcstatus bits */
    +#define INFINIPATH_IBCS_LINKTRAININGSTATE_MASK 0xF
    +#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
    +#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
    +#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
    +#define INFINIPATH_IBCS_TXREADY 0x40000000
    +#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
    +/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
    +#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
    +#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
    +#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
    +#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03
    +#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04
    +#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05
    +#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08
    +#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09
    +#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a
    +#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b
    +#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
    +#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
    +#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
    +/* link state machine states (shift by INFINIPATH_IBCS_LINKSTATE_SHIFT) */
    +#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
    +#define INFINIPATH_IBCS_L_STATE_INIT 0x1
    +#define INFINIPATH_IBCS_L_STATE_ARM 0x2
    +#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
    +#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
    +
    +/* combination link status states that we use with some frequency */
    +#define IPATH_IBSTATE_MASK ((INFINIPATH_IBCS_LINKTRAININGSTATE_MASK \
    + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
    + (INFINIPATH_IBCS_LINKSTATE_MASK \
    + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
    +#define IPATH_IBSTATE_INIT ((INFINIPATH_IBCS_L_STATE_INIT \
    + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
    + (INFINIPATH_IBCS_LT_STATE_LINKUP \
    + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
    +#define IPATH_IBSTATE_ARM ((INFINIPATH_IBCS_L_STATE_ARM \
    + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
    + (INFINIPATH_IBCS_LT_STATE_LINKUP \
    + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
    +#define IPATH_IBSTATE_ACTIVE ((INFINIPATH_IBCS_L_STATE_ACTIVE \
    + << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
    + (INFINIPATH_IBCS_LT_STATE_LINKUP \
    + <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
    +
    +/* kr_extstatus bits */
    +#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
    +#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL
    +#define INFINIPATH_EXTS_GPIOIN_SHIFT 48
    +
    +/* kr_extctrl bits */
    +#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL
    +#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32
    +#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL
    +#define INFINIPATH_EXTC_GPIOOE_SHIFT 48
    +#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL
    +#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL
    +#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL
    +#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL
    +#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL
    +#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL
    +#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL
    +#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL
    +#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL
    +#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL
    +#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL
    +#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
    +#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
    +
    +/* kr_mdio bits */
    +#define INFINIPATH_MDIO_CLKDIV_MASK 0x7FULL
    +#define INFINIPATH_MDIO_CLKDIV_SHIFT 32
    +#define INFINIPATH_MDIO_COMMAND_MASK 0x7ULL
    +#define INFINIPATH_MDIO_COMMAND_SHIFT 26
    +#define INFINIPATH_MDIO_DEVADDR_MASK 0x1FULL
    +#define INFINIPATH_MDIO_DEVADDR_SHIFT 21
    +#define INFINIPATH_MDIO_REGADDR_MASK 0x1FULL
    +#define INFINIPATH_MDIO_REGADDR_SHIFT 16
    +#define INFINIPATH_MDIO_DATA_MASK 0xFFFFULL
    +#define INFINIPATH_MDIO_DATA_SHIFT 0
    +#define INFINIPATH_MDIO_CMDVALID 0x0000000040000000ULL
    +#define INFINIPATH_MDIO_RDDATAVALID 0x0000000080000000ULL
    +
    +/* kr_partitionkey bits */
    +#define INFINIPATH_PKEY_SIZE 16
    +#define INFINIPATH_PKEY_MASK 0xFFFF
    +#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF
    +
    +/* kr_serdesconfig0 bits */
    +#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
    +#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
    +#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL /* tx idle enables (per lane) */
    +#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL /* rx detect enables (per lane) */
    +#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL /* L1 Power down; use with RXDETECT,
    + Otherwise not used on IB side */
    +
    +/* kr_xgxsconfig bits */
    +#define INFINIPATH_XGXS_RESET 0x7ULL
    +#define INFINIPATH_XGXS_MDIOADDR_MASK 0xfULL
    +#define INFINIPATH_XGXS_MDIOADDR_SHIFT 4
    +
    +#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
    +
    +/* TID entries (memory), HT400-only */
    +#define INFINIPATH_RT_VALID 0x8000000000000000ULL
    +#define INFINIPATH_RT_ADDR_SHIFT 0
    +#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFF
    +#define INFINIPATH_RT_BUFSIZE_SHIFT 48
    +
    +/*
    + * IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
    + * PIO send buffers. This is well beyond anything currently
    + * defined in the InfiniBand spec.
    + */
    +#define IPATH_PIO_MAXIBHDR 128
    +
    +/* mask of defined bits for various registers */
    +extern u64
    + infinipath_i_bitsextant, infinipath_e_bitsextant, infinipath_hwe_bitsextant;
    +
    +/* masks that are different in various chips, or only exist in some chips */
    +extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
    +
    +/*
    + * register bits for selecting i2c direction and values, used for I2C serial
    + * flash
    + */
    +extern u16 ipath_gpio_sda_num, ipath_gpio_scl_num;
    +extern u64 ipath_gpio_sda, ipath_gpio_scl;
    +
    +/*
    + * These are the infinipath general register numbers (not offsets).
    + * The kernel registers are used directly, those beyond the kernel
    + * registers are calculated from one of the base registers. The use of
    + * an integer type doesn't allow type-checking as thorough as, say,
    + * an enum but allows for better hiding of chip differences.
    + */
    +typedef const u16 ipath_kreg, /* infinipath general registers */
    + ipath_creg, /* infinipath counter registers */
    + ipath_sreg; /* kernel-only, infinipath send registers */
    +
    +/*
    + * These are the chip registers common to all infinipath chips, and
    + * used both by the kernel and the diagnostics or other user code.
    + * They are all implemented such that 64 bit accesses work.
    + * Some implement no more than 32 bits. Because 64 bit reads
    + * require 2 HT cmds on opteron, we access those with 32 bit
    + * reads for efficiency (they are written as 64 bits, since
    + * the extra 32 bits are nearly free on writes, and it slightly reduces
    + * complexity). The rest are all accessed as 64 bits.
    + */
    +struct ipath_kregs {
    + /* These are the 32 bit group */
    + ipath_kreg kr_control;
    + ipath_kreg kr_counterregbase;
    + ipath_kreg kr_intmask;
    + ipath_kreg kr_intstatus;
    + ipath_kreg kr_pagealign;
    + ipath_kreg kr_portcnt;
    + ipath_kreg kr_rcvtidbase;
    + ipath_kreg kr_rcvtidcnt;
    + ipath_kreg kr_rcvegrbase;
    + ipath_kreg kr_rcvegrcnt;
    + ipath_kreg kr_scratch;
    + ipath_kreg kr_sendctrl;
    + ipath_kreg kr_sendpiobufbase;
    + ipath_kreg kr_sendpiobufcnt;
    + ipath_kreg kr_sendpiosize;
    + ipath_kreg kr_sendregbase;
    + ipath_kreg kr_userregbase;
    + /* These are the 64 bit group */
    + ipath_kreg kr_debugport;
    + ipath_kreg kr_debugportselect;
    + ipath_kreg kr_errorclear;
    + ipath_kreg kr_errormask;
    + ipath_kreg kr_errorstatus;
    + ipath_kreg kr_extctrl;
    + ipath_kreg kr_extstatus;
    + ipath_kreg kr_gpio_clear;
    + ipath_kreg kr_gpio_mask;
    + ipath_kreg kr_gpio_out;
    + ipath_kreg kr_gpio_status;
    + ipath_kreg kr_hwdiagctrl;
    + ipath_kreg kr_hwerrclear;
    + ipath_kreg kr_hwerrmask;
    + ipath_kreg kr_hwerrstatus;
    + ipath_kreg kr_ibcctrl;
    + ipath_kreg kr_ibcstatus;
    + ipath_kreg kr_intblocked;
    + ipath_kreg kr_intclear;
    + ipath_kreg kr_interruptconfig;
    + ipath_kreg kr_mdio;
    + ipath_kreg kr_partitionkey;
    + ipath_kreg kr_rcvbthqp;
    + ipath_kreg kr_rcvbufbase;
    + ipath_kreg kr_rcvbufsize;
    + ipath_kreg kr_rcvctrl;
    + ipath_kreg kr_rcvhdrcnt;
    + ipath_kreg kr_rcvhdrentsize;
    + ipath_kreg kr_rcvhdrsize;
    + ipath_kreg kr_rcvintmembase;
    + ipath_kreg kr_rcvintmemsize;
    + ipath_kreg kr_revision;
    + ipath_kreg kr_sendbuffererror;
    + ipath_kreg kr_sendpioavailaddr;
    + ipath_kreg kr_serdesconfig0;
    + ipath_kreg kr_serdesconfig1;
    + ipath_kreg kr_serdesstatus;
    + ipath_kreg kr_txintmembase;
    + ipath_kreg kr_txintmemsize;
    + ipath_kreg kr_xgxsconfig;
    + ipath_kreg kr_ibpllcfg;
    + /* use these two (and the following N ports) only with ipath_k*_kreg64_port();
    + * not *kreg64() */
    + ipath_kreg kr_rcvhdraddr;
    + ipath_kreg kr_rcvhdrtailaddr;
    +
    + /* remaining registers are not present on all types of infinipath chips */
    + ipath_kreg kr_rcvpktledcnt;
    + ipath_kreg kr_pcierbuftestreg0;
    + ipath_kreg kr_pcierbuftestreg1;
    + ipath_kreg kr_pcieq0serdesconfig0;
    + ipath_kreg kr_pcieq0serdesconfig1;
    + ipath_kreg kr_pcieq0serdesstatus;
    + ipath_kreg kr_pcieq1serdesconfig0;
    + ipath_kreg kr_pcieq1serdesconfig1;
    + ipath_kreg kr_pcieq1serdesstatus;
    +};
    +
    +struct ipath_cregs {
    + ipath_creg cr_badformatcnt;
    + ipath_creg cr_erricrccnt;
    + ipath_creg cr_errlinkcnt;
    + ipath_creg cr_errlpcrccnt;
    + ipath_creg cr_errpkey;
    + ipath_creg cr_errrcvflowctrlcnt;
    + ipath_creg cr_err_rlencnt;
    + ipath_creg cr_errslencnt;
    + ipath_creg cr_errtidfull;
    + ipath_creg cr_errtidvalid;
    + ipath_creg cr_errvcrccnt;
    + ipath_creg cr_ibstatuschange;
    + ipath_creg cr_intcnt;
    + ipath_creg cr_invalidrlencnt;
    + ipath_creg cr_invalidslencnt;
    + ipath_creg cr_lbflowstallcnt;
    + ipath_creg cr_iblinkdowncnt;
    + ipath_creg cr_iblinkerrrecovcnt;
    + ipath_creg cr_ibsymbolerrcnt;
    + ipath_creg cr_pktrcvcnt;
    + ipath_creg cr_pktrcvflowctrlcnt;
    + ipath_creg cr_pktsendcnt;
    + ipath_creg cr_pktsendflowcnt;
    + ipath_creg cr_portovflcnt;
    + ipath_creg cr_rcvebpcnt;
    + ipath_creg cr_rcvovflcnt;
    + ipath_creg cr_rxdroppktcnt;
    + ipath_creg cr_senddropped;
    + ipath_creg cr_sendstallcnt;
    + ipath_creg cr_sendunderruncnt;
    + ipath_creg cr_unsupvlcnt;
    + ipath_creg cr_wordrcvcnt;
    + ipath_creg cr_wordsendcnt;
    +};
    +
    +#endif /* _IPATH_REGISTERS_H */
    diff -r e8d148a6ae05 -r c626556ff9d6 drivers/infiniband/hw/ipath/ips_common.h
    --- /dev/null Thu Jan 1 00:00:00 1970 +0000
    +++ b/drivers/infiniband/hw/ipath/ips_common.h Wed Mar 22 14:53:44 2006 -0800
    @@ -0,0 +1,264 @@
    +#ifndef IPS_COMMON_H
    +#define IPS_COMMON_H
    +/*
    + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
    + *
    + * This software is available to you under a choice of one of two
    + * licenses. You may choose to be licensed under the terms of the GNU
    + * General Public License (GPL) Version 2, available from the file
    + * COPYING in the main directory of this source tree, or the
    + * OpenIB.org BSD license below:
    + *
    + * Redistribution and use in source and binary forms, with or
    + * without modification, are permitted provided that the following
    + * conditions are met:
    + *
    + * - Redistributions of source code must retain the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer.
    + *
    + * - Redistributions in binary form must reproduce the above
    + * copyright notice, this list of conditions and the following
    + * disclaimer in the documentation and/or other materials
    + * provided with the distribution.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
    + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
    + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
    + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    + * SOFTWARE.
    + */
    +
    +#include "ipath_common.h"
    +
    +struct ipath_header {
    + /*
    + * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
    + * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
    + * Port 3, TID 11, offset 14.
    + */
    + __u32 ver_port_tid_offset;
    + __u16 chksum;
    + __u16 pkt_flags;
    +};
    +
    +struct ips_message_header {
    + __be16 lrh[4];
    + __be32 bth[3];
    + /* fields below this point are in host byte order */
    + struct ipath_header iph;
    + __u8 sub_opcode;
    + __u8 flags;
    + __u16 src_rank;
    + /* 24 bits. The upper 8 bit is available for other use */
    + union {
    + struct {
    + unsigned ack_seq_num:24;
    + unsigned port:4;
    + unsigned unused:4;
    + };
    + __u32 ack_seq_num_org;
    + };
    + __u8 expected_tid_session_id;
    + __u8 tinylen; /* to aid MPI */
    + union {
    + __u16 tag; /* to aid MPI */
    + __u16 mqhdr; /* for PSM MQ */
    + };
    + union {
    + __u32 mpi[4]; /* to aid MPI */
    + __u32 data[4];
    + __u64 mq[2]; /* for PSM MQ */
    + struct {
    + __u16 mtu;
    + __u8 major_ver;
    + __u8 minor_ver;
    + __u32 not_used; //free
    + __u32 run_id;
    + __u32 client_ver;
    + };
    + };
    +};
    +
    +struct ether_header {
    + __be16 lrh[4];
    + __be32 bth[3];
    + /* fields below this point are in host byte order */
    + struct ipath_header iph;
    + __u8 sub_opcode;
    + __u8 cmd;
    + __u16 lid;
    + __u16 mac[3];
    + __u8 frag_num;
    + __u8 seq_num;
    + __u32 len;
    + /* MUST be of word size due to PIO write requirements */
    + __u32 csum;
    + __u16 csum_offset;
    + __u16 flags;
    + __u16 first_2_bytes;
    + __u8 unused[2]; /* currently unused */
    +};
    +
    +/*
    + * The PIO buffer used for sending infinipath messages must only be written
    + * in 32-bit words, all the data must be written, and no writes can occur
    + * after the last word is written (which transfers "ownership" of the buffer
    + * to the chip and triggers the message to be sent).
    + * Since the Linux sk_buff structure can be recursive, non-aligned, and
    + * any number of bytes in each segment, we use the following structure
    + * to keep information about the overall state of the copy operation.
    + * This is used to save the information needed to store the checksum
    + * in the right place before sending the last word to the hardware and
    + * to buffer the last 0-3 bytes of non-word sized segments.
    + */
    +struct copy_data_s {
    + struct ether_header *hdr;
    + /* addr of PIO buf to write csum to */
    + __u32 __iomem *csum_pio;
    + __u32 __iomem *to; /* addr of PIO buf to write data to */
    + __u32 device; /* which device to allocate PIO bufs from */
    + __s32 error; /* set if there is an error. */
    + __s32 extra; /* amount of data saved in u.buf below */
    + __u32 len; /* total length to send in bytes */
    + __u32 flen; /* frament length in words */
    + __u32 csum; /* partial IP checksum */
    + __u32 pos; /* position for partial checksum */
    + __u32 offset; /* offset to where data currently starts */
    + __s32 checksum_calc; /* set to 1 when csum has been calculated */
    + struct sk_buff *skb;
    + union {
    + __u32 w;
    + __u8 buf[4];
    + } u;
    +};
    +
    +/* IB - LRH header consts */
    +#define IPS_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
    +#define IPS_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
    +
    +#define IPS_OFFSET 0
    +
    +/*
    + * defines the cut-off point between the header queue and eager/expected
    + * TID queue
    + */
    +#define NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE \
    + ((sizeof(struct ips_message_header) - \
    + offsetof(struct ips_message_header, iph)) >> 2)
    +
    +/* OpCodes */
    +#define OPCODE_IPS 0xC0
    +#define OPCODE_ITH4X 0xC1
    +
    +/* OpCode 30 is use by stand-alone test programs */
    +#define OPCODE_RAW_DATA 0xDE
    +/* last OpCode (31) is reserved for test */
    +#define OPCODE_TEST 0xDF
    +
    +/* sub OpCodes - ips */
    +#define OPCODE_SEQ_DATA 0x01
    +#define OPCODE_SEQ_CTRL 0x02
    +
    +#define OPCODE_SEQ_MQ_DATA 0x03
    +#define OPCODE_SEQ_MQ_CTRL 0x04
    +
    +#define OPCODE_ACK 0x10
    +#define OPCODE_NAK 0x11
    +
    +#define OPCODE_ERR_CHK 0x20
    +#define OPCODE_ERR_CHK_PLS 0x21
    +
    +#define OPCODE_STARTUP 0x30
    +#define OPCODE_STARTUP_ACK 0x31
    +#define OPCODE_STARTUP_NAK 0x32
    +
    +#define OPCODE_STARTUP_EXT 0x34
    +#define OPCODE_STARTUP_ACK_EXT 0x35
    +#define OPCODE_STARTUP_NAK_EXT 0x36
    +
    +#define OPCODE_TIDS_RELEASE 0x40
    +#define OPCODE_TIDS_RELEASE_CONFIRM 0x41
    +
    +#define OPCODE_CLOSE 0x50
    +#define OPCODE_CLOSE_ACK 0x51
    +/*
    + * like OPCODE_CLOSE, but no complaint if other side has already closed.
    + * Used when doing abort(), MPI_Abort(), etc.
    + */
    +#define OPCODE_ABORT 0x52
    +
    +/* sub OpCodes - ith4x */
    +#define OPCODE_ENCAP 0x81
    +#define OPCODE_LID_ARP 0x82
    +
    +/* Receive Header Queue: receive type (from infinipath) */
    +#define RCVHQ_RCV_TYPE_EXPECTED 0
    +#define RCVHQ_RCV_TYPE_EAGER 1
    +#define RCVHQ_RCV_TYPE_NON_KD 2
    +#define RCVHQ_RCV_TYPE_ERROR 3
    +
    +/* misc. */
    +#define SIZE_OF_CRC 1
    +
    +#define EAGER_TID_ID INFINIPATH_I_TID_MASK
    +
    +#define IPS_DEFAULT_P_KEY 0xFFFF
    +
    +#define IPS_PERMISSIVE_LID 0xFFFF
    +#define IPS_MULTICAST_LID_BASE 0xC000
    +
    +#define IPS_AETH_CREDIT_SHIFT 24
    +#define IPS_AETH_CREDIT_MASK 0x1F
    +#define IPS_AETH_CREDIT_INVAL 0x1F
    +
    +#define IPS_PSN_MASK 0xFFFFFF
    +#define IPS_MSN_MASK 0xFFFFFF
    +#define IPS_QPN_MASK 0xFFFFFF
    +#define IPS_MULTICAST_QPN 0xFFFFFF
    +
    +/* functions for extracting fields from rcvhdrq entries */
    +static inline __u32 ips_get_hdr_err_flags(const __u32 * rbuf)
    +{
    + return __le32_to_cpu(rbuf[1]);
    +}
    +
    +static inline __u32 ips_get_index(const __u32 * rbuf)
    +{
    + return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
    + & INFINIPATH_RHF_EGRINDEX_MASK;
    +}
    +
    +static inline __u32 ips_get_rcv_type(const __u32 * rbuf)
    +{
    + return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
    + & INFINIPATH_RHF_RCVTYPE_MASK;
    +}
    +
    +static inline __u32 ips_get_length_in_bytes(const __u32 * rbuf)
    +{
    + return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
    + & INFINIPATH_RHF_LENGTH_MASK) << 2;
    +}
    +
    +static inline void *ips_get_first_protocol_header(const uint32_t * rbuf)
    +{
    + return (void *)&rbuf[2];
    +}
    +
    +static inline struct ips_message_header *ips_get_ips_header(const __u32 *
    + rbuf)
    +{
    + return (struct ips_message_header *)&rbuf[2];
    +}
    +
    +static inline __u32 ips_get_ipath_ver(__u32 hdrword)
    +{
    + return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
    + & INFINIPATH_I_VERS_MASK;
    +}
    +
    +#endif /* IPS_COMMON_H */
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2006-03-23 01:08    [W:4.276 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site