lkml.org 
[lkml]   [2006]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] 2.6 Altix : rs422 support for ioc4 serial driver

At the bottom of the email is the 'fix-up' patch to address these points.

I also threw in a few more things that needed improving (better local
names, unneeded void *'ing)..



On Fri, 17 Mar 2006, Andrew Morton wrote:

+ Pat Gefre <pfg@sgi.com> wrote:
+ >
+ > This patch adds rs422 support to the Altix ioc4 serial driver.
+ >
+ > +
+ > +#define PORT_IS_ACTIVE(_x, _y) ((_x->ip_flags & PORT_ACTIVE) \
+ > + && (_x->ip_port == _y))
+ > +
+
+ - Forgets to parenthesise macro args
+
+ - Evaluates args multiple times
+
+ - ugleeeee
+
+
+ This:
+
+ /*
+ * Nice comment goes here
+ */
+ static inline int port_is_active(struct ioc4_port *current_port,
+ struct ioc4_port *my_port)
+ {
+ ...
+ }
+
+ Is more pleasing, no?
+
+ > + if (port && PORT_IS_ACTIVE(port, the_port)) {
+
+ And in every case the test for port==NULL can be folded into port_is_active().
+
+ > +int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
+
+ Should have static scope.
+
+ > +{
+ > + int ii, jj;
+ > + struct ioc4_control *control;
+ > + struct uart_port *the_port;
+ > + struct ioc4_port *port;
+ > + struct ioc4_soft *soft;
+ > +
+ > + control = idd->idd_serial_data;
+ > +
+ > + for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
+ > + for (jj = UART_PORT_MIN; jj < UART_PORT_COUNT; jj++) {
+ > + the_port = &control->ic_port[ii].icp_uart_port[jj];
+ > + if (the_port) {
+ > + switch (jj) {
+ > + case UART_PORT_RS422:
+ > + uart_remove_one_port(&ioc4_uart_rs422,
+ > + the_port);
+ > + break;
+ > + default:
+ > + case UART_PORT_RS232:
+ > + uart_remove_one_port(&ioc4_uart_rs232,
+ > + the_port);
+ > + break;
+ > + }
+ > + }
+ > + }
+ > + port = control->ic_port[ii].icp_port;
+ > + if (!(ii & 1) && port) {
+ > + pci_free_consistent(port->ip_pdev,
+ > + TOTAL_RING_BUF_SIZE,
+ > + (void *)port->ip_cpu_ringbuf,
+ > + port->ip_dma_ringbuf);
+ > + kfree(port);
+ > + }
+ > + }
+
+ Choosing more meaningful identifiers than `ii' and `jj' would help
+ understandability here.
+
+ > + free_irq(control->ic_irq, (void *)soft);
+
+ The typecast is unneeded.
+




ioc4_serial.c | 108 +++++++++++++++++++++++++++++++++++-----------------------
1 files changed, 66 insertions(+), 42 deletions(-)


Signed-off-by: Patrick Gefre <pfg@sgi.com>


Index: linux-2.6/drivers/serial/ioc4_serial.c
===================================================================
--- linux-2.6.orig/drivers/serial/ioc4_serial.c 2006-03-17 08:47:48.000000000 -0600
+++ linux-2.6/drivers/serial/ioc4_serial.c 2006-03-22 14:18:15.946119707 -0600
@@ -514,9 +514,6 @@
#define PORT_ACTIVE 0x10
#define PORT_INACTIVE 0 /* This is the value when "off" */

-#define PORT_IS_ACTIVE(_x, _y) ((_x->ip_flags & PORT_ACTIVE) \
- && (_x->ip_port == _y))
-

/* Since each port has different register offsets and bitmasks
* for everything, we'll store those that we need in tables so we
@@ -638,6 +635,23 @@
static void receive_chars(struct uart_port *);
static void handle_intr(void *arg, uint32_t sio_ir);

+/*
+ * port_is_active - determines if this port is currently active
+ * @port: ptr to soft struct for this port
+ * @uart_port: uart port to test for
+ */
+static inline int port_is_active(struct ioc4_port *port,
+ struct uart_port *uart_port)
+{
+ if (port) {
+ if ((port->ip_flags & PORT_ACTIVE)
+ && (port->ip_port == uart_port))
+ return 1;
+ }
+ return 0;
+}
+
+
/**
* write_ireg - write the interrupt regs
* @ioc4_soft: ptr to soft struct for this port
@@ -730,19 +744,22 @@
struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
struct ioc4_control *control = idd->idd_serial_data;
struct ioc4_port *port;
- int ii, jj;
+ int port_num, port_type;

if (control) {
- for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) {
- port = control->ic_port[ii].icp_port;
+ for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS;
+ port_num++ ) {
+ port = control->ic_port[port_num].icp_port;
if (!port)
continue;
- for (jj = UART_PORT_MIN; jj < UART_PORT_COUNT; jj++) {
- if (the_port == port->ip_all_ports[jj]) {
+ for (port_type = UART_PORT_MIN;
+ port_type < UART_PORT_COUNT;
+ port_type++) {
+ if (the_port == port->ip_all_ports
+ [port_type]) {
/* set local copy */
if (set) {
- port->ip_port
- = port->ip_all_ports[jj];
+ port->ip_port = the_port;
}
return port;
}
@@ -980,7 +997,7 @@
int xx, num_intrs = 0;
int intr_type;
int handled = 0;
- struct ioc4_intr_info *ii;
+ struct ioc4_intr_info *intr_info;

soft = arg;
for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
@@ -993,13 +1010,13 @@
* which interrupt bits are set.
*/
for (xx = 0; xx < num_intrs; xx++) {
- ii = &soft->is_intr_type[intr_type].is_intr_info[xx];
- if ((this_mir = this_ir & ii->sd_bits)) {
+ intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
+ if ((this_mir = this_ir & intr_info->sd_bits)) {
/* Disable owned interrupts, call handler */
handled++;
- write_ireg(soft, ii->sd_bits, IOC4_W_IEC,
+ write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
intr_type);
- ii->sd_intr(ii->sd_info, this_mir);
+ intr_info->sd_intr(intr_info->sd_info, this_mir);
this_ir &= ~this_mir;
}
}
@@ -2376,7 +2393,7 @@
struct ioc4_port *port = get_ioc4_port(the_port, 0);
unsigned int ret = 0;

- if (port && PORT_IS_ACTIVE(port, the_port)) {
+ if (port_is_active(port, the_port)) {
if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT)
ret = TIOCSER_TEMT;
}
@@ -2392,7 +2409,7 @@
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);

- if (port && PORT_IS_ACTIVE(port, the_port))
+ if (port_is_active(port, the_port))
set_notification(port, N_OUTPUT_LOWAT, 0);
}

@@ -2446,7 +2463,7 @@
struct ioc4_port *port;

port = get_ioc4_port(the_port, 0);
- if (!port || !PORT_IS_ACTIVE(port, the_port))
+ if (!port_is_active(port, the_port))
return;

if (mctrl & TIOCM_RTS)
@@ -2474,7 +2491,7 @@
uint32_t shadow;
unsigned int ret = 0;

- if (!port || !PORT_IS_ACTIVE(port, the_port))
+ if (!port_is_active(port, the_port))
return 0;

shadow = readl(&port->ip_serial_regs->shadow);
@@ -2496,7 +2513,7 @@
{
struct ioc4_port *port = get_ioc4_port(the_port, 0);

- if (port && PORT_IS_ACTIVE(port, the_port)) {
+ if (port_is_active(port, the_port)) {
set_notification(port, N_OUTPUT_LOWAT, 1);
enable_intrs(port, port->ip_hooks->intr_tx_mt);
}
@@ -2621,9 +2638,9 @@
* @idd: IOC4 master module data for this IOC4
*/

-int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
+static int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
{
- int ii, jj;
+ int port_num, port_type;
struct ioc4_control *control;
struct uart_port *the_port;
struct ioc4_port *port;
@@ -2631,11 +2648,14 @@

control = idd->idd_serial_data;

- for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
- for (jj = UART_PORT_MIN; jj < UART_PORT_COUNT; jj++) {
- the_port = &control->ic_port[ii].icp_uart_port[jj];
+ for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+ for (port_type = UART_PORT_MIN;
+ port_type < UART_PORT_COUNT;
+ port_type++) {
+ the_port = &control->ic_port[port_num].icp_uart_port
+ [port_type];
if (the_port) {
- switch (jj) {
+ switch (port_type) {
case UART_PORT_RS422:
uart_remove_one_port(&ioc4_uart_rs422,
the_port);
@@ -2648,18 +2668,19 @@
}
}
}
- port = control->ic_port[ii].icp_port;
- if (!(ii & 1) && port) {
+ port = control->ic_port[port_num].icp_port;
+ /* we allocate in pairs */
+ if (!(port_num & 1) && port) {
pci_free_consistent(port->ip_pdev,
TOTAL_RING_BUF_SIZE,
- (void *)port->ip_cpu_ringbuf,
+ port->ip_cpu_ringbuf,
port->ip_dma_ringbuf);
kfree(port);
}
}
soft = control->ic_soft;
if (soft) {
- free_irq(control->ic_irq, (void *)soft);
+ free_irq(control->ic_irq, soft);
if (soft->is_ioc4_serial_addr) {
release_region((unsigned long)
soft->is_ioc4_serial_addr,
@@ -2686,8 +2707,8 @@
struct uart_port *the_port;
struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
struct ioc4_control *control = idd->idd_serial_data;
- int ii;
- int port_index;
+ int port_num;
+ int port_type_idx;
struct uart_driver *u_driver;


@@ -2697,17 +2718,18 @@
if (!control)
return -ENODEV;

- port_index = (port_type == PROTO_RS232) ? UART_PORT_RS232
+ port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232
: UART_PORT_RS422;

u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232
: &ioc4_uart_rs422;

/* once around for each port on this card */
- for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
- the_port = &control->ic_port[ii].icp_uart_port[port_index];
- port = control->ic_port[ii].icp_port;
- port->ip_all_ports[port_index] = the_port;
+ for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
+ the_port = &control->ic_port[port_num].icp_uart_port
+ [port_type_idx];
+ port = control->ic_port[port_num].icp_port;
+ port->ip_all_ports[port_type_idx] = the_port;

DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n",
__FUNCTION__, (void *)the_port,
@@ -2716,8 +2738,8 @@

/* membase, iobase and mapbase just need to be non-0 */
the_port->membase = (unsigned char __iomem *)1;
- the_port->iobase = (pdev->bus->number << 16) | ii;
- the_port->line = (Num_of_ioc4_cards << 2) | ii;
+ the_port->iobase = (pdev->bus->number << 16) | port_num;
+ the_port->line = (Num_of_ioc4_cards << 2) | port_num;
the_port->mapbase = port_type;
the_port->type = PORT_16550A;
the_port->fifosize = IOC4_FIFO_CHARS;
@@ -2753,7 +2775,8 @@
int ret = 0;


- DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id));
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev,
+ idd->idd_pci_id));

/* request serial registers */
tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
@@ -2775,7 +2798,8 @@
goto out2;
}
DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
- __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial));
+ __FUNCTION__, (void *)idd->idd_misc_regs,
+ (void *)serial));

/* Get memory for the new card */
control = kmalloc(sizeof(struct ioc4_control), GFP_KERNEL);
@@ -2823,7 +2847,7 @@

/* Hook up interrupt handler */
if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
- "sgi-ioc4serial", (void *)soft)) {
+ "sgi-ioc4serial", soft)) {
control->ic_irq = idd->idd_pdev->irq;
} else {
printk(KERN_WARNING

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-03-22 23:19    [W:0.054 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site