![]() | |||||||||||
Messages in this thread |
Måns Rullgård wrote:
> This is the interesting bit. Curiously enough, it is exactly the same
> as mine. I can't see any reason why it shouldn't match on your board.
>
> Try sticking some printk()s in there and find out what values are
> actually seen.
I found why it didn't work on my PC before. I wrote that I not only enabled
for every PCI id, but removed the following check:
if (likely(!asus_hides_ac97))
return;
This was the bit which made it work. After putting some debugging
information it turned out that asus_hides_ac97_lpc was called *before*
asus_hides_ac97_device, so the asus_hides_ac97 remained 0 in that check.
As far as I know this problem appears on all VT8237 boards (I found in
several forums), I suggest to completely drop the asus_hides_ac97_device
function and the above if clause.
See the debug outputs:
Inside asus_hides_ac97_lpc
asus_hides_ac97=0
device: 0x3227
PCI: enabled onboard AC97/MC97 devices
Inside asus_hides_ac97_device
vendor 0x1043
device 0x3227
Andras
--
Quanta Plus developer - http://quanta.kdewebdev.org
K Desktop Environment - http://www.kde.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
| ||||||||||
| Last update: 2006-03-19 16:13 [from the cache] ©2003-2008 | |||||||||||