Messages in this thread | | | Date | Sun, 05 Feb 2006 12:26:28 -0500 | From | Eric Buddington <> | Subject | Re: 2.6.15-mm3 hang with raid-1 |
| |
On Sun, Feb 05, 2006 at 12:14:24AM -0800, Andrew Morton wrote: > Eric Buddington <ebuddington@verizon.net> wrote: > > > > Running 2.6.15-mm3 PREEMPT on an Athlon XP, Asus motherboard with > > VT8366/A/7 chipset. > > > > I have a 240GB raid0 on hda3 and hdc1 containing a reiser3 > > filesystem. It works fine. > > > > I have a 40GB raid1 on hda2 and hdd1, which is giving me problems. I > > can write to all of hda2 and hdd1 (before creating the array) without > > error, and mdadm seems to create the array all right. > > > > However, just after the array finishes synchronizing (either after > > creation or messy reboot), all new commands hang (I can still type at > > existing shells, but as soon as I try to run a program, it becomes > > unresponsive). While hung, disk activity light is off. On reboot, the > > array is detected as clean, no synchronization is done, and my system > > works (until I try to use the raid1 array). > > > > mkreiserfs /dev/md0 also causes the hang, when it syscalls fsync(). > > > > My system disk is hda1, so I don't know if all disks are hung up, or > > just all of hda. > > > > I'm doing all this at the console, and I see no error messages. > > > > The computer keeps performing NAT, and alt-sysrq-b works. > > > > What can I do to fix or help debug this problem? > > > > Could you test -mm5 please?
using 2.6.16-rc1-mm5: - creation of reiserfs on resyncing raid1 works. - resync completes without hanging the system. - creating of reiserfs on resynced raid1 works
Looks good - thanks!
-Eric - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |