Messages in this thread | | | From | Francesco Biscani <> | Subject | Re: libata PATA drivers patch for 2.6.16-rc4 | Date | Mon, 20 Feb 2006 22:26:43 +0100 |
| |
On Monday 20 February 2006 15:19, Alan Cox wrote: > Various fixes and cleanups, some new functionality notably Promise > 20246/2026x support which although basic should get it going with disk. > Not 100% sure about ATAPI on PDC2026x yet. > > http://zeniv.linux.org.uk/~alan/IDE
Got an Ali chipset here, it booted fine.
Feb 20 22:06:17 kurtz Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Feb 20 22:06:17 kurtz ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 20 22:06:17 kurtz libata version 1.20 loaded. Feb 20 22:06:17 kurtz ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI Feb 20 22:06:17 kurtz ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040 irq 14 Feb 20 22:06:17 kurtz ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3e48 87:4023 88:203f Feb 20 22:06:17 kurtz ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48 Feb 20 22:06:17 kurtz ata1: dev 0 configured for UDMA/100 Feb 20 22:06:17 kurtz scsi0 : ali Feb 20 22:06:17 kurtz Vendor: ATA Model: IC25N040ATMR04-0 Rev: MO2O Feb 20 22:06:17 kurtz Type: Direct-Access ANSI SCSI revision: 05 Feb 20 22:06:17 kurtz ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 Feb 20 22:06:17 kurtz ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000 Feb 20 22:06:17 kurtz ata2: dev 0 ATAPI, max MWDMA2 Feb 20 22:06:17 kurtz ata2: dev 0 configured for MWDMA2 Feb 20 22:06:17 kurtz scsi1 : ali Feb 20 22:06:17 kurtz ata2(0): WARNING: ATAPI is disabled, device ignored. Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Feb 20 22:06:17 kurtz sda: Write Protect is off Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00 Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Feb 20 22:06:17 kurtz sda: Write Protect is off Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00 Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back Feb 20 22:06:17 kurtz sda: sda1 sda2 sda3 < sda5 sda6 > sda4 Feb 20 22:06:17 kurtz sd 0:0:0:0: Attached scsi disk sda
The CDROM on the second ide channel was not recognized (what's up with that WARNING?). And the HD was pretty slow (around 1-2 MB/s), I guess that's because UDMA support is not there yet?
Regards,
Francesco
-- Dr. Francesco Biscani Dipartimento di Astronomia Università di Padova biscani@pd.astro.it - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |