Messages in this thread | | | Date | Mon, 20 Feb 2006 13:04:24 +0000 | From | "Brian Marete" <> | Subject | Oops in Kernel 2.6.16-rc4 on Modprobe of saa7134.ko |
| |
Summary ----------
Oops in Kernel 2.6.16-rc4 on Modprobe of saa7134.ko
Description -----------
Modprobe(8)ing saa7134.ko causes an oops. This is repeatable and happens every time I try to load saa7134.ko. My saa7134 compatible TV card is not known by the driver, but TV has worked in pervious kernel versions with the insmod option `card=3'. The FM radio has never worked.:) I use the following insmod options for saa7134.ko:
`options saa7134 card=3 disable_ir=1'
I use the default tuner for the card, but have to pass tuner.ko the insmod option `addr=0x61' since, apparently, the tuner driver sees two addresses for the tuner.
The last kernel in which I had no trouble at all with regard to successfully saa7134.ko is 2.6.15.1.
I compiled this kernel (as well as previous kernels) with gcc-3.4.4.
Following is a detailed Bug Report, with the all the information taken immediately after the oops. (I.e. before a reboot)
Oops Message ---------------
saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 21 saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 21, latency: 32, mmio: 0xdfffdc00 saa7130[0]: subsystem: 4e42:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] saa7130[0]: board init: gpio is 39100 saa7130[0]: there are different flyvideo cards with different tuners saa7130[0]: out there, you might have to use the tuner=<nr> insmod saa7130[0]: option to override the default value. saa7130[0]: i2c eeprom 00: 42 4e 38 01 10 28 ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Unable to handle kernel NULL pointer dereference at virtual address 0000025c printing eip: d118143f *pde = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: saa7134 i2c_prosavage i2c_viapro ehci_hcd uhci_hcd usbcore 8250_pci 8250 serial_core video_buf compat_ioctl32 v4l2_common v4l1_compat ir_kbd_i2c ir_common videodev via_agp agpgart snd_via82xx snd_ac97_codec snd_ac97_bus snd_mpu401_uart snd_rawmidi snd_seq_device snd_rtctimer snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore it87 hwmon_vid hwmon i2c_isa video fan button thermal processor via_rhine uinput fuse md5 ipv6 loop rtc pcspkr ide_cd cdrom dm_mod CPU: 0 EIP: 0060:[<d118143f>] Not tainted VLI EFLAGS: 00010246 (2.6.16-rc4 #1) EIP is at saa7134_hwinit2+0x8c/0xe2 [saa7134] eax: 00000000 ebx: cc253000 ecx: 00000000 edx: 0000003f esi: cc253000 edi: cdc36400 ebp: cc2530d8 esp: c05d3e44 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 7451, threadinfo=c05d2000 task=cb24fa70) Stack: <0>cc253000 cc253000 00000000 d1181ae7 cc253000 d1180fdc 24000000 cc2530d8 cc253000 00000003 d118b1cd ffffffed cdc36400 d1199920 d119994c c02188ad cdc36400 d1198ef4 d1198ef4 d1199920 cdc36400 d119994c c02188ea d1199920 Call Trace: [<d1181ae7>] saa7134_initdev+0x332/0x799 [saa7134] [<d1180fdc>] saa7134_irq+0x0/0x2d6 [saa7134] [<c02188ad>] __pci_device_probe+0x5f/0x6d [<c02188ea>] pci_device_probe+0x2f/0x59 [<c026b26a>] driver_probe_device+0x93/0xe5 [<c026b325>] __driver_attach+0x0/0x69 [<c026b38c>] __driver_attach+0x67/0x69 [<c026a747>] bus_for_each_dev+0x58/0x78 [<c026b3b4>] driver_attach+0x26/0x2a [<c026b325>] __driver_attach+0x0/0x69 [<c026acba>] bus_add_driver+0x83/0xd1 [<c026b883>] driver_register+0x61/0x8f [<c026b80e>] klist_devices_get+0x0/0xa [<c026b818>] klist_devices_put+0x0/0xa [<c0218b33>] __pci_register_driver+0x54/0x7c [<c011be9a>] printk+0x17/0x1b [<d1182229>] saa7134_init+0x4f/0x53 [saa7134] [<c0137d75>] sys_init_module+0x138/0x1f7 [<c0102f65>] syscall_call+0x7/0xb Code: 24 04 e8 68 aa f9 ee 89 1c 24 e8 d8 81 00 00 89 1c 24 e8 74 3e 00 00 83 bb d0 00 00 00 01 ba 3f 00 00 00 75 a9 8b 8b d4 00 00 00 <8b> 81 5c 02 00 00 a9 00 00 01 00 75 0e a9 00 00 04 00 74 2e ba
Program Versions (Output from the ver_linux script) -----------------------------------------------------
Linux gamma 2.6.16-rc4 #1 PREEMPT Sun Feb 19 18:09:39 EAT 2006 i686 unknown unknown GNU/Linux
Gnu C 3.3 Gnu make 3.80 binutils 2.13.90.0.18 util-linux 2.11z mount 2.11z module-init-tools 3.1 e2fsprogs 1.35 jfsutils 1.1.1 reiserfsprogs 3.6.19 reiser4progs 1.0.5 xfsprogs 2.6.25 quota-tools 3.11. PPP 2.4.1 nfs-utils 1.0.7 Linux C Library 14 02:33 /lib/libc.so.6 Dynamic linker (ldd) 2.3.2 Linux C++ Library 5.0.3 Procps 3.2.4 Net-tools 1.60 Kbd 1.06 Sh-utils 4.5.8 udev 077 Modules Loaded saa7134 i2c_prosavage i2c_viapro ehci_hcd uhci_hcd usbcore 8250_pci 8250 serial_core video_buf compat_ioctl32 v4l2_common v4l1_compat ir_kbd_i2c ir_common videodev via_agp agpgart snd_via82xx snd_ac97_codec snd_ac97_bus snd_mpu401_uart snd_rawmidi snd_seq_device snd_rtctimer snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore it87 hwmon_vid hwmon i2c_isa video fan button thermal processor via_rhine uinput fuse md5 ipv6 loop rtc pcspkr ide_cd cdrom dm_mod
Processor Info --------------
processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Celeron(R) CPU 2.00GHz stepping : 9 cpu MHz : 2660.340 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5324.99
/proc/modules -------------------
saa7134 115552 1 - Loading 0xd1180000 i2c_prosavage 4224 0 - Live 0xd1116000 i2c_viapro 8852 0 - Live 0xd10dc000 ehci_hcd 32392 0 - Live 0xd1128000 uhci_hcd 33808 0 - Live 0xd111e000 usbcore 132484 3 ehci_hcd,uhci_hcd, Live 0xd113a000 8250_pci 21120 0 - Live 0xd10f6000 8250 24532 1 8250_pci, Live 0xd110c000 serial_core 22400 1 8250, Live 0xd1105000 video_buf 22276 1 saa7134, Live 0xd10fe000 compat_ioctl32 1408 1 saa7134, Live 0xd1004000 v4l2_common 7808 1 saa7134, Live 0xd10d9000 v4l1_compat 14212 1 saa7134, Live 0xd10f1000 ir_kbd_i2c 8716 1 saa7134, Live 0xd10d5000 ir_common 9732 2 saa7134,ir_kbd_i2c, Live 0xd1046000 videodev 9728 1 saa7134, Live 0xd1042000 via_agp 9984 1 - Live 0xd1000000 agpgart 35036 1 via_agp, Live 0xd10cb000 snd_via82xx 28180 1 - Live 0xd0fef000 snd_ac97_codec 95136 1 snd_via82xx, Live 0xd104c000 snd_ac97_bus 2304 1 snd_ac97_codec, Live 0xd0fd5000 snd_mpu401_uart 8064 1 snd_via82xx, Live 0xd0f12000 snd_rawmidi 26016 1 snd_mpu401_uart, Live 0xd0ff8000 snd_seq_device 8588 1 snd_rawmidi, Live 0xd0feb000 snd_rtctimer 3340 0 - Live 0xd0f58000 snd_pcm_oss 53280 0 - Live 0xd101e000 snd_pcm 91912 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss, Live 0xd1006000 snd_timer 25732 2 snd_rtctimer,snd_pcm, Live 0xd0f73000 snd_page_alloc 10888 2 snd_via82xx,snd_pcm, Live 0xd0fd1000 snd_mixer_oss 19584 1 snd_pcm_oss, Live 0xd0fcb000 snd 54884 11 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xd0fdc000 soundcore 10336 1 snd, Live 0xd0fc7000 it87 21284 0 - Live 0xd0f7b000 hwmon_vid 2816 1 it87, Live 0xd0f56000 hwmon 3220 1 it87, Live 0xd0f54000 i2c_isa 4736 1 it87, Live 0xd0f51000 video 16132 0 - Live 0xd0f6e000 fan 4740 0 - Live 0xd0f37000 button 6800 0 - Live 0xd0f08000 thermal 13320 0 - Live 0xd0f69000 processor 23616 1 thermal, Live 0xd0f62000 via_rhine 24836 0 - Live 0xd0f5a000 uinput 9472 0 - Live 0xd0f3b000 fuse 42764 0 - Live 0xd0f45000 md5 4096 1 - Live 0xd0f10000 ipv6 268288 27 - Live 0xd0f84000 loop 17672 0 - Live 0xd0f31000 rtc 13876 1 snd_rtctimer, Live 0xd0f2c000 pcspkr 3460 0 - Live 0xd0f0b000 ide_cd 41860 0 - Live 0xd0f20000 cdrom 40352 1 ide_cd, Live 0xd0f15000 dm_mod 56632 9 - Live 0xce836000
/proc/ioports -------------------
0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0290-0297 : it87-isa 02f8-02ff : serial 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0400-040f : 0000:00:11.0 0400-0407 : vt596_smbus 0800-087f : 0000:00:11.0 0800-0803 : PM1a_EVT_BLK 0804-0805 : PM1a_CNT_BLK 0808-080b : PM_TMR 0810-0815 : ACPI CPU throttle 0820-0823 : GPE0_BLK 0cf8-0cff : PCI conf1 d800-d8ff : 0000:00:12.0 d800-d8ff : via-rhine dc00-dcff : 0000:00:11.5 dc00-dcff : VIA8233 e000-e01f : 0000:00:10.0 e000-e01f : uhci_hcd e400-e41f : 0000:00:10.1 e400-e41f : uhci_hcd e800-e81f : 0000:00:10.2 e800-e81f : uhci_hcd ec00-ecff : 0000:00:0b.0 ec08-ec0f : serial ec10-ec17 : serial fc00-fc0f : 0000:00:11.1 fc00-fc07 : ide0 fc08-fc0f : ide1
/proc/iomem ----------------
00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cbfff : Video ROM 000f0000-000fffff : System ROM 00100000-0dfeffff : System RAM 00100000-00332c84 : Kernel code 00332c85-003de497 : Kernel data 0dff0000-0dff7fff : ACPI Tables 0dff8000-0dffffff : ACPI Non-volatile Storage cfb00000-dfbfffff : PCI Bus #01 d0000000-d7ffffff : 0000:01:00.0 d0000000-d7ffffff : savagefb dfd00000-dfefffff : PCI Bus #01 dfe70000-dfe7ffff : 0000:01:00.0 dfe80000-dfefffff : 0000:01:00.0 dfe80000-dfefffff : savagefb dfffc000-dfffcfff : 0000:00:0b.0 dfffdc00-dfffdfff : 0000:00:0a.0 dfffdc00-dfffdfff : saa7130[0] dffffe00-dffffeff : 0000:00:12.0 dffffe00-dffffeff : via-rhine dfffff00-dfffffff : 0000:00:10.3 dfffff00-dfffffff : ehci_hcd e0000000-e3ffffff : 0000:00:00.0 fec00000-fec00fff : reserved fee00000-fee00fff : reserved fff80000-ffffffff : reserved
PCI info (lspci -vvv) -----------------------
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge Subsystem: VIA Technologies, Inc.: Unknown device 0000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dfd00000-dfefffff Prefetchable memory behind bridge: cfb00000-dfbfffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) Subsystem: Unknown device 4e42:0138 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at dfffdc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=3 PME-
00:0b.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04) (prog-if 00 [Generic]) Subsystem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 15500ns max), cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at e400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin C routed to IRQ 20 Region 4: I/O ports at e800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 20 Interrupt: pin D routed to IRQ 20 Region 0: Memory at dfffff00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge Subsystem: VIA Technologies, Inc.: Unknown device 0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 255 Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) Subsystem: Elitegroup Computer Systems: Unknown device a101 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at dc00 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: Memory at dffffe00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] (prog-if 00 [VGA]) Subsystem: S3 Inc. VT8375 [ProSavage8 KM266/KL266] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at dfe70000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
I will be glad to answer any queries.
Thanks, -- B. Gitonga Marete Tel: +254-722-151-590 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |