lkml.org 
[lkml]   [2006]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Severe problem with e1000 driver in 2.4.31/32 (at least)
On Thu, 16 Feb 2006 13:49:12 -0800 (PST)
Jesse Brandeburg <jesse.brandeburg@intel.com> wrote:


> > The box runs into a BUG in e1000_hw.c line 5052. The BUG shows up because
> > the code is obviously executed inside an interrupt, which seems not
> > intended. As this BUG is always reproducable and pretty annoying we made
> > this pretty bad workaround:
>
> Please try this patch, compile tested. It matches up this particular code
> to what is currently in 2.6.16-rc
>
> e1000: fix BUG reported due to calling msec_delay in irq context
>
> There are some functions that are called in irq context that need to use
> msec_delay_irq instead to avoid a BUG.
>
> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>

Hello Jesse,

I can confirm the patch eliminates the problem here. I first thought about
doing it the same way but was unsure whether the function itself should execute
in interrupt at all.
Thank you for your immediate answer, please make sure to include the patch as
is in 2.4.

Stephan



>
> ---
>
> drivers/net/e1000/e1000_hw.c | 8 ++++----
> 1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
> --- a/drivers/net/e1000/e1000_hw.c
> +++ b/drivers/net/e1000/e1000_hw.c
> @@ -5049,7 +5049,7 @@ e1000_config_dsp_after_link_change(struc
> if(ret_val)
> return ret_val;
>
> - msec_delay(20);
> + msec_delay_irq(20);
>
> ret_val = e1000_write_phy_reg(hw, 0x0000,
> IGP01E1000_IEEE_FORCE_GIGA);
> @@ -5073,7 +5073,7 @@ e1000_config_dsp_after_link_change(struc
> if(ret_val)
> return ret_val;
>
> - msec_delay(20);
> + msec_delay_irq(20);
>
> /* Now enable the transmitter */
> ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
> @@ -5098,7 +5098,7 @@ e1000_config_dsp_after_link_change(struc
> if(ret_val)
> return ret_val;
>
> - msec_delay(20);
> + msec_delay_irq(20);
>
> ret_val = e1000_write_phy_reg(hw, 0x0000,
> IGP01E1000_IEEE_FORCE_GIGA);
> @@ -5114,7 +5114,7 @@ e1000_config_dsp_after_link_change(struc
> if(ret_val)
> return ret_val;
>
> - msec_delay(20);
> + msec_delay_irq(20);
>
> /* Now enable the transmitter */
> ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-17 14:07    [W:5.253 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site