lkml.org 
[lkml]   [2006]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: oops, 2.6.15.4 + qla1280+md+xfs+quota (fwd)
On Thu, Feb 16, 2006 at 10:30:34AM -0800, Chris Stromsoe wrote:
> I sent this to lkml yesterday. Short description of the problem -- xfs on
> 2.6.15.4 without quota enabled is ok. When I try to mount with "quota",
> the entire machine hangs. Details are below.

Could you try without 4Kstacks just for grins? Thanks.
There was a stack abuse accidentally introduced in the XFS
quota mount path a month or two back - I have a fix for that
pending so that may just be it.

EIP is at a whacky spot, and your stack trace is all messed
up - not sure how we'd get into that situation on a mount with
quotas, unless something really bizzare happened (like a stack
overflow).

cheers.

> ---------- Forwarded message ----------
> Date: Thu, 16 Feb 2006 03:10:00 -0800 (PST)
> From: Chris Stromsoe <cbs@cts.ucla.edu>
> To: linux-kernel@vger.kernel.org
> Subject: oops, 2.6.15.4 + qla1280+md+xfs+quota
>
> I have a 2.6.15.4 system that was running fine. Internal drives are using the
> Fusion MPT driver. I have two external JBODs with 12 disks each. Each JBOD has
> two channels, 6 disks per channel, and each channel is connected to a QLogic
> ISP 10160 controller.
>
> Each of the JBODs is built as an md raid5 (md1 and md2). Both raid5s are
> mirrored (md3). I had an ext3 filesystem running fine.
>
> I unmounted md3, ran "mkfs.xfs /dev/md3 && mount /dev/md3" and the system hung.
> md is built in, qla1280 and xfs are both modules. mount options in fstab are
> rw, quota, noatime -- possibly also noexec and nosuid, but I don't think they
> were enabled. XFS is built with XFS quota support; I've tried also with and
> without generic quota support. 4K stacks are enabled, if that matters. Full
> .config and dmesg output are at http://hashbrown.cts.ucla.edu/pub/oops-200602/
> (config is with generic quota, dmesg has xfs loaded as a module and /dev/md3
> mounted without quota set).
>
> I added "defaults" and removed "quota" from fstab for /dev/md3 and was able to
> mount the partition normally.
>
> It's not responsive to sysrq on the serial console. The last output (without
> generic quota) was:
>
> XFS mounting filesystem md3
> XFS quotacheck md3: Please wait.
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> c0114f5a
> *pde = 00000000
> Oops: 0000 [#1]
> SMP
> Modules linked in: xfs e1000 bonding qla1280 st
> CPU: 0
> EIP: 0060:[<c0114f5a>] Not tainted VLI
> EFLAGS: 00010006 (2.6.15.4)
> EIP is at do_page_fault+0x93/0x545
> eax: eb7ac000 ebx: 00000001 ecx: 0000007b edx: 00100100
> esi: 000001ff edi: c0114ec7 ebp: eb7ac0e8 esp: eb7ac094
> ds: 007b es: 007b ss: 0068
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel NULL pointer dereference at virtual address 00000078
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address bebaee76
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address bebaee76
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
> Unable to handle kernel paging request at virtual address 00100178
> printing eip:
>
>
> As soon as I mount the partition with quota in fstab, the machine hangs. The
> oops is not always the same. During one test run, I saw a number of "BUG: soft
> lockup detected on CPU#0" errors. The above oops is the only one I managed to
> capture.
>
>
>
> -Chris
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>

--
Nathan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-02-16 21:48    [W:0.406 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site