Messages in this thread |  | | | Subject | Re: NCR 53c700-66 MCA(EISA) doesn't want to work(2.4.x) | | From | Alan Cox <> | | Date | Sun, 12 Feb 2006 02:02:15 +0000 |
| |
On Sad, 2006-02-11 at 22:55 +0100, Zdenek Styblik wrote: > I have Intel Professional Workstation with LP468 motherboard which has > everything else except PCI. There is integrated SCSI controller NCR > 53c700-66 50pin which is probably on MCA(or EISA bus). Problem is that > I can't make it work. I tried NCR 53c7xx, 8xx support(naturally), but
I had an old panther board years and years ago although it blew up in the end and which is similar. I always used the IDE on it.
There is an NCR53C700 core driver in the SCSI layer and MCA drivers for a couple of boards but at minimum I suspect you are looking at writing a new board interface assuming you can get enough information to do so.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |