lkml.org 
[lkml]   [2006]   [Dec]   [9]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
FromOliver Neukum <>
SubjectRe: single bit errors on files stored on USB-HDDs via USB2/usb_storage
DateSat, 9 Dec 2006 09:18:26 +0100
Am Samstag, 9. Dezember 2006 07:11 schrieb Ben Nizette:
> >>> Also, you mentioned that the corruption occurs systematically on certain
> >>> byte patterns. Therefore it's certainly not related to the cables.
> >> It'd guess that too, but who can that say for sure. :-|
> > 
> > You may have a bit pattern that stresses the controllers and suddenly
> > a marginal cable may matter.
> 
> The errors occur in strings of 0xFFs.  From the USB standard:
> 
> a “1” is represented by no change in level and a “0” is represented by a 
> change in level

Yes, plus added stuffing bits.

> so this error-infested bytes are effectively long, quiet times on the 
> wire.  I would have thought this would be the _least_ stressful time for 
> the controllers but maybe they are also more susceptible to noise during 
> this period.

The longer you don't change the voltage the likelier are reciever and
transmitter to get out of sync.

	Regards
		Oliver
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-12-09 08:19    [from the cache]
©2003-2008