[lkml]   [2006]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [PATCH] powerpc: linkstation uses uimage style zImages

    Thanks for the patch. Are you actually going to test this kernel on a real
    hardware or just testing builds? If it is going to be a real life test,
    I'd be interested to know what exactly hardware, U-boot version, dts, and
    what results.

    BTW, ack-ing your patch would be a bit easier if you sent it inline.

    On Mon, 25 Dec 2006, Mark Glines wrote:

    > Once I tracked down and installed a "mkimage" command (dependency needed by
    > the WRAP line), my "make zImage" succeeded. So, I hope you guys apply this.


    > Signed-off-by: Mark Glines <>
    Acked-by: Guennadi Liakhovetski <>

    > --- linux-2.6.20-rc2/arch/powerpc/platforms/embedded6xx/Kconfig.orig 2006-12-24 19:13:49.000000000 -0800
    > +++ linux-2.6.20-rc2/arch/powerpc/platforms/embedded6xx/Kconfig 2006-12-24 19:14:02.000000000 -0800
    > @@ -79,6 +79,7 @@
    > select MPIC
    > select FSL_SOC
    > select PPC_UDBG_16550 if SERIAL_8250
    > + select DEFAULT_UIMAGE
    > help
    > Select LINKSTATION if configuring for one of PPC- (MPC8241)
    > based NAS systems from Buffalo Technology. So far only
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2006-12-25 23:57    [W:0.035 / U:55.536 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site