[lkml]   [2006]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: nforce chipset + dualcore x86-64: Oops, NMI, Null pointer deref, etc
    * Robert Hancock <> [061202 13:33]:
    > >[ 27.337641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    > >[ 27.344035] ide: Assuming 33MHz system bus speed for PIO modes;
    > >override with idebus=xx
    > >[ 27.352191] Probing IDE interface ide0...
    > >[ 28.145997] hda: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive
    > >[ 28.457643] Probing IDE interface ide1...
    > >[ 28.970267] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    > Hmm. Something seems missing here. Chipset-specific driver not enabled?
    > I don't see any references to DMA mode or the controller type. It seems
    > like in this case something in drivers/ide is blowing up later on (which
    > shouldn't happen in any case but that code is not the greatest).
    > Myself, I would try disabling CONFIG_IDE entirely and enabling the
    > corresponding new libata PATA driver for this chipset's PATA ports (for
    > nForce4 it will be pata_amd). Even if it still doesn't work it may allow
    > the real problem to be diagnosed more easily.

    Robert, thanks for taking time to look at the output.

    I am not using anything on the PATA chain, other then the DVD drive --
    which has sat idle during all of this.

    BTW, I did have this in my config already...


    Thanks for the suggestion. I can certainly disable CONFIG_IDE and try


    [unhandled content-type:application/pgp-signature]
     \ /
      Last update: 2006-12-02 20:39    [W:0.020 / U:39.924 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site