lkml.org 
[lkml]   [2006]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: hang booting onboard HPT 366 with libata (PATA)
Date

On Dec 2, 2006, at 8:03 AM, Alan wrote:

> On Sat, 2 Dec 2006 11:19:28 +0000
> Alan <alan@lxorguk.ukuu.org.uk> wrote:
>
>>> ACPI: PCI Interrup 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 16
>>> ata5: PATA max UDMA/66 cmd 0xE400 ctl 0xE802 bmdma 0xEC00 irq 16
>>> ata6: PATA max UDMA/66 cmd 0x0 ctl 0x2 bmdma 0xEC08 irq 16
>>
>> Ok so the underlying problem seems to be that the second channel
>> of the
>> card had no I/O resource assigned to it, presumably because it
>> wasn't in
>> use. We check various other "not in use" things but not that one.
>>
>> I'll fix that up. I think it just needs another check in libata-sff.
>
> Try the following

That certainly sped up the bootup process, but still hangs at the
same place. Interestingly, if I append "nosmp" to kernel params, it
hangs earlier and I get a different error. Specifics below:

ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ata3: PATA max UDMA/66 cmd 0xD800 ctl 0xDC02 bmdma 0xE000 irq 16
scsi2: pata_hpt366
ATA: abnormal status 0x8 on port 0xD807
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 16
ata4: PATA max UDMA/66 cmd 0xE400 ctl 0xE802 bmdma 0xEC00 irq 16
scsi3: pata_hpt366
ata4.00: ATA-6, max UDMA/100, 156301488 sectors: LBA48
ata4.00: configured for UDMA/33
scsi 3:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdrwr sectors (80026 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdrwr sectors (80026 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda:_

--- nosmp ---
...
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 16
ata4: PATA max UDMA/66 cmd 0xE400 ctl 0xE802 bmdma 0xEC00 irq 16
scsi3: pata_hpt366
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)

- Rick
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-12-02 19:57    [W:0.045 / U:4.476 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site